[PATCH v3 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
Benoit Cousson
b-cousson at ti.com
Wed Feb 15 04:56:10 EST 2012
Add a function to initialize the OMAP2/3 interrupt controller (INTC)
using a device tree node.
This version take advantage of the new irq_domain_add_legacy API.
Replace some printk() with the proper pr_ macro.
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Grant Likely <grant.likely at secretlab.ca>
---
.../devicetree/bindings/arm/omap/intc.txt | 27 +++++++++
arch/arm/mach-omap2/common.h | 10 +++
arch/arm/mach-omap2/irq.c | 59 ++++++++++++++++---
3 files changed, 86 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt
diff --git a/Documentation/devicetree/bindings/arm/omap/intc.txt b/Documentation/devicetree/bindings/arm/omap/intc.txt
new file mode 100644
index 0000000..f2583e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/intc.txt
@@ -0,0 +1,27 @@
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+ "ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 1.
+
+ The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+ intc: interrupt-controller at 1 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x48200000 0x1000>;
+ };
+
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index febffde..a87ce52 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -174,6 +174,16 @@ void omap3_intc_handle_irq(struct pt_regs *regs);
extern void __iomem *omap4_get_l2cache_base(void);
#endif
+struct device_node;
+#ifdef CONFIG_OF
+int __init intc_of_init(struct device_node *node, struct device_node *parent);
+#else
+int __init intc_of_init(struct device_node *node, struct device_node *parent)
+{
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SMP
extern void __iomem *omap4_get_scu_base(void);
#else
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 1fef061..e2d0f33 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -11,12 +11,16 @@
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
/* selected INTC register offsets */
@@ -57,6 +61,8 @@ static struct omap_irq_bank {
},
};
+static struct irq_domain *domain;
+
/* Structure to save interrupt controller context */
struct omap3_intc_regs {
u32 sysconfig;
@@ -147,17 +153,27 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-static void __init omap_init_irq(u32 base, int nr_irqs)
+static void __init omap_init_irq(u32 base, int nr_irqs,
+ struct device_node *node)
{
void __iomem *omap_irq_base;
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
- int i, j;
+ int i, j, irq_base;
omap_irq_base = ioremap(base, SZ_4K);
if (WARN_ON(!omap_irq_base))
return;
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (irq_base < 0) {
+ pr_warn("Couldn't allocate IRQ numbers\n");
+ irq_base = 0;
+ }
+
+ domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
@@ -166,36 +182,36 @@ static void __init omap_init_irq(u32 base, int nr_irqs)
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
- printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
+ pr_err("Could not ioremap irq bank%i\n", i);
continue;
}
omap_irq_bank_init_one(bank);
for (j = 0; j < bank->nr_irqs; j += 32)
- omap_alloc_gc(bank->base_reg + j, j, 32);
+ omap_alloc_gc(bank->base_reg + j, j + irq_base, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
}
- printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
- nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+ pr_info("Total of %ld interrupts on %d active controller%s\n",
+ nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
}
void __init omap2_init_irq(void)
{
- omap_init_irq(OMAP24XX_IC_BASE, 96);
+ omap_init_irq(OMAP24XX_IC_BASE, 96, NULL);
}
void __init omap3_init_irq(void)
{
- omap_init_irq(OMAP34XX_IC_BASE, 96);
+ omap_init_irq(OMAP34XX_IC_BASE, 96, NULL);
}
void __init ti81xx_init_irq(void)
{
- omap_init_irq(OMAP34XX_IC_BASE, 128);
+ omap_init_irq(OMAP34XX_IC_BASE, 128, NULL);
}
static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
@@ -225,8 +241,10 @@ out:
irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
irqnr &= ACTIVEIRQ_MASK;
- if (irqnr)
+ if (irqnr) {
+ irqnr = irq_find_mapping(domain, irqnr);
handle_IRQ(irqnr, regs);
+ }
} while (irqnr);
}
@@ -236,6 +254,27 @@ asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs
omap_intc_handle_irq(base_addr, regs);
}
+int __init intc_of_init(struct device_node *node, struct device_node *parent)
+{
+ struct resource res;
+ u32 nr_irqs = 96;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ if (of_address_to_resource(node, 0, &res)) {
+ WARN(1, "unable to get intc registers\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "ti,intc-size", &nr_irqs))
+ pr_warn("unable to get intc-size, default to %d\n", nr_irqs);
+
+ omap_init_irq(res.start, nr_irqs, of_node_get(node));
+
+ return 0;
+}
+
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
--
1.7.0.4
More information about the devicetree-discuss
mailing list