[PATCH v2 2/2] ARM: Exynos: Hook up power domains to generic power domain infrastructure
Kyungmin Park
kyungmin.park at samsung.com
Mon Jan 9 11:27:03 EST 2012
On 1/7/12, Thomas Abraham <thomas.abraham at linaro.org> wrote:
> Add support for generic power domain for Exynos4 platforms and remove the
> Samsung specific power domain control for Exynos4.
>
> The generic power domain infrastructure is used to control the power domains
> available on Exynos4. For non-dt platforms, the power domains are statically
> instantiated. For dt platforms, the power domain nodes found in the device
> tree are instantiated.
>
> Cc: Rafael J. Wysocki <rjw at sisk.pl>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
> This patch is mainly derived from Mark Brown's work on generic power domain
> support for s3c64xx platforms.
>
> arch/arm/mach-exynos/Kconfig | 10 +--
> arch/arm/mach-exynos/Makefile | 2 +-
> arch/arm/mach-exynos/dev-pd.c | 139 ---------------------
> arch/arm/mach-exynos/mach-nuri.c | 11 --
> arch/arm/mach-exynos/mach-origen.c | 14 --
> arch/arm/mach-exynos/mach-smdkv310.c | 12 --
> arch/arm/mach-exynos/mach-universal_c210.c | 17 ---
> arch/arm/mach-exynos/pm_domains.c | 183
> ++++++++++++++++++++++++++++
> 8 files changed, 185 insertions(+), 203 deletions(-)
> delete mode 100644 arch/arm/mach-exynos/dev-pd.c
> create mode 100644 arch/arm/mach-exynos/pm_domains.c
>
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index e931924..5dec134 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -32,6 +32,7 @@ config CPU_EXYNOS4210
> select ARM_CPU_SUSPEND if PM
> select S5P_PM if PM
> select S5P_SLEEP if PM
> + select PM_GENERIC_DOMAINS
> help
> Enable EXYNOS4210 CPU support
>
> @@ -72,11 +73,6 @@ config EXYNOS4_SETUP_FIMD0
> help
> Common setup code for FIMD0.
>
> -config EXYNOS4_DEV_PD
> - bool
> - help
> - Compile in platform device definitions for Power Domain
> -
> config EXYNOS4_DEV_SYSMMU
> bool
> help
> @@ -194,7 +190,6 @@ config MACH_SMDKV310
> select EXYNOS4_DEV_AHCI
> select SAMSUNG_DEV_KEYPAD
> select EXYNOS4_DEV_DMA
> - select EXYNOS4_DEV_PD
> select SAMSUNG_DEV_PWM
> select EXYNOS4_DEV_USB_OHCI
> select EXYNOS4_DEV_SYSMMU
> @@ -243,7 +238,6 @@ config MACH_UNIVERSAL_C210
> select S5P_DEV_ONENAND
> select S5P_DEV_TV
> select EXYNOS4_DEV_DMA
> - select EXYNOS4_DEV_PD
> select EXYNOS4_SETUP_FIMD0
> select EXYNOS4_SETUP_I2C1
> select EXYNOS4_SETUP_I2C3
> @@ -277,7 +271,6 @@ config MACH_NURI
> select S5P_DEV_USB_EHCI
> select S5P_SETUP_MIPIPHY
> select EXYNOS4_DEV_DMA
> - select EXYNOS4_DEV_PD
> select EXYNOS4_SETUP_FIMC
> select EXYNOS4_SETUP_FIMD0
> select EXYNOS4_SETUP_I2C1
> @@ -310,7 +303,6 @@ config MACH_ORIGEN
> select SAMSUNG_DEV_BACKLIGHT
> select SAMSUNG_DEV_PWM
> select EXYNOS4_DEV_DMA
> - select EXYNOS4_DEV_PD
> select EXYNOS4_DEV_USB_OHCI
> select EXYNOS4_SETUP_FIMD0
> select EXYNOS4_SETUP_SDHCI
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index db527ab..b7e4eca 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o pmu.o
> obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
> obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
> obj-$(CONFIG_PM) += pm.o
> +obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
> obj-$(CONFIG_CPU_IDLE) += cpuidle.o
>
> obj-$(CONFIG_SMP) += platsmp.o headsmp.o
> @@ -43,7 +44,6 @@ obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
>
> obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
> obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
> -obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
> obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
> obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
> obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
> diff --git a/arch/arm/mach-exynos/dev-pd.c b/arch/arm/mach-exynos/dev-pd.c
> deleted file mode 100644
> index 3273f25..0000000
> --- a/arch/arm/mach-exynos/dev-pd.c
> +++ /dev/null
> @@ -1,139 +0,0 @@
> -/* linux/arch/arm/mach-exynos4/dev-pd.c
> - *
> - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> - * http://www.samsung.com
> - *
> - * EXYNOS4 - Power Domain support
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> -*/
> -
> -#include <linux/io.h>
> -#include <linux/kernel.h>
> -#include <linux/platform_device.h>
> -#include <linux/delay.h>
> -
> -#include <mach/regs-pmu.h>
> -
> -#include <plat/pd.h>
> -
> -static int exynos4_pd_enable(struct device *dev)
> -{
> - struct samsung_pd_info *pdata = dev->platform_data;
> - u32 timeout;
> -
> - __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base);
> -
> - /* Wait max 1ms */
> - timeout = 10;
