[V2 3/5] powerpc: dts: klondike: Add UART nodes

[Tanmay Inamdar]

Adding UART nodes in Klondike device tree file.

Version 2:
Removed unnecessary 'virtual-reg' property from UART node.

Signed-off-by: Tanmay Inamdar <tinamdar at apm.com>
---
:100644 100644 4ff2852... b1e516e... M	arch/powerpc/boot/dts/klondike.dts
 arch/powerpc/boot/dts/klondike.dts |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
index 4ff2852..b1e516e 100644
--- a/arch/powerpc/boot/dts/klondike.dts
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -222,6 +222,28 @@
 				#size-cells = <1>;
 				ranges;
 				clock-frequency = <0>;
+
+				UART0: serial at 50001000 {
+				       device_type = "serial";
+				       compatible = "ns16550";
+				       reg = <0x50001000 0x00000100>;
+				       clock-frequency = <0>; /* Filled in by U-Boot */
+				       current-speed = <115200>;
+				       interrupt-parent = <&UIC0>;
+				       interrupts = <0x0 0x4>;
+				       reg-shift = <2>;
+				};
+
+				UART1: serial at 50002000 {
+				       device_type = "serial";
+				       compatible = "ns16550";
+				       reg = <0x50002000 0x00000100>;
+				       clock-frequency = <0>; /* Filled in by U-Boot */
+				       current-speed = <115200>;
+				       interrupt-parent = <&UIC0>;
+				       interrupts = <0x1 0x4>;
+				       reg-shift = <2>;
+			       };
 			};
 		};
 	};
-- 
1.6.1.rc3