[PATCH] of: fix a few typos in the binding documentation

[Uwe Kleine-König]

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 Documentation/devicetree/bindings/mtd/atmel-nand.txt |    2 +-
 Documentation/devicetree/bindings/mtd/partition.txt  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index a200695..0c1bccd 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -3,7 +3,7 @@ Atmel NAND flash
 Required properties:
 - compatible : "atmel,at91rm9200-nand".
 - reg : should specify localbus address and size used for the chip,
-	and if availlable the ECC.
+	and if available the ECC.
 - atmel,nand-addr-offset : offset for the address latch.
 - atmel,nand-cmd-offset : offset for the command latch.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
index f114ce1..6e1f61f 100644
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/Documentation/devicetree/bindings/mtd/partition.txt
@@ -35,4 +35,4 @@ flash at 0 {
 	uimage at 100000 {
 		reg = <0x0100000 0x200000>;
 	};
-];
+};
-- 
1.7.10