[PATCH 3/5] dma: mxs-dma: add device tree probe support
Marek Vasut
marex at denx.de
Thu Apr 19 04:02:39 EST 2012
Dear Dong Aisheng,
> From: Dong Aisheng <dong.aisheng at linaro.org>
>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: Rob Herring <rob.herring at calxeda.com>
> Cc: Rob Landley <rob at landley.net>
> Cc: Vinod Koul <vinod.koul at intel.com>
> Cc: Dan Williams <dan.j.williams at intel.com>
> Cc: Shawn Guo <shawn.guo at linaro.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Marek Vasut <marek.vasut at gmail.com>
> Cc: Huang Shijie <b32955 at freescale.com>
> Signed-off-by: Dong Aisheng <dong.aisheng at linaro.org>
Reviewed-by: Marek Vasut <marex at denx.de>
> ---
> .../devicetree/bindings/dma/fsl-mxs-dma.txt | 19 +++++++++++++
> drivers/dma/mxs-dma.c | 29
> +++++++++++++++++--- 2 files changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode
> 100644
> index 0000000..ded0398
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
> @@ -0,0 +1,19 @@
> +* Freescale MXS DMA
> +
> +Required properties:
> +- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
> +- reg : Should contain registers location and length
> +
> +Supported chips:
> +imx23, imx28.
> +
> +Examples:
> +dma-apbh at 80004000 {
> + compatible = "fsl,imx28-dma-apbh";
> + reg = <0x80004000 2000>;
> +};
> +
> +dma-apbx at 80024000 {
> + compatible = "fsl,imx28-dma-apbx";
> + reg = <0x80024000 2000>;
> +};
> diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> index 51a29f9..74c3275 100644
> --- a/drivers/dma/mxs-dma.c
> +++ b/drivers/dma/mxs-dma.c
> @@ -22,8 +22,11 @@
> #include <linux/platform_device.h>
> #include <linux/dmaengine.h>
> #include <linux/delay.h>
> +#include <linux/module.h>
> #include <linux/fsl/mxs-dma.h>
> #include <linux/stmp_device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>
> #include <asm/irq.h>
>
> @@ -178,6 +181,17 @@ static struct platform_device_id mxs_dma_idt[] = {
> }
> };
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id mxs_dma_dt_ids[] = {
> + { .compatible = "fsl,imx23-dma-apbh", .data = &mxs_dma_idt[0], },
> + { .compatible = "fsl,imx23-dma-apbx", .data = &mxs_dma_idt[1], },
> + { .compatible = "fsl,imx28-dma-apbh", .data = &mxs_dma_idt[2], },
> + { .compatible = "fsl,imx28-dma-apbx", .data = &mxs_dma_idt[3], },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids);
> +#endif
> +
> static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan)
> {
> return container_of(chan, struct mxs_dma_chan, chan);
> @@ -671,10 +685,9 @@ err_out:
>
> static int __init mxs_dma_probe(struct platform_device *pdev)
> {
> - const struct platform_device_id *id_entry =
> - platform_get_device_id(pdev);
> - const struct mxs_dma_type *mtype =
> - (struct mxs_dma_type *)id_entry->driver_data;
> + const struct platform_device_id *id_entry;
> + const struct of_device_id *of_id;
> + const struct mxs_dma_type *mtype;
> struct mxs_dma_engine *mxs_dma;
> struct resource *iores;
> int ret, i;
> @@ -683,6 +696,13 @@ static int __init mxs_dma_probe(struct platform_device
> *pdev) if (!mxs_dma)
> return -ENOMEM;
>
> + of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev);
> + if (of_id)
> + id_entry = of_id->data;
> + else
> + id_entry = platform_get_device_id(pdev);
> +
> + mtype = (struct mxs_dma_type *)id_entry->driver_data;
> mxs_dma->type = mtype->type;
> mxs_dma->dev_id = mtype->id;
>
> @@ -770,6 +790,7 @@ err_request_region:
> static struct platform_driver mxs_dma_driver = {
> .driver = {
> .name = "mxs-dma",
> + .of_match_table = of_match_ptr(mxs_dma_dt_ids),
> },
> .id_table = mxs_dma_idt,
> };
Best regards,
Marek Vasut
More information about the devicetree-discuss
mailing list