[RFC PATCH 2/2] WIP: PowerPC cache cleanup
Kyle Moffett
Kyle.D.Moffett at boeing.com
Tue Nov 15 13:33:35 EST 2011
This badly needs breaking up, and a better changelog... oh well...
The big changes:
* The "ppc64_caches" structure is now "powerpc_caches" and is used on
both PPC32 and PPC64. I hated staring at the pages and pages of
assembly code, so nearly all of the functions are now C with tiny
snippets of inline ASM in the loops.
* Lots of ugly assembly functions in arch/powerpc/kernel/misc_*.S were
rewritten as cleaner inline ASM in arch/powerpc/mm/cache.c
* I'm not sure that the physical address functions from those files
actually came out cleaner, but they are now more correct.
* I'm not 100% sure I like the new FOR_EACH_CACHE_LINE() macro, but it
sure does make a lot of the other code much cleaner.
* I have a bit of a temptation to try to merge the 32/64-bit variants
of copy_page() into a single C function. A quick test seems to show
that I can get nearly identical output to the 64-bit ASM with very
little work.
---
arch/powerpc/include/asm/cache.h | 155 ++++++++++++---
arch/powerpc/include/asm/cacheflush.h | 3 -
arch/powerpc/include/asm/page.h | 6 +
arch/powerpc/include/asm/page_32.h | 4 +-
arch/powerpc/include/asm/page_64.h | 17 --
arch/powerpc/kernel/align.c | 7 +-
arch/powerpc/kernel/asm-offsets.c | 13 +-
arch/powerpc/kernel/head_32.S | 9 +-
arch/powerpc/kernel/head_64.S | 2 +-
arch/powerpc/kernel/misc_32.S | 193 ------------------
arch/powerpc/kernel/misc_64.S | 182 -----------------
arch/powerpc/kernel/ppc_ksyms.c | 3 -
arch/powerpc/kernel/setup-common.c | 103 ++++++++++
arch/powerpc/kernel/setup.h | 1 +
arch/powerpc/kernel/setup_32.c | 11 +-
arch/powerpc/kernel/setup_64.c | 118 +----------
arch/powerpc/kernel/vdso.c | 27 +--
arch/powerpc/lib/copypage_64.S | 10 +-
arch/powerpc/mm/Makefile | 2 +-
arch/powerpc/mm/cache.c | 279 ++++++++++++++++++++++++++
arch/powerpc/mm/dma-noncoherent.c | 2 +-
arch/powerpc/platforms/52xx/lite5200_sleep.S | 9 +-
arch/powerpc/platforms/powermac/pci.c | 2 +-
arch/powerpc/xmon/xmon.c | 53 +++---
drivers/macintosh/smu.c | 8 +-
25 files changed, 599 insertions(+), 620 deletions(-)
create mode 100644 arch/powerpc/mm/cache.c
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 4b50941..b1dc08f 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -3,47 +3,142 @@
#ifdef __KERNEL__
-
-/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
-#define L1_CACHE_SHIFT 4
-#define MAX_COPY_PREFETCH 1
+/*
+ * Various PowerPC CPUs which are otherwise compatible have different L1
+ * cache line sizes.
+ *
+ * Unfortunately, lots of kernel code assumes that L1_CACHE_BYTES and
+ * L1_CACHE_SHIFT are compile-time constants that can be used to align
+ * data-structures to avoid false cacheline sharing, so we can't just
+ * compute them at runtime from the cputable values.
+ *
+ * So for alignment purposes, we will compute these values as safe maximums
+ * of all the CPU support compiled into the kernel.
