[PATCH 1/4] spi/omap: Add DT support to McSPI driver

Cousson, Benoit b-cousson at ti.com
Thu Feb 16 08:10:37 EST 2012


On 2/15/2012 8:34 PM, Rob Herring wrote:
> On 02/15/2012 11:37 AM, Benoit Cousson wrote:
>> Add device tree support to the OMAP2+ McSPI driver.
>> Add the bindings documentation.
>>
>> Based on original code from Rajendra.
>>
>> Signed-off-by: Benoit Cousson<b-cousson at ti.com>
>> Cc: Grant Likely<grant.likely at secretlab.ca>
>> Cc: Rajendra Nayak<rnayak at ti.com>
>> ---
>>   Documentation/devicetree/bindings/spi/omap-spi.txt |   20 +++++++
>>   drivers/spi/spi-omap2-mcspi.c                      |   56 +++++++++++++++++---
>>   2 files changed, 68 insertions(+), 8 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
>>
>> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> new file mode 100644
>> index 0000000..81df374
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> @@ -0,0 +1,20 @@
>> +OMAP2+ McSPI device
>> +
>> +Required properties:
>> +- compatible :
>> +  - "ti,omap2-spi" for OMAP2&  OMAP3.
>> +  - "ti,omap4-spi" for OMAP4+.
>> +- ti,spi-num-cs : Number of chipselect supported  by the instance.
>> +- ti,hwmods: Name of the hwmod associated to the McSPI
>> +
>> +
>> +Example:
>> +
>> +mcspi1: mcspi at 1 {
>
> I don't recall if there's a generic name defined but just "spi" would
> probably be better.

I was wondering as well, but based on Grant further comment it looks it 
is the case.
I couldn't find any list of generic name in the bindings documentation. 
Is there some place we can get that?

> Also, shouldn't this be the base address?

Yeah, it should, I've just explained the reason of this OMAP 
irregularity in my answer to Grant. Let see if he'll be convinced or not :-)

> Otherwise, for the series:
>
> Acked-by: Rob Herring<rob.herring at calxeda.com>

Thanks,
Benoit

>
>
>> +    #address-cells =<1>;
>> +    #size-cells =<0>;
>> +    compatible = "ti,omap4-mcspi";
>> +    ti,hwmods = "mcspi1";
>> +    ti,spi-num-cs =<4>;
>> +};
>> +
>> diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
>> index 0b0dfb7..bb9274c 100644
>> --- a/drivers/spi/spi-omap2-mcspi.c
>> +++ b/drivers/spi/spi-omap2-mcspi.c
>> @@ -34,6 +34,8 @@
>>   #include<linux/io.h>
>>   #include<linux/slab.h>
>>   #include<linux/pm_runtime.h>
>> +#include<linux/of.h>
>> +#include<linux/of_device.h>
>>
>>   #include<linux/spi/spi.h>
>>
>> @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device *dev)
>>   	return 0;
>>   }
>>
>> +static struct omap2_mcspi_platform_config omap2_pdata = {
>> +	.regs_offset = 0,
>> +};
>> +
>> +static struct omap2_mcspi_platform_config omap4_pdata = {
>> +	.regs_offset = OMAP4_MCSPI_REG_OFFSET,
>> +};
>> +
>> +static const struct of_device_id omap_mcspi_of_match[] = {
>> +	{
>> +		.compatible = "ti,omap2-mcspi",
>> +		.data =&omap2_pdata,
>> +	},
>> +	{
>> +		.compatible = "ti,omap4-mcspi",
>> +		.data =&omap4_pdata,
>> +	},
>> +	{ },
>> +};
>> +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
>>
>>   static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   {
>>   	struct spi_master	*master;
>> -	struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
>> +	struct omap2_mcspi_platform_config *pdata;
>>   	struct omap2_mcspi	*mcspi;
>>   	struct resource		*r;
>>   	int			status = 0, i;
>>   	char			wq_name[20];
>> +	u32			regs_offset = 0;
>> +	static int		bus_num = 1;
>> +	struct device_node	*node = pdev->dev.of_node;
>> +	const struct of_device_id *match;
>>
>>   	master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
>>   	if (master == NULL) {
>> @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   	/* the spi->mode bits understood by this driver: */
>>   	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
>>
>> -	if (pdev->id != -1)
>> -		master->bus_num = pdev->id;
>> -
>>   	master->setup = omap2_mcspi_setup;
>>   	master->transfer = omap2_mcspi_transfer;
>>   	master->cleanup = omap2_mcspi_cleanup;
>> -	master->num_chipselect = pdata->num_cs;
>> +	master->dev.of_node = node;
>> +
>> +	match = of_match_device(omap_mcspi_of_match,&pdev->dev);
>> +	if (match) {
>> +		u32 num_cs = 1; /* default number of chipselect */
>> +		pdata = match->data;
>> +
>> +		of_property_read_u32(node, "ti,spi-num-cs",&num_cs);
>> +		master->num_chipselect = num_cs;
>> +		master->bus_num = bus_num++;
>> +	} else {
>> +		pdata = pdev->dev.platform_data;
>> +		master->num_chipselect = pdata->num_cs;
>> +		if (pdev->id != -1)
>> +			master->bus_num = pdev->id;
>> +	}
>> +	regs_offset = pdata->regs_offset;
>>
>>   	dev_set_drvdata(&pdev->dev, master);
>>
>> @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
>>   		goto free_master;
>>   	}
>>
>> -	r->start += pdata->regs_offset;
>> -	r->end += pdata->regs_offset;
>> +	r->start += regs_offset;
>> +	r->end += regs_offset;
>>   	mcspi->phys = r->start;
>>   	if (!request_mem_region(r->start, resource_size(r),
>>   				dev_name(&pdev->dev))) {
>> @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = {
>>   	.driver = {
>>   		.name =		"omap2_mcspi",
>>   		.owner =	THIS_MODULE,
>> -		.pm =		&omap2_mcspi_pm_ops
>> +		.pm =		&omap2_mcspi_pm_ops,
>> +		.of_match_table = omap_mcspi_of_match,
>>   	},
>>   	.remove =	__exit_p(omap2_mcspi_remove),
>>   };
>



More information about the devicetree-discuss mailing list