[PATCH v2 2/5] netdev: mdio-octeon.c: Convert to use device tree.
David Daney
ddaney.cavm at gmail.com
Fri Apr 27 11:20:27 EST 2012
From: David Daney <david.daney at cavium.com>
Get the MDIO bus controller addresses from the device tree, small
clean up in use of devm_*
Remove, now unused, platform device setup code.
Acked-by: David S. Miller <davem at davemloft.net>
Signed-off-by: David Daney <david.daney at cavium.com>
Cc: netdev at vger.kernel.org
Cc: David S. Miller <davem at davemloft.net>
---
arch/mips/cavium-octeon/octeon-platform.c | 30 ---------
drivers/net/phy/mdio-octeon.c | 92 ++++++++++++++++++-----------
2 files changed, 58 insertions(+), 64 deletions(-)
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index f62a40f..66cabc2 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -168,36 +168,6 @@ out:
}
device_initcall(octeon_rng_device_init);
-/* Octeon SMI/MDIO interface. */
-static int __init octeon_mdiobus_device_init(void)
-{
- struct platform_device *pd;
- int ret = 0;
-
- if (octeon_is_simulation())
- return 0; /* No mdio in the simulator. */
-
- /* The bus number is the platform_device id. */
- pd = platform_device_alloc("mdio-octeon", 0);
- if (!pd) {
- ret = -ENOMEM;
- goto out;
- }
-
- ret = platform_device_add(pd);
- if (ret)
- goto fail;
-
- return ret;
-fail:
- platform_device_put(pd);
-
-out:
- return ret;
-
-}
-device_initcall(octeon_mdiobus_device_init);
-
/* Octeon mgmt port Ethernet interface. */
static int __init octeon_mgmt_device_init(void)
{
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index 826d961..d4015aa 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -3,14 +3,17 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2009 Cavium Networks
+ * Copyright (C) 2009,2011 Cavium, Inc.
*/
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/phy.h>
+#include <linux/io.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-smix-defs.h>
@@ -18,9 +21,17 @@
#define DRV_VERSION "1.0"
#define DRV_DESCRIPTION "Cavium Networks Octeon SMI/MDIO driver"
+#define SMI_CMD 0x0
+#define SMI_WR_DAT 0x8
+#define SMI_RD_DAT 0x10
+#define SMI_CLK 0x18
+#define SMI_EN 0x20
+
struct octeon_mdiobus {
struct mii_bus *mii_bus;
- int unit;
+ u64 register_base;
+ resource_size_t mdio_phys;
+ resource_size_t regsize;
int phy_irq[PHY_MAX_ADDR];
};
@@ -35,15 +46,15 @@ static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */
smi_cmd.s.phy_adr = phy_id;
smi_cmd.s.reg_adr = regnum;
- cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
do {
/*
* Wait 1000 clocks so we don't saturate the RSL bus
* doing reads.
*/
- cvmx_wait(1000);
- smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(p->unit));
+ __delay(1000);
+ smi_rd.u64 = cvmx_read_csr(p->register_base + SMI_RD_DAT);
} while (smi_rd.s.pending && --timeout);
if (smi_rd.s.val)
@@ -62,21 +73,21 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
smi_wr.u64 = 0;
smi_wr.s.dat = val;
- cvmx_write_csr(CVMX_SMIX_WR_DAT(p->unit), smi_wr.u64);
+ cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
smi_cmd.u64 = 0;
smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */
smi_cmd.s.phy_adr = phy_id;
smi_cmd.s.reg_adr = regnum;
- cvmx_write_csr(CVMX_SMIX_CMD(p->unit), smi_cmd.u64);
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
do {
/*
* Wait 1000 clocks so we don't saturate the RSL bus
* doing reads.
*/
- cvmx_wait(1000);
- smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(p->unit));
+ __delay(1000);
+ smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT);
} while (smi_wr.s.pending && --timeout);
if (timeout <= 0)
@@ -88,38 +99,44 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
static int __devinit octeon_mdiobus_probe(struct platform_device *pdev)
{
struct octeon_mdiobus *bus;
+ struct resource *res_mem;
union cvmx_smix_en smi_en;
- int i;
int err = -ENOENT;
bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
if (!bus)
return -ENOMEM;
- /* The platform_device id is our unit number. */
- bus->unit = pdev->id;
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res_mem == NULL) {
+ dev_err(&pdev->dev, "found no memory resource\n");
+ err = -ENXIO;
+ goto fail;
+ }
+ bus->mdio_phys = res_mem->start;
+ bus->regsize = resource_size(res_mem);
+ if (!devm_request_mem_region(&pdev->dev, bus->mdio_phys, bus->regsize,
+ res_mem->name)) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ goto fail;
+ }
+ bus->register_base =
+ (u64)devm_ioremap(&pdev->dev, bus->mdio_phys, bus->regsize);
bus->mii_bus = mdiobus_alloc();
if (!bus->mii_bus)
- goto err;
+ goto fail;
smi_en.u64 = 0;
smi_en.s.en = 1;
- cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
-
- /*
- * Standard Octeon evaluation boards don't support phy
- * interrupts, we need to poll.
- */
- for (i = 0; i < PHY_MAX_ADDR; i++)
- bus->phy_irq[i] = PHY_POLL;
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
bus->mii_bus->priv = bus;
bus->mii_bus->irq = bus->phy_irq;
bus->mii_bus->name = "mdio-octeon";
- snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
- bus->mii_bus->name, bus->unit);
+ snprintf(bus->mii_bus->id, MII_BUS_ID_SIZE, "%llx", bus->register_base);
bus->mii_bus->parent = &pdev->dev;
bus->mii_bus->read = octeon_mdiobus_read;
@@ -127,20 +144,18 @@ static int __devinit octeon_mdiobus_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, bus);
- err = mdiobus_register(bus->mii_bus);
+ err = of_mdiobus_register(bus->mii_bus, pdev->dev.of_node);
if (err)
- goto err_register;
+ goto fail_register;
dev_info(&pdev->dev, "Version " DRV_VERSION "\n");
return 0;
-err_register:
+fail_register:
mdiobus_free(bus->mii_bus);
-
-err:
- devm_kfree(&pdev->dev, bus);
+fail:
smi_en.u64 = 0;
- cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
return err;
}
@@ -154,14 +169,23 @@ static int __devexit octeon_mdiobus_remove(struct platform_device *pdev)
mdiobus_unregister(bus->mii_bus);
mdiobus_free(bus->mii_bus);
smi_en.u64 = 0;
- cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+ cvmx_write_csr(bus->register_base + SMI_EN, smi_en.u64);
return 0;
}
+static struct of_device_id octeon_mdiobus_match[] = {
+ {
+ .compatible = "cavium,octeon-3860-mdio",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, octeon_mdiobus_match);
+
static struct platform_driver octeon_mdiobus_driver = {
.driver = {
.name = "mdio-octeon",
.owner = THIS_MODULE,
+ .of_match_table = octeon_mdiobus_match,
},
.probe = octeon_mdiobus_probe,
.remove = __devexit_p(octeon_mdiobus_remove),
--
1.7.2.3
More information about the devicetree-discuss
mailing list