[PATCHv5 0/4] Synopsys DesignWare APB GPIO

[Jamie Iles]

No major changes since v4 apart from a bug in patch 2 that didn't handle
sparsely allocated banks very well (resulting in a potential buffer
overrun) and the higher banks are the ones that are a pig to get to.

Jamie Iles (4):
  of: document common interrupt controller details
  gpio: add a driver for the Synopsys DesignWare APB GPIO block
  gpio: dwapb: add support for GPIO interrupts
  ARM: picoxcell: use new Synopsys Designware GPIO binding

 Documentation/devicetree/bindings/arm/gic.txt      |    8 +-
 .../devicetree/bindings/gpio/snps-dwapb-gpio.txt   |   57 ++++
 Documentation/devicetree/bindings/interrupts.txt   |   17 +
 arch/arm/boot/dts/picoxcell-pc3x2.dtsi             |   19 +-
 arch/arm/boot/dts/picoxcell-pc3x3.dtsi             |   28 +-
 drivers/gpio/Kconfig                               |    9 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-dwapb.c                          |  351 ++++++++++++++++++++
 8 files changed, 456 insertions(+), 34 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/interrupts.txt
 create mode 100644 drivers/gpio/gpio-dwapb.c

-- 
1.7.5.4