[PATCH 1/2] arm: tegra: Add new DT property to USB node.

[Venu Byravarasu]

As Tegra USB host driver is using instance number for resetting
PORT0 twice, adding a new DT property for handling this.

Signed-off-by: Venu Byravarasu <vbyravarasu at nvidia.com>
---
 .../bindings/usb/nvidia,tegra20-ehci.txt           |    2 ++
 arch/arm/boot/dts/tegra20.dtsi                     |    1 +
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index e9b005d..443a2b4 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -27,3 +27,5 @@ Optional properties:
     registers are accessed through the APB_MISC base address instead of
     the USB controller. Since this is a legacy issue it probably does not
     warrant a compatible string of its own.
+  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
+    USB ports, which need reset twice due to hardware issues.
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index b8effa1..3ebbd0c 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -364,6 +364,7 @@
 		phy_type = "utmi";
 		nvidia,has-legacy-mode;
 		status = "disabled";
+		nvidia,needs-double-reset;
 	};
 
 	usb at c5004000 {
-- 
1.7.0.4