[PATCH v3 2/2] i2c/of: Automatically populate i2c mux busses from device tree data.

[David Daney]

From: David Daney <david.daney at cavium.com>

For 'normal' i2c bus drivers, we can call of_i2c_register_devices()
and have the device tree framework automatically populate the bus with
the devices specified in the device tree.

This patch adds a common code to the i2c mux framework to have the mux
sub-busses be populated by the of_i2c_register_devices() too.  If the
mux device has an of_node, we populate the sub-bus' of_node so that
the subsequent call to of_i2c_register_devices() will find the
corresponding devices.

It seemed better to put this logic in i2c_add_mux_adapter() rather
than the individual mux drivers, as they will all probably want to do
the same thing.

Signed-off-by: David Daney <david.daney at cavium.com>
Cc: Lars-Peter Clausen <lars at metafoo.de>
---
 Documentation/devicetree/bindings/i2c/mux.txt |   60 +++++++++++++++++++++++++
 drivers/i2c/i2c-mux.c                         |   24 ++++++++++
 2 files changed, 84 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/mux.txt

diff --git a/Documentation/devicetree/bindings/i2c/mux.txt b/Documentation/devicetree/bindings/i2c/mux.txt
new file mode 100644
index 0000000..af84cce
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mux.txt
@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner.  The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+	/*
+	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
+	   with two NXP pca8574 GPIO expanders attached, one each to
+	   ports 3 and 4.
+	 */
+
+	mux at 70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c at 3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio1: gpio at 38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2c at 4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpio2: gpio at 38 {
+				compatible = "nxp,pca8574";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+	};
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 26ab31d..609794b 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -24,6 +24,8 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
 
 /* multiplexer per channel data */
 struct i2c_mux_priv {
@@ -125,6 +127,26 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	priv->adap.algo_data = priv;
 	priv->adap.dev.parent = &parent->dev;
 
+	/*
+	 * Try to get populate the mux adapter's of_node, expands to
+	 * nothing if !CONFIG_OF.
+	 */
+	if (mux_dev->of_node) {
+		struct device_node *child;
+		u32 reg;
+		int ret;
+
+		for_each_child_of_node(mux_dev->of_node, child) {
+			ret = of_property_read_u32(child, "reg", &reg);
+			if (ret)
+				continue;
+			if (chan_id == reg) {
+				priv->adap.dev.of_node = child;
+				break;
+			}
+		}
+	}
+
 	if (force_nr) {
 		priv->adap.nr = force_nr;
 		ret = i2c_add_numbered_adapter(&priv->adap);
@@ -142,6 +164,8 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
 		 i2c_adapter_id(&priv->adap));
 
+	of_i2c_register_devices(&priv->adap);
+
 	return &priv->adap;
 }
 EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
-- 
1.7.2.3