[PATCH V3 1/4] SPEAr: Remove existing padmux support for SPEAr
Viresh Kumar
viresh.kumar at st.com
Thu Apr 12 15:24:34 EST 2012
We must use pinctrl framework instead of defining per SoC pinmux drivers. This
patch removes existing padmux support present for SPEAr platform.
Signed-off-by: Viresh Kumar <viresh.kumar at st.com>
---
arch/arm/mach-spear3xx/include/mach/generic.h | 128 --------
arch/arm/mach-spear3xx/spear300.c | 389 +----------------------
arch/arm/mach-spear3xx/spear310.c | 161 +----------
arch/arm/mach-spear3xx/spear320.c | 403 +-----------------------
arch/arm/mach-spear3xx/spear3xx.c | 425 -------------------------
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/padmux.h | 92 ------
arch/arm/plat-spear/padmux.c | 164 ----------
8 files changed, 4 insertions(+), 1760 deletions(-)
delete mode 100644 arch/arm/plat-spear/include/plat/padmux.h
delete mode 100644 arch/arm/plat-spear/padmux.c
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index a756958..9603bf4 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -20,7 +20,6 @@
#include <linux/amba/bus.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <plat/padmux.h>
/* spear3xx declarations */
/*
@@ -43,147 +42,20 @@ void __init spear3xx_dt_init_irq(void);
void spear_restart(char, const char *);
-/* pad mux declarations */
-#define PMX_FIRDA_MASK (1 << 14)
-#define PMX_I2C_MASK (1 << 13)
-#define PMX_SSP_CS_MASK (1 << 12)
-#define PMX_SSP_MASK (1 << 11)
-#define PMX_MII_MASK (1 << 10)
-#define PMX_GPIO_PIN0_MASK (1 << 9)
-#define PMX_GPIO_PIN1_MASK (1 << 8)
-#define PMX_GPIO_PIN2_MASK (1 << 7)
-#define PMX_GPIO_PIN3_MASK (1 << 6)
-#define PMX_GPIO_PIN4_MASK (1 << 5)
-#define PMX_GPIO_PIN5_MASK (1 << 4)
-#define PMX_UART0_MODEM_MASK (1 << 3)
-#define PMX_UART0_MASK (1 << 2)
-#define PMX_TIMER_3_4_MASK (1 << 1)
-#define PMX_TIMER_1_2_MASK (1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
/* spear300 declarations */
#ifdef CONFIG_MACH_SPEAR300
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine declarations here */
void __init spear300_clk_init(void);
#endif /* CONFIG_MACH_SPEAR300 */
/* spear310 declarations */
#ifdef CONFIG_MACH_SPEAR310
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine declarations here */
void __init spear310_clk_init(void);
#endif /* CONFIG_MACH_SPEAR310 */
/* spear320 declarations */
#ifdef CONFIG_MACH_SPEAR320
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine declarations here */
void __init spear320_clk_init(void);
#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f46fc26..2db0bd1 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -21,357 +21,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x00
-#define MODE_CONFIG_REG 0x04
-
-/* modes */
-#define NAND_MODE (1 << 0)
-#define NOR_MODE (1 << 1)
-#define PHOTO_FRAME_MODE (1 << 2)
-#define LEND_IP_PHONE_MODE (1 << 3)
-#define HEND_IP_PHONE_MODE (1 << 4)
-#define LEND_WIFI_PHONE_MODE (1 << 5)
-#define HEND_WIFI_PHONE_MODE (1 << 6)
-#define ATA_PABX_WI2S_MODE (1 << 7)
-#define ATA_PABX_I2S_MODE (1 << 8)
-#define CAML_LCDW_MODE (1 << 9)
-#define CAMU_LCD_MODE (1 << 10)
-#define CAMU_WLCD_MODE (1 << 11)
-#define CAML_LCD_MODE (1 << 12)
-#define ALL_MODES 0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
- .id = NAND_MODE,
- .name = "nand mode",
- .mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
- .id = NOR_MODE,
- .name = "nor mode",
- .mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
- .id = PHOTO_FRAME_MODE,
- .name = "photo frame mode",
- .mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
- .id = LEND_IP_PHONE_MODE,
- .name = "lend ip phone mode",
- .mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
- .id = HEND_IP_PHONE_MODE,
- .name = "hend ip phone mode",
- .mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
- .id = LEND_WIFI_PHONE_MODE,
- .name = "lend wifi phone mode",
- .mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
- .id = HEND_WIFI_PHONE_MODE,
- .name = "hend wifi phone mode",
- .mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
- .id = ATA_PABX_WI2S_MODE,
- .name = "ata pabx wi2s mode",
- .mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
- .id = ATA_PABX_I2S_MODE,
- .name = "ata pabx i2s mode",
- .mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
- .id = CAML_LCDW_MODE,
- .name = "caml lcdw mode",
- .mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
- .id = CAMU_LCD_MODE,
- .name = "camu lcd mode",
- .mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
- .id = CAMU_WLCD_MODE,
- .name = "camu wlcd mode",
- .mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
- .id = CAML_LCD_MODE,
- .name = "caml lcd mode",
- .mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
- ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
- .name = "fsmc_2_chips",
- .modes = pmx_fsmc_2_chips_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
- ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
- .mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
- .name = "fsmc_4_chips",
- .modes = pmx_fsmc_4_chips_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
- LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
- CAML_LCD_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
- .name = "keyboard",
- .modes = pmx_keyboard_modes,
- .mode_count = ARRAY_SIZE(pmx_keyboard_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
- }, {
- .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- CAMU_LCD_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_clcd = {
- .name = "clcd",
- .modes = pmx_clcd_modes,
- .mode_count = ARRAY_SIZE(pmx_clcd_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
- .mask = PMX_MII_MASK,
- }, {
- .ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- }, {
- .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
- }, {
- .ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
- }, {
- .ids = ATA_PABX_WI2S_MODE,
- .mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
- | PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
- .name = "telecom_gpio",
- .modes = pmx_telecom_gpio_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
- | HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
- | ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
- .name = "telecom_tdm",
- .modes = pmx_telecom_tdm_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
- LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
- | ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
- CAML_LCDW_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
- .name = "telecom_spi_cs_i2c_clk",
- .modes = pmx_telecom_spi_cs_i2c_clk_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
- {
- .ids = CAML_LCDW_MODE | CAML_LCD_MODE,
- .mask = PMX_MII_MASK,
- }, {
- .ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
- .name = "telecom_camera",
- .modes = pmx_telecom_camera_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
- {
- .ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
- .name = "telecom_dac",
- .modes = pmx_telecom_dac_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
- {
- .ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
- | LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
- ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
- | CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
- .name = "telecom_i2s",
- .modes = pmx_telecom_i2s_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
- {
- .ids = NAND_MODE | NOR_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
- PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
- .name = "telecom_boot_pins",
- .modes = pmx_telecom_boot_pins_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
- HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
- CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
- ATA_PABX_I2S_MODE,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
- PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
- .name = "telecom_sdhci_4bit",
- .modes = pmx_telecom_sdhci_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
- HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
- HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
- CAMU_WLCD_MODE | CAML_LCD_MODE,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
- PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
- .name = "telecom_sdhci_8bit",
- .modes = pmx_telecom_sdhci_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
- {
- .ids = PHOTO_FRAME_MODE,
- .mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
- PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
- .name = "arm gpio1",
- .modes = pmx_gpio1_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio1_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -425,22 +74,6 @@ static struct spear_shirq shirq_ras1 = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear300_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp_cs,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear300 specific devices */
- &spear300_pmx_fsmc_2_chips,
- &spear300_pmx_clcd,
- &spear300_pmx_telecom_sdhci_4bit,
- &spear300_pmx_gpio1,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear300_dma_info[] = {
{
@@ -639,7 +272,7 @@ static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
static void __init spear300_dt_init(void)
{
- int ret = -EINVAL;
+ int ret;
pl080_plat_data.slave_channels = spear300_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
@@ -654,26 +287,6 @@ static void __init spear300_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ\n");