+ */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PPC_47x)
+# define L1_CACHE_SHIFT_MAX 7 /* 128-byte cache blocks */
#elif defined(CONFIG_PPC_E500MC)
-#define L1_CACHE_SHIFT 6
-#define MAX_COPY_PREFETCH 4
-#elif defined(CONFIG_PPC32)
-#define MAX_COPY_PREFETCH 4
-#if defined(CONFIG_PPC_47x)
-#define L1_CACHE_SHIFT 7
+# define L1_CACHE_SHIFT_MAX 6 /* 64-byte cache blocks */
#else
-#define L1_CACHE_SHIFT 5
+# define L1_CACHE_SHIFT_MAX 5 /* 32-byte cache blocks */
#endif
+#define L1_CACHE_BYTES_MAX (1 << L1_CACHE_SHIFT_MAX)
+
+#define L1_CACHE_SHIFT L1_CACHE_SHIFT_MAX
+#define L1_CACHE_BYTES L1_CACHE_BYTES_MAX
+#define SMP_CACHE_BYTES L1_CACHE_BYTES_MAX
+
+/*
+ * Unfortunately, for other purposes, we can't just use a safe maximum value
+ * because it gets used in loops when invalidating or clearing cachelines and
+ * it would be very bad to only flush/invalidate/zero/etc every 4th one.
+ *
+ * During early initialization we load these values from the device-tree and
+ * the cputable into the powerpc_caches structure, but we need to be able to
+ * clear pages before that occurs, so these need sane default values.
+ *
+ * As explained in the powerpc_caches structure definition, the defaults
+ * should be safe minimums, so that's what we compute here.
+ */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+# define L1_CACHE_SHIFT_MIN 4 /* 16-byte cache blocks */
+#elif defined(CONFIG_PPC32)
+# define L1_CACHE_SHIFT_MIN 5 /* 32-byte cache blocks */
#else /* CONFIG_PPC64 */
-#define L1_CACHE_SHIFT 7
+# define L1_CACHE_SHIFT_MIN 6 /* 64-byte cache blocks */
#endif
+#define L1_CACHE_BYTES_MIN (1 << L1_CACHE_SHIFT_MIN)
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+/*
+ * Apparently the 8xx and the 403GCX have tiny caches, so they never prefetch
+ * more than a single cacheline in the ASM memory copy functions.
+ *
+ * All other 32-bit CPUs prefetch 4 cachelines, and the 64-bit CPUs have
+ * their own copy routines which prefetch the entire page.
+ */
+#ifdef PPC32
+# if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+# define MAX_COPY_PREFETCH 1
+# else
+# define MAX_COPY_PREFETCH 4
+# endif
+#endif
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
+#ifndef __ASSEMBLY__
-#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
-struct ppc64_caches {
- u32 dsize; /* L1 d-cache size */
- u32 dline_size; /* L1 d-cache line size */
- u32 log_dline_size;
- u32 dlines_per_page;
- u32 isize; /* L1 i-cache size */
- u32 iline_size; /* L1 i-cache line size */
- u32 log_iline_size;
- u32 ilines_per_page;
-};
+/*
+ * A handy macro to iterate over all the cachelines referring to memory from
+ * "START" through "STOP - 1", inclusive.
+ */
+#define FOR_EACH_CACHELINE(LINE, START, STOP, CACHE) \
+ for (u32 linesize__ = powerpc_caches.CACHE##_block_bytes, \
+ (LINE) = (START) & ~(linesize__ - 1); \
+ (LINE) < (STOP); (LINE) += linesize__)
+
+/* Write out a data cache block if it is dirty */
+static inline void dcbst(unsigned long addr)
+{
+ asm volatile("dcbst %y0" :: "Z"(addr) : "memory");
+}
-extern struct ppc64_caches ppc64_caches;
-#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+/* Invalidate a data cache block (will lose data if dirty!) */
+static inline void dcbi(unsigned long addr)
+{
+ asm volatile("dcbi %y0" :: "Z"(addr) : "memory");
+}
+
+/* Write out (if dirty) and invalidate a data cache block */
+static inline void dcbf(unsigned long addr)
+{
+ asm volatile("dcbf %y0" :: "Z"(addr) : "memory");
+}
+
+/* Populate a data cache block with zeros */
+static inline void dcbz(unsigned long addr)
+{
+ asm volatile("dcbz %y0" :: "Z"(addr) : "memory");
+}
+
+/* Invalidate an instruction cache block */
+static inline void icbi(unsigned long addr)
+{
+ asm volatile("icbi %y0" :: "Z"(addr) : "memory");
+}
+
+/*
+ * This structure contains the various PowerPC cache parameters computed
+ * shortly after the device-tree has been unflattened during boot.
