[PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
Grant Likely
grant.likely at secretlab.ca
Thu Jan 5 07:11:11 EST 2012
On Tue, Dec 6, 2011 at 9:49 AM, Benoit Cousson <b-cousson at ti.com> wrote:
> devicetree will become the mandatory boot method for OMAP2+.
> In order to avoid cluttering the OMAP code with #ifdef CONFIG_OF,
> select USE_OF by default for every OMAP2+ systems.
> Select as well the APPENDED_DTB and ATAG_DTB_COMPAT to allow legacy
> boot loader to keep working properly.
>
> Enable PROC_DEVICETREE as well.
>
> Signed-off-by: Benoit Cousson <b-cousson at ti.com>
> Cc: Tony Lindgren <tony at atomide.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
> ---
> arch/arm/mach-omap2/Kconfig | 1 -
> arch/arm/plat-omap/Kconfig | 4 ++++
> 2 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index e1293aa..056a812 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -109,7 +109,6 @@ comment "OMAP Board Type"
> config MACH_OMAP_GENERIC
> bool "Generic OMAP2+ board"
> depends on ARCH_OMAP2PLUS
> - select USE_OF
> default y
> help
> Support for generic TI OMAP2+ boards using Flattened Device Tree.
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index aa59f42..74f41dc 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -24,6 +24,10 @@ config ARCH_OMAP2PLUS
> select CLKDEV_LOOKUP
> select GENERIC_IRQ_CHIP
> select OMAP_DM_TIMER
> + select USE_OF
> + select ARM_APPENDED_DTB
> + select ARM_ATAG_DTB_COMPAT
> + select PROC_DEVICETREE
> help
> "Systems based on OMAP2, OMAP3 or OMAP4"
>
> --
> 1.7.0.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
More information about the devicetree-discuss
mailing list