}
-
- if (of_machine_is_compatible("st,spear300-evb")) {
- /* pmx initialization */
- pmx_driver.mode = &spear300_photo_frame_mode;
- pmx_driver.devs = spear300_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
-
- pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
- if (pmx_driver.base) {
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- /* Free Mapping, device selection already done */
- iounmap(pmx_driver.base);
- }
-
- if (ret)
- pr_err("Initialization Failed");
- }
}
static const char * const spear300_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 063e7da..aec07c9 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -22,128 +22,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
- .name = "emi_cs_0_1_4_5",
- .modes = pmx_emi_cs_0_1_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
- .name = "emi_cs_2_3",
- .modes = pmx_emi_cs_2_3_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
- .name = "uart1",
- .modes = pmx_uart1_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
- .name = "uart2",
- .modes = pmx_uart2_modes,
- .mode_count = ARRAY_SIZE(pmx_uart2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
- .name = "uart3_4_5",
- .modes = pmx_uart3_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
- .name = "fsmc",
- .modes = pmx_fsmc_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
- .name = "rs485_0_1",
- .modes = pmx_rs485_0_1_modes,
- .mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
- .name = "tdm0",
- .modes = pmx_tdm0_modes,
- .mode_count = ARRAY_SIZE(pmx_tdm0_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -260,30 +138,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear310_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_gpio_pin0,
- &spear3xx_pmx_gpio_pin1,
- &spear3xx_pmx_gpio_pin2,
- &spear3xx_pmx_gpio_pin3,
- &spear3xx_pmx_gpio_pin4,
- &spear3xx_pmx_gpio_pin5,
- &spear3xx_pmx_uart0,
-
- /* spear310 specific devices */
- &spear310_pmx_emi_cs_0_1_4_5,
- &spear310_pmx_emi_cs_2_3,
- &spear310_pmx_uart1,
- &spear310_pmx_uart2,
- &spear310_pmx_uart3_4_5,
- &spear310_pmx_fsmc,
- &spear310_pmx_rs485_0_1,
- &spear310_pmx_tdm0,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
@@ -518,7 +372,7 @@ static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
static void __init spear310_dt_init(void)
{
void __iomem *base;
- int ret = 0;
+ int ret;
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
@@ -553,19 +407,6 @@ static void __init spear310_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
-
- if (of_machine_is_compatible("st,spear310-evb")) {
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = NULL;
- pmx_driver.devs = spear310_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
-
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- }
}
static const char * const spear310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 1e74031..4812c69 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -23,373 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG 0x0C
-#define MODE_CONFIG_REG 0x10
-
-/* modes */
-#define AUTO_NET_SMII_MODE (1 << 0)
-#define AUTO_NET_MII_MODE (1 << 1)
-#define AUTO_EXP_MODE (1 << 2)
-#define SMALL_PRINTERS_MODE (1 << 3)
-#define ALL_MODES 0xF
-
-struct pmx_mode spear320_auto_net_smii_mode = {
- .id = AUTO_NET_SMII_MODE,
- .name = "Automation Networking SMII Mode",
- .mask = 0x00,
-};
-
-struct pmx_mode spear320_auto_net_mii_mode = {
- .id = AUTO_NET_MII_MODE,
- .name = "Automation Networking MII Mode",
- .mask = 0x01,
-};
-
-struct pmx_mode spear320_auto_exp_mode = {
- .id = AUTO_EXP_MODE,
- .name = "Automation Expanded Mode",
- .mask = 0x02,
-};
-
-struct pmx_mode spear320_small_printers_mode = {
- .id = SMALL_PRINTERS_MODE,
- .name = "Small Printers Mode",
- .mask = 0x03,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_clcd_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_clcd = {
- .name = "clcd",
- .modes = pmx_clcd_modes,
- .mode_count = ARRAY_SIZE(pmx_clcd_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_emi = {
- .name = "emi",
- .modes = pmx_emi_modes,
- .mode_count = ARRAY_SIZE(pmx_emi_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_fsmc = {
- .name = "fsmc",
- .modes = pmx_fsmc_modes,
- .mode_count = ARRAY_SIZE(pmx_fsmc_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_spp_modes[] = {
- {
- .ids = SMALL_PRINTERS_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_spp = {
- .name = "spp",
- .modes = pmx_spp_modes,
- .mode_count = ARRAY_SIZE(pmx_spp_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
- SMALL_PRINTERS_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_sdhci = {
- .name = "sdhci",
- .modes = pmx_sdhci_modes,
