[V2 1/5] powerpc: dts: klondike: Add AHB, APB bus; remove OPB bus

Tanmay Inamdar tinamdar at apm.com
Mon Apr 9 17:20:48 EST 2012


Add entries in klondike device tree for AHB and APB bus and remove entry for
non-existent OPB bus inherited from legacy code.

Signed-off-by: Tanmay Inamdar <tinamdar at apm.com>
---
:100644 100644 8c94290... 4ff2852... M	arch/powerpc/boot/dts/klondike.dts
 arch/powerpc/boot/dts/klondike.dts |  167 ++++++++++++++++++-----------------
 1 files changed, 86 insertions(+), 81 deletions(-)

diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
index 8c94290..4ff2852 100644
--- a/arch/powerpc/boot/dts/klondike.dts
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -132,96 +132,101 @@
 					/*RXDE*/  0x3 0x4>;
 		};
 
-		POB0: opb {
-			compatible = "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x20000000 0x20000000 0x30000000
-				  0x50000000 0x50000000 0x10000000
-				  0x60000000 0x60000000 0x10000000
-				  0xFE000000 0xFE000000 0x00010000>;
-			dcr-reg = <0x100 0x020>;
-			clock-frequency = <300000000>; /* Filled in by U-Boot */
+		RGMII0: emac-rgmii at 400a2000 {
+			compatible = "ibm,rgmii";
+			reg = <0x400a2000 0x00000010>;
+			has-mdio;
+		};
 
-			RGMII0: emac-rgmii at 400a2000 {
-				compatible = "ibm,rgmii";
-				reg = <0x400a2000 0x00000010>;
-				has-mdio;
-			};
+		TAH0: emac-tah at 400a3000 {
+			compatible = "ibm,tah";
+			reg = <0x400a3000 0x100>;
+		};
 
-			TAH0: emac-tah at 400a3000 {
-				compatible = "ibm,tah";
-				reg = <0x400a3000 0x100>;
-			};
+		TAH1: emac-tah at 400a4000 {
+			compatible = "ibm,tah";
+			reg = <0x400a4000 0x100>;
+		};
 
-			TAH1: emac-tah at 400a4000 {
-				compatible = "ibm,tah";
-				reg = <0x400a4000 0x100>;
-			};
+		EMAC0: ethernet at 400a0000 {
+			compatible = "ibm,emac4", "ibm-emac4sync";
+			interrupt-parent = <&EMAC0>;
+			interrupts = <0x0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+			reg = <0x400a0000 0x00000100>;
+			local-mac-address = [000000000000]; /* Filled in by U-Boot */
+			mal-device = <&MAL0>;
+			mal-tx-channel = <0x0>;
+			mal-rx-channel = <0x0>;
+			cell-index = <0>;
+			max-frame-size = <9000>;
+			rx-fifo-size = <4096>;
+			tx-fifo-size = <2048>;
+			phy-mode = "rgmii";
+			phy-address = <0x2>;
+			turbo = "no";
+			phy-map = <0x00000000>;
+			rgmii-device = <&RGMII0>;
+			rgmii-channel = <0>;
+			tah-device = <&TAH0>;
+			tah-channel = <0>;
+			has-inverted-stacr-oc;
+			has-new-stacr-staopc;
+		};
 
-			EMAC0: ethernet at 400a0000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
-				reg = <0x400a0000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x2>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
+		EMAC1: ethernet at 400a1000 {
+			compatible = "ibm,emac4", "ibm-emac4sync";
+			status = "disabled";
+			interrupt-parent = <&EMAC1>;
+			interrupts = <0x0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+			reg = <0x400a1000 0x00000100>;
+			local-mac-address = [000000000000]; /* Filled in by U-Boot */
+			mal-device = <&MAL0>;
+			mal-tx-channel = <1>;
+			mal-rx-channel = <8>;
+			cell-index = <1>;
+			max-frame-size = <9000>;
+			rx-fifo-size = <4096>;
+			tx-fifo-size = <2048>;
+			phy-mode = "rgmii";
+			phy-address = <0x3>;
+			turbo = "no";
+			phy-map = <0x00000000>;
+			rgmii-device = <&RGMII0>;
+			rgmii-channel = <1>;
+			tah-device = <&TAH1>;
+			tah-channel = <0>;
+			has-inverted-stacr-oc;
+			has-new-stacr-staopc;
+			mdio-device = <&EMAC0>;
+		};
 
-			EMAC1: ethernet at 400a1000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				status = "disabled";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
-				reg = <0x400a1000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x3>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
+		AHB: ahb {
+			compatible = "apm,ahb";
+			dcr-reg = <0xc 0x2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			APB: apb {
+				compatible = "apm,apb";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				clock-frequency = <0>;
 			};
 		};
 	};
 
 	chosen {
-		linux,stdout-path = "/plb/opb/serial at 50001000";
+		linux,stdout-path = "/plb/ahb/apb/serial at 50001000";
 	};
 };
-- 
1.6.1.rc3



More information about the devicetree-discuss mailing list