> - while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN)
> - != S5P_INT_LOCAL_PWR_EN) {
> - if (timeout == 0) {
> - printk(KERN_ERR "Power domain %s enable failed.\n",
> - dev_name(dev));
> - return -ETIMEDOUT;
> - }
> - timeout--;
> - udelay(100);
> - }
> -
> - return 0;
> -}
> -
> -static int exynos4_pd_disable(struct device *dev)
> -{
> - struct samsung_pd_info *pdata = dev->platform_data;
> - u32 timeout;
> -
> - __raw_writel(0, pdata->base);
> -
> - /* Wait max 1ms */
> - timeout = 10;
> - while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) {
> - if (timeout == 0) {
> - printk(KERN_ERR "Power domain %s disable failed.\n",
> - dev_name(dev));
> - return -ETIMEDOUT;
> - }
> - timeout--;
> - udelay(100);
> - }
> -
> - return 0;
> -}
> -
> -struct platform_device exynos4_device_pd[] = {
> - {
> - .name = "samsung-pd",
> - .id = 0,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_MFC_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 1,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_G3D_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 2,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_LCD0_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 3,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_LCD1_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 4,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_TV_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 5,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_CAM_CONF,
> - },
> - },
> - }, {
> - .name = "samsung-pd",
> - .id = 6,
> - .dev = {
> - .platform_data = &(struct samsung_pd_info) {
> - .enable = exynos4_pd_enable,
> - .disable = exynos4_pd_disable,
> - .base = S5P_PMU_GPS_CONF,
> - },
> - },
> - },
> -};
> diff --git a/arch/arm/mach-exynos/mach-nuri.c
> b/arch/arm/mach-exynos/mach-nuri.c
> index 3df8bf4..179a992 100644
> --- a/arch/arm/mach-exynos/mach-nuri.c
> +++ b/arch/arm/mach-exynos/mach-nuri.c
> @@ -1266,9 +1266,6 @@ static struct platform_device *nuri_devices[]
> __initdata = {
> &s5p_device_mfc,
> &s5p_device_mfc_l,
> &s5p_device_mfc_r,
> - &exynos4_device_pd[PD_MFC],
> - &exynos4_device_pd[PD_LCD0],
> - &exynos4_device_pd[PD_CAM],
> &s5p_device_fimc_md,
>
> /* NURI Devices */
> @@ -1319,14 +1316,6 @@ static void __init nuri_machine_init(void)
>
> /* Last */
> platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
> - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
> - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
> -
> - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> }
>
> MACHINE_START(NURI, "NURI")
> diff --git a/arch/arm/mach-exynos/mach-origen.c
> b/arch/arm/mach-exynos/mach-origen.c
> index 23fc5cb..da871b9 100644
> --- a/arch/arm/mach-exynos/mach-origen.c
> +++ b/arch/arm/mach-exynos/mach-origen.c
> @@ -639,13 +639,6 @@ static struct platform_device *origen_devices[]
> __initdata = {
> &s5p_device_mfc_r,
> &s5p_device_mixer,
> &exynos4_device_ohci,
> - &exynos4_device_pd[PD_LCD0],
> - &exynos4_device_pd[PD_TV],
> - &exynos4_device_pd[PD_G3D],
> - &exynos4_device_pd[PD_LCD1],
> - &exynos4_device_pd[PD_CAM],
> - &exynos4_device_pd[PD_GPS],
> - &exynos4_device_pd[PD_MFC],
> &origen_device_gpiokeys,
> &origen_lcd_hv070wsa,
> &origen_device_bluetooth,
> @@ -724,13 +717,6 @@ static void __init origen_machine_init(void)
>
> platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>
> - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
> -
> - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
> - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
> -
> - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
> -
> samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
>
> origen_bt_setup();
> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c
> b/arch/arm/mach-exynos/mach-smdkv310.c
> index bf2094e..88d1a30 100644
> --- a/arch/arm/mach-exynos/mach-smdkv310.c
> +++ b/arch/arm/mach-exynos/mach-smdkv310.c
> @@ -275,13 +275,6 @@ static struct platform_device *smdkv310_devices[]
> __initdata = {
> &s5p_device_mfc,
> &s5p_device_mfc_l,
> &s5p_device_mfc_r,
> - &exynos4_device_pd[PD_MFC],
> - &exynos4_device_pd[PD_G3D],
> - &exynos4_device_pd[PD_LCD0],
> - &exynos4_device_pd[PD_LCD1],
> - &exynos4_device_pd[PD_CAM],
> - &exynos4_device_pd[PD_TV],
> - &exynos4_device_pd[PD_GPS],
> &exynos4_device_spdif,
> &exynos4_device_sysmmu,
> &samsung_asoc_dma,
> @@ -334,10 +327,6 @@ static void s5p_tv_setup(void)
> WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
> s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
> s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
> -
> - /* setup dependencies between TV devices */
> - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
> - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
> }
>
> static void __init smdkv310_map_io(void)
> @@ -377,7 +366,6 @@ static void __init smdkv310_machine_init(void)
> clk_xusbxti.rate = 24000000;
>
> platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
> - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
> }
>
> MACHINE_START(SMDKV310, "SMDKV310")
> diff --git a/arch/arm/mach-exynos/mach-universal_c210.c
> b/arch/arm/mach-exynos/mach-universal_c210.c
> index c38e18d..28d8f02 100644
> --- a/arch/arm/mach-exynos/mach-universal_c210.c
> +++ b/arch/arm/mach-exynos/mach-universal_c210.c
> @@ -968,7 +968,6 @@ static struct platform_device *universal_devices[]
> __initdata = {
> &s3c_device_i2c5,
> &s5p_device_i2c_hdmiphy,
> &hdmi_fixed_voltage,
> - &exynos4_device_pd[PD_TV],
> &s5p_device_hdmi,
> &s5p_device_sdo,
> &s5p_device_mixer,
> @@ -981,9 +980,6 @@ static struct platform_device *universal_devices[]
> __initdata = {
> &s5p_device_mfc,
> &s5p_device_mfc_l,
> &s5p_device_mfc_r,
> - &exynos4_device_pd[PD_MFC],
> - &exynos4_device_pd[PD_LCD0],
> - &exynos4_device_pd[PD_CAM],
> &cam_i_core_fixed_reg_dev,
> &cam_s_if_fixed_reg_dev,
> &s5p_device_fimc_md,
> @@ -1002,10 +998,6 @@ void s5p_tv_setup(void)
> gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
> s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
> s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
> -
> - /* setup dependencies between TV devices */
> - s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev;
> - s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev;
> }
>
> static void __init universal_reserve(void)
> @@ -1039,15 +1031,6 @@ static void __init universal_machine_init(void)
>
> /* Last */
> platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
> -
> - s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
> - s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
> -
> - s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> - s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
> }
>
> MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
> diff --git a/arch/arm/mach-exynos/pm_domains.c
> b/arch/arm/mach-exynos/pm_domains.c
> new file mode 100644
> index 0000000..95a7c55
> --- /dev/null
> +++ b/arch/arm/mach-exynos/pm_domains.c
> @@ -0,0 +1,183 @@
> +/*
> + * Exynos4 Generic power domain support.
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Implementation of Exynos4 specific power domain control which is used in
> + * conjunction with runtime-pm. Support for both device-tree and
> non-device-tree
> + * based power domain support is included.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +#include <linux/pm_domain.h>
> +#include <linux/delay.h>
> +#include <linux/of_address.h>
> +
> +#include <mach/regs-pmu.h>
> +#include <plat/devs.h>
> +
> +/*
> + * Exynos4 specific wrapper around the generic power domain
> + */
> +struct exynos4_pm_domain {
> + void __iomem *base;
> + char const *name;
> + bool is_off;
> + struct generic_pm_domain pd;
> +};
Even though you tested it at exynos4, we already know exynos5 will be used soon.
so start to use the exynos prefix if possible.
> +
> +static int exynos4_pd_power(struct generic_pm_domain *domain, bool
> power_on)
exynos_pd_power
> +{
> + struct exynos4_pm_domain *pd;
> + void __iomem *base;
> + u32 timeout, pwr;
> + char *op;
> +
> + pd = container_of(domain, struct exynos4_pm_domain, pd);
> + base = pd->base;
> +
> + pwr = (power_on) ? S5P_INT_LOCAL_PWR_EN : 0;
> + __raw_writel(pwr, base);
> +
> + /* Wait max 1ms */
> + timeout = 10;
> +
> + while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN) != pwr) {
> + if (!timeout) {
> + op = (power_on) ? "enable" : "disable";
> + pr_err("Power domain %s %s failed\n", op, domain->name);
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + cpu_relax();
> + usleep_range(80, 100);
> + }
> + return 0;
> +}
> +
> +static int exynos4_pd_power_on(struct generic_pm_domain *domain)
> +{
> + return exynos4_pd_power(domain, true);
> +}
> +
> +static int exynos4_pd_power_off(struct generic_pm_domain *domain)
> +{
> + return exynos4_pd_power(domain, false);
> +}
ditto
> +
> +
> +#define EXYNOS4_GPD(PD, BASE, NAME) \
> +static struct exynos4_pm_domain PD = { \
> + .base = (void __iomem *)BASE, \
> + .name = NAME, \
> + .pd = { \
> + .power_off = exynos4_pd_power_off, \
> + .power_on = exynos4_pd_power_on, \
> + }, \
> +}
> +
> +EXYNOS4_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc");
In this case, it's right to use the exynos4_pd_* as you wrote.