- .mode_count = ARRAY_SIZE(pmx_sdhci_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2s_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_i2s = {
- .name = "i2s",
- .modes = pmx_i2s_modes,
- .mode_count = ARRAY_SIZE(pmx_i2s_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart1 = {
- .name = "uart1",
- .modes = pmx_uart1_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
- PMX_SSP_CS_MASK,
- }, {
- .ids = SMALL_PRINTERS_MODE,
- .mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
- PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart1_modem = {
- .name = "uart1_modem",
- .modes = pmx_uart1_modem_modes,
- .mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
- {
- .ids = ALL_MODES,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_uart2 = {
- .name = "uart2",
- .modes = pmx_uart2_modes,
- .mode_count = ARRAY_SIZE(pmx_uart2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_touchscreen_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_touchscreen = {
- .name = "touchscreen",
- .modes = pmx_touchscreen_modes,
- .mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_can_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
- .mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
- PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_can = {
- .name = "can",
- .modes = pmx_can_modes,
- .mode_count = ARRAY_SIZE(pmx_can_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_sdhci_led = {
- .name = "sdhci_led",
- .modes = pmx_sdhci_led_modes,
- .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm0_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm0 = {
- .name = "pwm0",
- .modes = pmx_pwm0_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm0_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm1_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_UART0_MODEM_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm1 = {
- .name = "pwm1",
- .modes = pmx_pwm1_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm2_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
- .mask = PMX_SSP_CS_MASK,
- }, {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm2 = {
- .name = "pwm2",
- .modes = pmx_pwm2_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm3_modes[] = {
- {
- .ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_pwm3 = {
- .name = "pwm3",
- .modes = pmx_pwm3_modes,
- .mode_count = ARRAY_SIZE(pmx_pwm3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp1_modes[] = {
- {
- .ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_ssp1 = {
- .name = "ssp1",
- .modes = pmx_ssp1_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp2_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_ssp2 = {
- .name = "ssp2",
- .modes = pmx_ssp2_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp2_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_mii1_modes[] = {
- {
- .ids = AUTO_NET_MII_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_mii1 = {
- .name = "mii1",
- .modes = pmx_mii1_modes,
- .mode_count = ARRAY_SIZE(pmx_mii1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii0_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_smii0 = {
- .name = "smii0",
- .modes = pmx_smii0_modes,
- .mode_count = ARRAY_SIZE(pmx_smii0_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii1_modes[] = {
- {
- .ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear320_pmx_smii1 = {
- .name = "smii1",
- .modes = pmx_smii1_modes,
- .mode_count = ARRAY_SIZE(pmx_smii1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2c1_modes[] = {
- {
- .ids = AUTO_EXP_MODE,
- .mask = 0x0,
- },
-};
-
-struct pmx_dev spear320_pmx_i2c1 = {
- .name = "i2c1",
- .modes = pmx_i2c1_modes,
- .mode_count = ARRAY_SIZE(pmx_i2c1_modes),
- .enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
- .mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
- .mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
/* spear3xx shared irq */
static struct shirq_dev_config shirq_ras1_config[] = {
{
@@ -514,27 +147,6 @@ static struct spear_shirq shirq_intrcomm_ras = {
},
};
-/* padmux devices to enable */
-static struct pmx_dev *spear320_evb_pmx_devs[] = {
- /* spear3xx specific devices */
- &spear3xx_pmx_i2c,
- &spear3xx_pmx_ssp,
- &spear3xx_pmx_mii,
- &spear3xx_pmx_uart0,
-
- /* spear320 specific devices */
- &spear320_pmx_fsmc,
- &spear320_pmx_sdhci,
- &spear320_pmx_i2s,
- &spear320_pmx_uart1,
- &spear320_pmx_uart2,
- &spear320_pmx_can,
- &spear320_pmx_pwm0,
- &spear320_pmx_pwm1,
- &spear320_pmx_pwm2,
- &spear320_pmx_mii1,
-};
-
/* DMAC platform data's slave info */
struct pl08x_channel_data spear320_dma_info[] = {
{
@@ -772,7 +384,7 @@ static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
static void __init spear320_dt_init(void)
{
