Use of the pwm-names DT property

[Thierry Reding]

On Wed, Jul 04, 2012 at 03:53:22PM +0900, Alex Courbot wrote:
> Hi Thierry,
> 
> Looking at your PWM/DT integration patches for linux-next, I was
> wondering what is the rationale behind using the pwm-names property.
> If I got it correctly, its purpose is to be able to reference
> different PWMs by name, e.g. by having
> 
> 	pwms = <&pwm 0 5000000>, <&pwm 1 5000000>;
> 	pwm-names = "backlight", "flash";
> 
> You could get the first PWM in the driver code by calling
> pwm_get(dev, "backlight") and the second through pwm_get(dev,
> "flash").

Yes, that's the way it is supposed to work.

> While I am ok with this way of doing, why not having the form that
> is already used by the regulator and gpio frameworks, in which the
> consumer is part of the property name?
> 
> 	vdd-supply = <&vdd_reg>;
> 	core-supply = <&core_reg>;
> 
> Both regulators are then accessed using regulator_get(dev, "vdd")
> and regulator_get(dev, "core").
> 
> Wouldn't it make more sense to follow the same scheme that has been
> popularized by other frameworks? It also has the advantage that you
> do not need to maintain two different properties which must be the
> same size.

In fact the *-names properties are rather common. They are used for the
reg and interrupts properties. The pinctrl subsystem and the upcoming
clock bindings also use the *-names properties. So one could just as
well argue that the regulator and gpio bindings should have been using
regulator-names and gpio-names respectively instead.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120704/043289e3/attachment.sig>