[PATCH V3 1/5] ARM: kirkwood: Basic support for DNS-320 and DNS-325
Jason Cooper
jason at lakedaemon.net
Wed Apr 11 10:35:34 EST 2012
On Fri, Apr 06, 2012 at 04:49:55PM -0700, Grant Likely wrote:
> On Tue, 27 Mar 2012 22:54:11 +0100, Jamie Lentin <jm at lentin.co.uk> wrote:
> > Add support for the DNS-320 and DNS-325. Describe as much as currently possible
> > in the devicetree files, create a board-dnskw.c for everything else.
> >
> > Use IEEE-compliant "okay", rather than "ok"
> >
> > Acked-by: Arnd Bergmann <arnd at arndb.de>
> > Acked-by: Jason Cooper <jason at lakedaemon.net>
> > Signed-off-by: Jamie Lentin <jm at lentin.co.uk>
> > ---
> > arch/arm/boot/dts/kirkwood-dns320.dts | 29 +++
> > arch/arm/boot/dts/kirkwood-dns325.dts | 24 +++
> > arch/arm/mach-kirkwood/Kconfig | 23 +++
> > arch/arm/mach-kirkwood/Makefile | 1 +
> > arch/arm/mach-kirkwood/Makefile.boot | 2 +
> > arch/arm/mach-kirkwood/board-dnskw.c | 306 +++++++++++++++++++++++++++++++++
> > arch/arm/mach-kirkwood/board-dt.c | 5 +
> > arch/arm/mach-kirkwood/common.h | 6 +
> > 8 files changed, 396 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/boot/dts/kirkwood-dns320.dts
> > create mode 100644 arch/arm/boot/dts/kirkwood-dns325.dts
> > create mode 100644 arch/arm/mach-kirkwood/board-dnskw.c
> >
> > diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
> > new file mode 100644
> > index 0000000..78c834f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/kirkwood-dns320.dts
> > @@ -0,0 +1,29 @@
> > +/dts-v1/;
> > +
> > +/include/ "kirkwood.dtsi"
> > +
> > +/ {
> > + model = "D-Link DNS-320 NAS (Rev A1)";
> > + compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <0x00000000 0x8000000>;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200n8 earlyprintk";
> > + };
> > +
> > + ocp at f1000000 {
> > + serial at 12000 {
> > + clock-frequency = <166666667>;
> > + status = "okay";
> > + };
> > +
> > + serial at 12100 {
> > + clock-frequency = <166666667>;
> > + status = "okay";
> > + };
> > + };
> > +};
> > diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
> > new file mode 100644
> > index 0000000..23241ab
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/kirkwood-dns325.dts
> > @@ -0,0 +1,24 @@
> > +/dts-v1/;
> > +
> > +/include/ "kirkwood.dtsi"
> > +
> > +/ {
> > + model = "D-Link DNS-325 NAS (Rev A1)";
> > + compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <0x00000000 0x10000000>;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200n8 earlyprintk";
> > + };
> > +
> > + ocp at f1000000 {
> > + serial at 12000 {
> > + clock-frequency = <200000000>;
> > + status = "okay";
> > + };
> > + };
> > +};
> > diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> > index 90ceab7..d594b6e 100644
> > --- a/arch/arm/mach-kirkwood/Kconfig
> > +++ b/arch/arm/mach-kirkwood/Kconfig
> > @@ -58,6 +58,29 @@ config MACH_DREAMPLUG_DT
> > Say 'Y' here if you want your kernel to support the
> > Marvell DreamPlug (Flattened Device Tree).
> >
> > +config MACH_DNSKW_DT
> > + bool
> > +
> > +config MACH_DNS320_DT
> > + bool "D-Link DNS-320 (Flattened Device Tree)"
> > + select ARCH_KIRKWOOD_DT
> > + select MACH_DNSKW_DT
> > + select CONFIG_MTD_OF_PARTS
> > + select CONFIG_SERIAL_OF_PLATFORM
>
> These two lines are dangerous. It is not safe to 'select' Kconfig
> symbols that have 'depends' constraints. Otherwise, the symbol will
> get forced on without it's dependencies.
>
> Typically other code handles this by creating blank "HAVE_*" symbols
> that the needed symbol can do something like "default y if HAVE_*"
I'm in favor of just omitting these two lines. I think it's a bad habit
to presume what features a user may want. This should be handled by
*_defconfig, if anywhere.
> > + help
> > + Say 'Y' here if you want your kernel to support the
> > + D-Link DNS-320 NAS, using Flattened Device Tree.