+ *
+ * Prior to that they have statically initialized values from L1_CACHE_*_MIN
+ * computed above.
+ *
+ * NOTE: If the dcache/icache are separate then ucache_* should be zeroed,
+ * otherwise dcache == icache == ucache.
+ */
+struct powerpc_caches {
+ /* Data cache parameters */
+ u32 dcache_total_bytes;
+ u32 dcache_block_bytes;
+ u32 dcache_block_shift;
+ u32 dcache_blocks_per_page;
+
+ /* Instruction cache parameters */
+ u32 icache_total_bytes;
+ u32 icache_block_bytes;
+ u32 icache_block_shift;
+ u32 icache_blocks_per_page;
+
+ /* Unified cache parameters (If != 0, all 3 caches must be equal) */
+ u32 ucache_total_bytes;
+ u32 ucache_block_bytes;
+ u32 ucache_block_shift;
+ u32 ucache_blocks_per_page;
+};
+extern struct powerpc_caches powerpc_caches;
-#if !defined(__ASSEMBLY__)
#define __read_mostly __attribute__((__section__(".data..read_mostly")))
-#endif
+
+#endif /* not __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ab9e402..8646443 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -47,12 +47,9 @@ extern void __flush_dcache_icache_phys(unsigned long physaddr);
#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
extern void flush_dcache_range(unsigned long start, unsigned long stop);
-#ifdef CONFIG_PPC32
extern void clean_dcache_range(unsigned long start, unsigned long stop);
extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
-#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
-extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
#endif
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index dd9c4fd..b2e24ce 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -286,11 +286,17 @@ static inline int hugepd_ok(hugepd_t hpd)
#endif /* CONFIG_HUGETLB_PAGE */
struct page;
+extern void clear_pages(void *page, int order);
extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *p);
extern int page_is_ram(unsigned long pfn);
+static inline void clear_page(void *page)
+{
+ clear_pages(page, 0);
+}
+
#ifdef CONFIG_PPC_SMLPAR
void arch_free_page(struct page *page, int order);
#define HAVE_ARCH_FREE_PAGE
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index 68d73b2..12ae694 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -10,7 +10,7 @@
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
#ifdef CONFIG_NOT_COHERENT_CACHE
-#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES_MAX
#endif
#ifdef CONFIG_PTE_64BIT
@@ -37,8 +37,6 @@ typedef unsigned long pte_basic_t;
#endif
struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
extern void copy_page(void *to, void *from);
#include <asm-generic/getorder.h>
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index fb40ede..7e156f6 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -42,23 +42,6 @@
typedef unsigned long pte_basic_t;
-static __inline__ void clear_page(void *addr)
-{
- unsigned long lines, line_size;
-
- line_size = ppc64_caches.dline_size;
- lines = ppc64_caches.dlines_per_page;
-
- __asm__ __volatile__(
- "mtctr %1 # clear_page\n\
-1: dcbz 0,%0\n\
- add %0,%0,%3\n\
- bdnz+ 1b"
- : "=r" (addr)
- : "r" (lines), "0" (addr), "r" (line_size)
- : "ctr", "memory");
-}
-
extern void copy_page(void *to, void *from);
/* Log 2 of page table size */
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 8184ee9..debfb99 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -233,14 +233,9 @@ static inline unsigned make_dsisr(unsigned instr)
*/
static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
{
+ int i, size = powerpc_caches.dcache_block_bytes;
long __user *p;
- int i, size;
-#ifdef __powerpc64__
- size = ppc64_caches.dline_size;
-#else
- size = L1_CACHE_BYTES;
-#endif
p = (long __user *) (regs->dar & -size);
if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
return -EFAULT;
