[PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb

[Rajendra Nayak]

On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
> Add device tree support for twl6030 usb driver.

twl4030?

> Update the Documentation with device tree binding information.
>
> Signed-off-by: Kishon Vijay Abraham I<kishon at ti.com>
> ---
>   .../devicetree/bindings/usb/twlxxxx-usb.txt        |   19 +++++++++++++
>   drivers/usb/otg/twl4030-usb.c                      |   28 +++++++++++++++----
>   2 files changed, 41 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> index f293271..2d069e4 100644
> --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
> @@ -16,3 +16,22 @@ twl6030-usb {
>   	regulator = "vusb";
>   	vusb-supply =<&vusb>;
>   };
> +
> +TWL4030 USB PHY AND COMPARATOR
> + - compatible : Should be "ti,twl4030-usb"
> + - interrupts : The interrupt numbers to the cpu should be specified. First
> +   interrupt number is the otg interrupt number that raises ID interrupts
> +   and VBUS interrupts. The second interrupt number is optional.
> + -<supply-name>-supply : phandle to the regulator device tree node.
> +<supply-name>  should be vusb1v5, vusb1v8 and vusb3v1
> + - usb_mode : The mode used by the phy to connect to the controller. "1"
> +   specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.

Are these standard usb phy modes or something specific to the twl4030
usb phy?

> +
> +twl4030-usb {
> +	compatible = "ti,twl4030-usb";
> +	interrupts =<  10 4>;
> +	vusb1v5-supply =<&vusb1v5>;
> +	vusb1v8-supply =<&vusb1v8>;
> +	vusb3v1-supply =<&vusb3v1>;
> +	usb_mode =<1>;
> +};
> diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
> index 523cad5..a4e7434 100644
> --- a/drivers/usb/otg/twl4030-usb.c
> +++ b/drivers/usb/otg/twl4030-usb.c
> @@ -585,23 +585,28 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
>   	struct twl4030_usb	*twl;
>   	int			status, err;
>   	struct usb_otg		*otg;
> -
> -	if (!pdata) {
> -		dev_dbg(&pdev->dev, "platform_data not available\n");
> -		return -EINVAL;
> -	}
> +	struct device_node	*np = pdev->dev.of_node;
>
>   	twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
>   	if (!twl)
>   		return -ENOMEM;
>
> +	if (np)
> +		of_property_read_u32(np, "usb_mode",
> +				(enum twl4030_usb_mode *)&twl->usb_mode);
> +	else if (pdata)
> +		twl->usb_mode = pdata->usb_mode;
> +	else {
> +		dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
> +		return -EINVAL;
> +	}
> +
>   	otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
>   	if (!otg)
>   		return -ENOMEM;
>
>   	twl->dev		=&pdev->dev;
>   	twl->irq		= platform_get_irq(pdev, 0);
> -	twl->usb_mode		= pdata->usb_mode;
>   	twl->vbus_supplied	= false;
>   	twl->asleep		= 1;
>   	twl->linkstat		= OMAP_MUSB_UNKNOWN;
> @@ -690,12 +695,23 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
>   	return 0;
>   }
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id twl4030_usb_id_table[] = {
> +	{ .compatible = "ti,twl4030-usb" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
> +#else
> +#define twl4030_usb_id_table NULL
> +#endif
> +
>   static struct platform_driver twl4030_usb_driver = {
>   	.probe		= twl4030_usb_probe,
>   	.remove		= __exit_p(twl4030_usb_remove),
>   	.driver		= {
>   		.name	= "twl4030_usb",
>   		.owner	= THIS_MODULE,
> +		.of_match_table = twl4030_usb_id_table,

use of_match_ptr().

>   	},
>   };
>