[PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree

[Rajendra Nayak]

On Friday 24 February 2012 05:02 PM, T Krishnamoorthy, Balaji wrote:
> On Thu, Feb 23, 2012 at 5:31 PM, Rajendra Nayak<rnayak at ti.com>  wrote:
>> Define dt bindings for the ti-omap-hsmmc, and adapt
>> the driver to extract data (which was earlier passed as
>> platform_data) from device tree.
>>
>> Signed-off-by: Rajendra Nayak<rnayak at ti.com>
>> ---
>>   .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      |   31 +++++++++
>>   drivers/mmc/host/omap_hsmmc.c                      |   68 ++++++++++++++++++++
>>   2 files changed, 99 insertions(+), 0 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
>> new file mode 100644
>> index 0000000..e4fa8f0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
>> @@ -0,0 +1,31 @@
>> +* TI Highspeed MMC host controller for OMAP
>> +
>> +The Highspeed MMC Host Controller on TI OMAP family
>> +provides an interface for MMC, SD, and SDIO types of memory cards.
>> +
>> +Required properties:
>> +- compatible:
>> + Should be "ti,omap2-hsmmc", for OMAP2/3 controllers
>
> omap_hsmmc is applicable for omap2430 and omap3.
> omap2420 has non high speed controller mmci-omap - drivers/mmc/host/omap.c
> May be omap3-hsmmc compatible with omap2430 ?

Agree. I think its best in that case for me to define a
compatible "ti,omap2430-hsmmc" for omap2430 and "ti,omap3-hsmmc"
for omap3. Though the IP blocks are same, I cant think of some
common compatible string without causing confusion.

>
>> + Should be "ti,omap4-hsmmc", for OMAP4 controllers
>> +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
>> +- reg : should contain hsmmc registers location and length
>> +
>> +Optional properties:
>> +ti,dual-volt: boolean, supports dual voltage cards
>> +<supply-name>-supply: phandle to the regulator device tree node
>> +"supply-name" examples are "vmmc", "vmmc_aux" etc
>> +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
>> +cd-gpios: GPIOs for card detection
>> +wp-gpios: GPIOs for write protection
>> +ti,non-removable: non-removable slot (like eMMC)
>> +
>> +Example:
>> +       mmc1: mmc at 0x4809c000 {
>> +               compatible = "ti,omap4-hsmmc";
>> +               reg =<0x4809c000 0x400>;
>> +               ti,hwmods = "mmc1";
>> +               ti,dual-volt;
>> +               ti,bus-width =<4>;
>> +               vmmc-supply =<&vmmc>; /* phandle to regulator node */
>> +               ti,non-removable;
>> +       };