pci and pcie device-tree binding - range No cells

[Rob Herring]

On 12/10/2012 09:05 AM, Michal Simek wrote:
> On 12/10/2012 03:26 PM, Rob Herring wrote:
>> On 12/10/2012 06:20 AM, Michal Simek wrote:
>>> Hi Grant and others,
>>>
>>> I have a question regarding number of cells in ranges property
>>> for pci and pcie nodes.
>>>
>>> Linux pci/pcie powerpc DTSes contain 7 cells (xpedite5370.dts,
>>> sequoia.dts, etc)
>>> but also 6 cells format too (mpc832x_mds.dts)
>>>
>>> Here is shown 6 cells ranges format and describe
>>> http://devicetree.org/Device_Tree_Usage#PCI_Host_Bridge
>>>
>>> And also in documentation in the linux
>>> Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
>>>
>>> Both format uses:
>>> #size-cells = <2>;
>>> #address-cells = <3>;
>>>
>>> What is valid format?
>>
>> Both. 7 cells are valid when the host (parent) bus is 64-bit and 6 cells
>> are valid when the host bus is 32-bit. The ranges property is <<child
>> address> <parent address> <size>>. The parent address #address-cells is
>> taken from the parent node.
> 
> Ok. Got it.
> 
> Here is what we use on zynq and microblaze - both 32bit which should be
> fine.
> 
>     ps7_axi_interconnect_0: axi at 0 {
>         #address-cells = <1>;
>         #size-cells = <1>;
>         axi_pcie_0: axi-pcie at 50000000 {
>             #address-cells = <3>;
>             #size-cells = <2>;
>             compatible = "xlnx,axi-pcie-1.05.a";
>             ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
>             ...
>         }
>     }
> 
> What I am wondering is pci_process_bridge_OF_ranges() at
> arch/powerpc/kernel/pci-common.c
> where there are used some hardcoded values which should be probably
> loaded from device-tree.
> 
> For example:
> 683         int np = pna + 5;
> ...
> 702                 pci_addr = of_read_number(ranges + 1, 2);
> 703                 cpu_addr = of_translate_address(dev, ranges + 3);
> 704                 size = of_read_number(ranges + pna + 3, 2);

These would always be correct whether you have 6 or 7 cells. pna is the
parent bus address cells size. The pci address is fixed at 3 cells.

> 
> 
> Unfortunately we have copied it to microblaze.

I look at the PCI DT code in powerpc and see a whole bunch of code that
seems like it should be common. The different per arch pci structs
complicates that. No one has really gotten to looking at PCI DT on ARM
yet except you and Thierry for Tegra. We definitely don't want to create
a 3rd copy. Starting the process of moving it to something like
drivers/pci/pci-of.c would be great.

Rob

> 
> Thanks,
> Michal
> 
> 
> 
> 
> 
>