void __iomem *base;
- int ret = 0;
+ int ret;
pl080_plat_data.slave_channels = spear320_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
@@ -801,19 +413,6 @@ static void __init spear320_dt_init(void)
if (ret)
pr_err("Error registering Shared IRQ 4\n");
}
-
- if (of_machine_is_compatible("st,spear320-evb")) {
- /* pmx initialization */
- pmx_driver.base = base;
- pmx_driver.mode = &spear320_auto_net_mii_mode;
- pmx_driver.devs = spear320_evb_pmx_devs;
- pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
-
- ret = pmx_register(&pmx_driver);
- if (ret)
- pr_err("padmux: registration failed. err no: %d\n",
- ret);
- }
}
static const char * const spear320_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 17d4ac9..12bf879 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -23,431 +23,6 @@
#include <mach/generic.h>
#include <mach/hardware.h>
-/* pad multiplexing support */
-/* devices */
-static struct pmx_dev_mode pmx_firda_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_firda = {
- .name = "firda",
- .modes = pmx_firda_modes,
- .mode_count = ARRAY_SIZE(pmx_firda_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_i2c_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_I2C_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_i2c = {
- .name = "i2c",
- .modes = pmx_i2c_modes,
- .mode_count = ARRAY_SIZE(pmx_i2c_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_ssp_cs = {
- .name = "ssp_chip_selects",
- .modes = pmx_ssp_cs_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_SSP_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_ssp = {
- .name = "ssp",
- .modes = pmx_ssp_modes,
- .mode_count = ARRAY_SIZE(pmx_ssp_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_mii_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_mii = {
- .name = "mii",
- .modes = pmx_mii_modes,
- .mode_count = ARRAY_SIZE(pmx_mii_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin0 = {
- .name = "gpio_pin0",
- .modes = pmx_gpio_pin0_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin1 = {
- .name = "gpio_pin1",
- .modes = pmx_gpio_pin1_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin2 = {
- .name = "gpio_pin2",
- .modes = pmx_gpio_pin2_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN3_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin3 = {
- .name = "gpio_pin3",
- .modes = pmx_gpio_pin3_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin4 = {
- .name = "gpio_pin4",
- .modes = pmx_gpio_pin4_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin5 = {
- .name = "gpio_pin5",
- .modes = pmx_gpio_pin5_modes,
- .mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_uart0_modem = {
- .name = "uart0_modem",
- .modes = pmx_uart0_modem_modes,
- .mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_uart0 = {
- .name = "uart0",
- .modes = pmx_uart0_modes,
- .mode_count = ARRAY_SIZE(pmx_uart0_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_timer_3_4 = {
- .name = "timer_3_4",
- .modes = pmx_timer_3_4_modes,
- .mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
- .enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
- {
- .ids = 0xffffffff,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_timer_1_2 = {
- .name = "timer_1_2",
- .modes = pmx_timer_1_2_modes,
- .mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
- .enb_on_reset = 0,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* plgpios devices */
-static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_FIRDA_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
- .name = "plgpio 0 and 1",
- .modes = pmx_plgpio_0_1_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
- .name = "plgpio 2 and 3",
- .modes = pmx_plgpio_2_3_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_I2C_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
- .name = "plgpio 4 and 5",
- .modes = pmx_plgpio_4_5_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
- .name = "plgpio 6 to 9",
- .modes = pmx_plgpio_6_9_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_MII_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
- .name = "plgpio 10 to 27",
- .modes = pmx_plgpio_10_27_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN0_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_28 = {
- .name = "plgpio 28",
- .modes = pmx_plgpio_28_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN1_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_29 = {
- .name = "plgpio 29",
- .modes = pmx_plgpio_29_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_30 = {
- .name = "plgpio 30",
- .modes = pmx_plgpio_30_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN3_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_31 = {
- .name = "plgpio 31",
