[PATCH 2/3 v4] arm: kirkwood: add dreamplug (fdt) support.

Jason jason at lakedaemon.net
Fri Feb 24 03:12:10 EST 2012


On Thu, Feb 23, 2012 at 07:34:33AM +0000, Arnd Bergmann wrote:
> On Thursday 23 February 2012, Rob Herring wrote:
> > On 02/22/2012 01:18 PM, Jason Cooper wrote:
> 
> > > diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> > > index 7fc603b..6095884 100644
> > > --- a/arch/arm/mach-kirkwood/Kconfig
> > > +++ b/arch/arm/mach-kirkwood/Kconfig
> > > @@ -44,6 +44,20 @@ config MACH_GURUPLUG
> > >  	  Say 'Y' here if you want your kernel to support the
> > >  	  Marvell GuruPlug Reference Board.
> > >  
> > > +config ARCH_KIRKWOOD_DT
> > > +	bool "Marvell Kirkwood Flattened Device Tree"
> > > +	select USE_OF
> > > +	help
> > > +	  Say 'Y' here if you want your kernel to support the
> > > +	  Marvell Kirkwood using flattened device tree.
> > > +
> > > +config MACH_DREAMPLUG_DT
> > > +	bool "Marvell DreamPlug (Flattened Device Tree)"
> > > +	depends on ARCH_KIRKWOOD_DT
> > > +	help
> > > +	  Say 'Y' here if you want your kernel to support the
> > > +	  Marvell DreamPlug (Flattened Device Tree).
> > 
> > Why do you need 2 entries?
> 
> The first one is used to build the board file for all DT based machines,
> the second one is used to select the dts file. I would be enough to have just
> the first one, but that makes it harder to find for people looking for
> dreamplug.
> 
> Maybe change the text to "Generic Marvell Kirkwood DT based (e.g. DreamPlug)"?

I was thinking about this more, and had, I hope, a better idea:  change
the 'depends on ARCH_KIRKWOOD_DT' to 'selects ARCH_KIRKWOOD_DT' and
remove the first entry.  This way, the logic remains the same and the
word 'Dreamplug' is always visible.  Any objections?

> > > +
> > > +static unsigned int dreamplug_mpp_config[] __initdata = {
> > > +	MPP0_SPI_SCn,
> > > +	MPP1_SPI_MOSI,
> > > +	MPP2_SPI_SCK,
> > > +	MPP3_SPI_MISO,
> > > +	MPP47_GPIO,	/* Bluetooth LED */
> > > +	MPP48_GPIO,	/* Wifi LED */
> > > +	MPP49_GPIO,	/* Wifi AP LED */
> > > +	0
> > > +};
> > 
> > Do you need this to boot? All this data should come from the dtb.
> 
> Putting this into the dtb would require converting kirkwood to use the
> pinctrl subsystem first, if we want to have proper bindings. When I
> did the hands-on review of the code with Jason during ELC, we decided
> to leave this being done the legacy way for now, which also matches
> how Tegra does it until we have the pinctrl bindings.
> 
> Also note how the patch description says "Driver porting will start
> with the uart (see next patch), and progress from there.  Possibly,
> spi/flash/partitions will be next." I think this is the best approach
> indeed and I'd probably leave the pinctrl stuff until the end.

Agreed.

> > > +
> > > +static void __init kirkwood_dt_init(void)
> > > +{
> > > +	kirkwood_init();
> > > +
> > > +	if (!of_machine_is_compatible("kirkwood,dreamplug"))
> > 
> > Huh? Your string doesn't match your dts file.
> > 
> > You've already matched against "marvell,dreamplug", so is this check
> > necessary?
> 
> It's wrong, and the condition is negated. It should be
> 
> 	if (of_machine_is_compatible("marvell,dreamplug"))
> 		dreamplug_init();
> 
> The idea is that there is one init function for all dt based
> kirkwood machines, which contains special setup functions for
> those boards that don't (yet) describe all the hardware in the
> dt.

Good catch, will fix in v5.

> > > +
> > > +static const char *kirkwood_dt_board_compat[] = {
> > > +	"marvell,dreamplug",
> > > +	NULL
> > > +};
> 
> Since you mention the name, it should probably be "globalscale,dreamplug"
> because the device is made by GlobalScale instead of Marvell.

hmm, Globalscale Tech is, as I understand it, a turn-key manufacturer.
They are simply building Marvell's development platforms for them,
handling sales, etc.  My impression was that Marvell designed the board
and contracted Globalscale to build and distribute it.

I don't care which we use, but is the convention to use the SoC designer
(marvell,dreamplug), the SoC (kirkwood,dreamplug), or the brand
(globalscale,dreamplug)?

If there is no set standard, I think the SoC is most accurate, as
nothing prevents a manufacturer from swapping out ICs/SoCs between
manufacturing runs of the same make/model.  Look at certain wifi USB
devices for examples.

thx,

Jason.


More information about the devicetree-discuss mailing list