> > +
> > +config MACH_DNS325_DT
> > + bool "D-Link DNS-325 (Flattened Device Tree)"
> > + select ARCH_KIRKWOOD_DT
> > + select MACH_DNSKW_DT
> > + select CONFIG_MTD_OF_PARTS
> > + select CONFIG_SERIAL_OF_PLATFORM
> > + help
> > + Say 'Y' here if you want your kernel to support the
> > + D-Link DNS-325 NAS, using Flattened Device Tree.
> > +
>
> The *only* difference between these two configs is the .dtb file that
> gets built. Don't create a separate Kconfig entry for each dnskw
> board. Just build all the dnskw dtb files when MACH_DNSKW_DT is
> selected. Building .dtb files is cheap.
Ack.
> > config MACH_TS219
> > bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
> > help
> > diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
> > index e299a95..b092af5 100644
> > --- a/arch/arm/mach-kirkwood/Makefile
> > +++ b/arch/arm/mach-kirkwood/Makefile
> > @@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
> > obj-$(CONFIG_CPU_IDLE) += cpuidle.o
> > obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
> > obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
> > +obj-$(CONFIG_MACH_DNSKW_DT) += board-dnskw.o
> > diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
> > index 16f9385..9c5e45f 100644
> > --- a/arch/arm/mach-kirkwood/Makefile.boot
> > +++ b/arch/arm/mach-kirkwood/Makefile.boot
> > @@ -3,3 +3,5 @@ params_phys-y := 0x00000100
> > initrd_phys-y := 0x00800000
> >
> > dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
> > +dtb-$(CONFIG_MACH_DNS320_DT) += kirkwood-dns320.dtb
> > +dtb-$(CONFIG_MACH_DNS325_DT) += kirkwood-dns325.dtb
> > diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
> > new file mode 100644
> > index 0000000..7cb7f6a
> > --- /dev/null
> > +++ b/arch/arm/mach-kirkwood/board-dnskw.c
> > @@ -0,0 +1,306 @@
> > +/*
> > + * Copyright 2012 (C), Jamie Lentin <jm at lentin.co.uk>
> > + *
> > + * arch/arm/mach-kirkwood/board-dnskw.c
> > + *
> > + * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
> > + * flattened device tree yet.
> > + *
> > + * This file is licensed under the terms of the GNU General Public
> > + * License version 2. This program is licensed "as is" without any
> > + * warranty of any kind, whether express or implied.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/init.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/i2c.h>
> > +#include <linux/ata_platform.h>
> > +#include <linux/mv643xx_eth.h>
> > +#include <linux/of.h>
> > +#include <linux/gpio.h>
> > +#include <linux/input.h>
> > +#include <linux/gpio_keys.h>
> > +#include <linux/gpio-fan.h>
> > +#include <linux/leds.h>
> > +#include <linux/mtd/physmap.h>
> > +#include <asm/mach-types.h>
> > +#include <asm/mach/arch.h>
> > +#include <asm/mach/map.h>
> > +#include <mach/kirkwood.h>
> > +#include <mach/bridge-regs.h>
> > +#include "common.h"
> > +#include "mpp.h"
> > +
> > +static struct mtd_partition dnskw_nand_parts[] = {
> > + {
> > + .name = "u-boot",
> > + .offset = 0,
> > + .size = SZ_1M,
> > + .mask_flags = MTD_WRITEABLE
> > + }, {
> > + .name = "uImage",
> > + .offset = MTDPART_OFS_NXTBLK,
> > + .size = 5 * SZ_1M
> > + }, {
> > + .name = "ramdisk",
> > + .offset = MTDPART_OFS_NXTBLK,
> > + .size = 5 * SZ_1M
> > + }, {
> > + .name = "image",
> > + .offset = MTDPART_OFS_NXTBLK,
> > + .size = 102 * SZ_1M
> > + }, {
> > + .name = "mini firmware",
> > + .offset = MTDPART_OFS_NXTBLK,
> > + .size = 10 * SZ_1M
> > + }, {
> > + .name = "config",
> > + .offset = MTDPART_OFS_NXTBLK,
> > + .size = 5 * SZ_1M
> > + },
> > +};
>
> This patch adds a static partition mapping, and then a later patch in
> this same series removes it again. Please don't do that. Just squash
> the patches together. Or, if sqashing is not appropriate, then just
> omit the partitions.
>
> I also suggest omiting similar data when there are patches already in
> progess to do it properly. It is okay for the inital support to go in
> to be incomplete when enhancements will be ready soon.
This is my doing. He was basing this off of dreamplug, which has SPI
NOR flash and partitions specified in the board file because the spi
driver is waiting for kirkwood to be converted to common clock. Jamie,
go ahead and drop the above in the initial board-dnskw.c patch and just
add support for nand/partitions in the last patch (fdt).
thx,
Jason.
More information about the devicetree-discuss
mailing list