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 7c5324f..505b25a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -126,13 +126,14 @@ int main(void)
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(DCACHE_BLOCK_SHIFT, offsetof(struct powerpc_caches, dcache_block_shift));
+ DEFINE(DCACHE_BLOCK_BYTES, offsetof(struct powerpc_caches, dcache_block_bytes));
+ DEFINE(DCACHE_BLOCKS_PER_PAGE, offsetof(struct powerpc_caches, dcache_blocks_per_page));
+ DEFINE(ICACHE_BLOCK_SHIFT, offsetof(struct powerpc_caches, icache_block_shift));
+ DEFINE(ICACHE_BLOCK_BYTES, offsetof(struct powerpc_caches, icache_block_bytes));
+ DEFINE(ICACHE_BLOCKS_PER_PAGE, offsetof(struct powerpc_caches, icache_blocks_per_page));
+
#ifdef CONFIG_PPC64
- DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
- DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size));
- DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page));
- DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
- DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
- DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
/* paca */
DEFINE(PACA_SIZE, sizeof(struct paca_struct));
DEFINE(PACA_LOCK_TOKEN, offsetof(struct paca_struct, lock_token));
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0654dba..8abc44a 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -786,7 +786,14 @@ relocate_kernel:
_ENTRY(copy_and_flush)
addi r5,r5,-4
addi r6,r6,-4
-4: li r0,L1_CACHE_BYTES/4
+4: li r0,L1_CACHE_BYTES_MIN/4 /* Use the smallest common */
+ /* denominator cache line */
+ /* size. This results in */
+ /* extra cache line flushes */
+ /* but operation is correct. */
+ /* Can't get cache line size */
+ /* from device-tree yet */
+
mtctr r0
3: addi r6,r6,4 /* copy a cache line */
lwzx r0,r6,r4
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 06c7251..183d371 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -480,7 +480,7 @@ p_end: .llong _end - _stext
_GLOBAL(copy_and_flush)
addi r5,r5,-8
addi r6,r6,-8
-4: li r0,8 /* Use the smallest common */
+4: li r0,L1_CACHE_BYTES_MIN/8 /* Use the smallest common */
/* denominator cache line */
/* size. This results in */
/* extra cache line flushes */
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index f7d760a..ee61600 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -321,199 +321,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
blr
/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_KPROBE(__flush_icache_range)
-BEGIN_FTR_SECTION
- blr /* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
-#ifndef CONFIG_44x
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
-#else
- /* Flash invalidate on 44x because we are passed kmapped addresses and
- this doesn't work for userspace pages due to the virtually tagged
- icache. Sigh. */
- iccci 0, r0
-#endif
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-BEGIN_FTR_SECTION
- blr
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
- rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
- li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,L1_CACHE_BYTES
- bdnz 0b
- sync
-#ifdef CONFIG_44x
- /* We don't flush the icache on 44x. Those have a virtual icache
- * and we don't have access to the virtual address here (it's
- * not the page vaddr but where it's mapped in user space). The
- * flushing of the icache on these is handled elsewhere, when
- * a change in the address space occurs, before returning to
- * user space
- */
-BEGIN_MMU_FTR_SECTION
- blr
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
-#endif /* CONFIG_44x */
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 1b
- sync
- isync
- blr
-
-#ifndef CONFIG_BOOKE
-/*
- * Flush a particular page from the data cache to RAM, identified
- * by its physical address. We turn off the MMU so we can just use
- * the physical address (this may be a highmem page without a kernel
- * mapping).