- .modes = pmx_plgpio_31_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_32 = {
- .name = "plgpio 32",
- .modes = pmx_plgpio_32_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_GPIO_PIN5_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_33 = {
- .name = "plgpio 33",
- .modes = pmx_plgpio_33_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_SSP_CS_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
- .name = "plgpio 34 to 36",
- .modes = pmx_plgpio_34_36_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_UART0_MODEM_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
- .name = "plgpio 37 to 42",
- .modes = pmx_plgpio_37_42_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_1_2_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
- .name = "plgpio 43, 44, 47 and 48",
- .modes = pmx_plgpio_43_44_47_48_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
- .enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
- {
- .ids = 0x00,
- .mask = PMX_TIMER_3_4_MASK,
- },
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
- .name = "plgpio 45, 46, 49 and 50",
- .modes = pmx_plgpio_45_46_49_50_modes,
- .mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
- .enb_on_reset = 1,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
.bus_id = 0,
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index 4af6258..7744802 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -5,4 +5,4 @@
# Common support
obj-y := clock.o restart.o time.o pl080.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
diff --git a/arch/arm/plat-spear/include/plat/padmux.h b/arch/arm/plat-spear/include/plat/padmux.h
deleted file mode 100644
index 877f3ad..0000000
--- a/arch/arm/plat-spear/include/plat/padmux.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
- u32 offset;
- u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
- u32 ids;
- u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
- char *name;
- u32 id;
- u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
- char *name;
- struct pmx_dev_mode *modes;
- u8 mode_count;
- bool is_active;
- bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
- struct pmx_mode *mode;
- struct pmx_dev **devs;
- u8 devs_count;
- u32 *base;
- struct pmx_reg mode_reg;
- struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
deleted file mode 100644
index 555eec6..0000000
--- a/arch/arm/plat-spear/padmux.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar at st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
- u32 base;
- struct pmx_reg mode_reg;
- struct pmx_reg mux_reg;
- struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
- u32 val;
-
- if (!mode->name)
- return -EFAULT;
-
- pmx->active_mode = mode;
-
- val = readl(pmx->base + pmx->mode_reg.offset);
- val &= ~pmx->mode_reg.mask;
- val |= mode->mask & pmx->mode_reg.mask;
- writel(val, pmx->base + pmx->mode_reg.offset);
-
- return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
- u32 val, i, mask;
-
- if (!count)
- return -EINVAL;
-
- val = readl(pmx->base + pmx->mux_reg.offset);
- for (i = 0; i < count; i++) {
- u8 j = 0;
-
- if (!devs[i]->name || !devs[i]->modes) {
- printk(KERN_ERR "padmux: dev name or modes is null\n");
- continue;
- }
- /* check if peripheral exists in active mode */
- if (pmx->active_mode) {
- bool found = false;
- for (j = 0; j < devs[i]->mode_count; j++) {
- if (devs[i]->modes[j].ids &
- pmx->active_mode->id) {
- found = true;
- break;
- }
- }
- if (found == false) {
- printk(KERN_ERR "%s device not available in %s"\
- "mode\n", devs[i]->name,
- pmx->active_mode->name);
- continue;
- }
- }
-
- /* enable peripheral */
- mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
- if (devs[i]->enb_on_reset)
- val &= ~mask;
- else
- val |= mask;
-
- devs[i]->is_active = true;
- }
- writel(val, pmx->base + pmx->mux_reg.offset);
- kfree(pmx);
-
- /* this will ensure that multiplexing can't be changed now */
- pmx = (struct pmx *)-1;
-
- return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
- int ret = 0;
-
- if (pmx)
- return -EPERM;
- if (!driver->base || !driver->devs)
- return -EFAULT;
-
- pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
- if (!pmx)
- return -ENOMEM;
-
- pmx->base = (u32)driver->base;
- pmx->mode_reg.offset = driver->mode_reg.offset;
- pmx->mode_reg.mask = driver->mode_reg.mask;
- pmx->mux_reg.offset = driver->mux_reg.offset;
- pmx->mux_reg.mask = driver->mux_reg.mask;
-
- /* choose mode to enable */
- if (driver->mode) {
- ret = pmx_mode_set(driver->mode);
- if (ret)
- goto pmx_fail;
- }
- ret = pmx_devs_enable(driver->devs, driver->devs_count);
- if (ret)
- goto pmx_fail;
-
- return 0;
-
-pmx_fail:
- return ret;
-}
--
1.7.9
More information about the devicetree-discuss
mailing list