> +EXYNOS4_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d");
> +EXYNOS4_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0");
> +EXYNOS4_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1");
As you know, it's exynos4 series only now.
> +EXYNOS4_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv");
> +EXYNOS4_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam");
> +EXYNOS4_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps");
> +
> +static struct exynos4_pm_domain *exynos4_pm_domains[] = {
> + &exynos4_pd_mfc,
> + &exynos4_pd_g3d,
> + &exynos4_pd_lcd0,
> + &exynos4_pd_lcd1,
> + &exynos4_pd_tv,
> + &exynos4_pd_cam,
> + &exynos4_pd_gps,
> +};
> +
> +static __init int exynos4_pm_init_power_domain(void)
> +{
> + int idx;
> + struct device_node *np;
The np is only used at CONFIG_ON.
> +
> +#ifdef CONFIG_OF
> + if (!of_have_populated_dt())
> + goto no_dt;
> +
> + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
> + struct exynos4_pm_domain *pd;
> +
> + pd = kzalloc(sizeof(*pd), GFP_KERNEL);
> + if (!pd) {
> + pr_err("exynos4_pm_init_power_domain: failed to "
> + "allocate memory for domain\n");
> + return -ENOMEM;
> + }
> +
> + if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
> + pd->is_off = true;
> + pd->name = np->name;
> + pd->base = of_iomap(np, 0);
> + pd->pd.power_off = exynos4_pd_power_off;
> + pd->pd.power_on = exynos4_pd_power_on;
> + pd->pd.of_node = np;
> + pm_genpd_init(&pd->pd, NULL, false);
> + }
> + return 0;
> +#endif /* CONFIG_OF */
> +
> + no_dt:
You should add the "#endif /* CONFIG_OF */ since no_dt is used at
CONFIG_OF case.
> + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
> + pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
> + exynos4_pm_domains[idx]->is_off);
> +
> +#ifdef CONFIG_S5P_DEV_FIMD0
> + if (pm_genpd_add_device(&exynos4_pd_lcd0.pd, &s5p_device_fimd0.dev))
> + pr_info("error in adding fimd0 to lcd0 power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_TV
> + if (pm_genpd_add_device(&exynos4_pd_tv.pd, &s5p_device_hdmi.dev))
> + pr_info("error in adding hdmi to tv power domain\n");
> + if (pm_genpd_add_device(&exynos4_pd_tv.pd, &s5p_device_mixer.dev))
> + pr_info("error in adding mixer to tv power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_MFC
> + if (pm_genpd_add_device(&exynos4_pd_mfc.pd, &s5p_device_mfc.dev))
> + pr_info("error in adding mfc to mfc power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_FIMC0
> + if (pm_genpd_add_device(&exynos4_pd_cam.pd, &s5p_device_fimc0.dev))
> + pr_info("error in adding fimc0 to cam power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_FIMC1
> + if (pm_genpd_add_device(&exynos4_pd_cam.pd, &s5p_device_fimc1.dev))
> + pr_info("error in adding fimc1 to cam power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_FIMC2
> + if (pm_genpd_add_device(&exynos4_pd_cam.pd, &s5p_device_fimc2.dev))
> + pr_info("error in adding fimc2 to cam power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_FIMC3
> + if (pm_genpd_add_device(&exynos4_pd_cam.pd, &s5p_device_fimc3.dev))
> + pr_info("error in adding fimc3 to cam power domain\n");
> +#endif
> +#ifdef CONFIG_S5P_DEV_CSIS0
> + if (pm_genpd_add_device(&exynos4_pd_cam.pd, &s5p_device_mipi_csis0.dev))
> + pr_info("error in adding csis0 to cam power domain\n");
> +#endif
Also need to add CSIS1 as Sylwester mentioned.
> + return 0;
> +}
> +arch_initcall(exynos4_pm_init_power_domain);
> +
> +static __init int exynos4_pm_late_initcall(void)
> +{
> + pm_genpd_poweroff_unused();
> + return 0;
> +}
> +late_initcall(exynos4_pm_late_initcall);
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the devicetree-discuss
mailing list