- *
- * void __flush_dcache_icache_phys(unsigned long physaddr)
- */
-_GLOBAL(__flush_dcache_icache_phys)
-BEGIN_FTR_SECTION
- blr /* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
- mfmsr r10
- rlwinm r0,r10,0,28,26 /* clear DR */
- mtmsr r0
- isync
- rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
- li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,L1_CACHE_BYTES
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 1b
- sync
- mtmsr r10 /* restore DR */
- isync
- blr
-#endif /* CONFIG_BOOKE */
-
-/*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
- li r0,PAGE_SIZE/L1_CACHE_BYTES
- slw r0,r0,r4
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- blr
-
-/*
* Copy a whole page. We use the dcbz instruction on the destination
* to reduce memory traffic (it eliminates the unnecessary reads of
* the destination into cache). This requires that the destination
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 616921e..500fd61 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -53,188 +53,6 @@ _GLOBAL(call_handle_irq)
mtlr r0
blr
- .section ".toc","aw"
-PPC64_CACHES:
- .tc ppc64_caches[TC],ppc64_caches
- .section ".text"
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- *
- * flush all bytes from start through stop-1 inclusive
- */
-
-_KPROBE(__flush_icache_range)
-
-/*
- * Flush the data cache to memory
- *
- * Different systems have different cache line sizes
- * and in some cases i-cache and d-cache line sizes differ from
- * each other.
- */
- ld r10,PPC64_CACHES at toc(r2)
- lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5 /* ensure we get enough */
- lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */
- srw. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mtctr r8
-1: dcbst 0,r6
- add r6,r6,r7
- bdnz 1b
- sync
-
-/* Now invalidate the instruction cache */
-
- lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5
- lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */
- srw. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mtctr r8
-2: icbi 0,r6
- add r6,r6,r7
- bdnz 2b
- isync
- blr
- .previous .text
-/*
- * Like above, but only do the D-cache.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- *
- * flush all bytes from start to stop-1 inclusive
- */
-_GLOBAL(flush_dcache_range)
-
-/*
- * Flush the data cache to memory
- *
- * Different systems have different cache line sizes
- */
- ld r10,PPC64_CACHES at toc(r2)
- lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5 /* ensure we get enough */
- lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
- srw. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mtctr r8
-0: dcbst 0,r6
- add r6,r6,r7
- bdnz 0b
- sync
- blr
-
-/*
- * Like above, but works on non-mapped physical addresses.
- * Use only for non-LPAR setups ! It also assumes real mode
- * is cacheable. Used for flushing out the DART before using
- * it as uncacheable memory
- *
- * flush_dcache_phys_range(unsigned long start, unsigned long stop)
- *
- * flush all bytes from start to stop-1 inclusive
- */
-_GLOBAL(flush_dcache_phys_range)
- ld r10,PPC64_CACHES at toc(r2)
- lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5 /* ensure we get enough */
- lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
- srw. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- mfmsr r5 /* Disable MMU Data Relocation */
- ori r0,r5,MSR_DR
- xori r0,r0,MSR_DR
- sync
- mtmsr r0
- sync
- isync
- mtctr r8
-0: dcbst 0,r6
- add r6,r6,r7
- bdnz 0b
- sync
- isync
- mtmsr r5 /* Re-enable MMU Data Relocation */
- sync
- isync
- blr
-
-_GLOBAL(flush_inval_dcache_range)
- ld r10,PPC64_CACHES at toc(r2)
- lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
- addi r5,r7,-1
- andc r6,r3,r5 /* round low to line bdy */
- subf r8,r6,r4 /* compute length */
- add r8,r8,r5 /* ensure we get enough */
- lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
- srw. r8,r8,r9 /* compute line count */
- beqlr /* nothing to do? */
- sync
- isync
- mtctr r8
-0: dcbf 0,r6
- add r6,r6,r7
- bdnz 0b
- sync
- isync
- blr
-
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-/*
- * Flush the data cache to memory
- *
- * Different systems have different cache line sizes
- */
-
-/* Flush the dcache */
- ld r7,PPC64_CACHES at toc(r2)
- clrrdi r3,r3,PAGE_SHIFT /* Page align */
- lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */
- lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */
- mr r6,r3
- mtctr r4
-0: dcbst 0,r6
- add r6,r6,r5
- bdnz 0b
- sync
-
-/* Now invalidate the icache */
-
- lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */
- lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */
- mtctr r4
-1: icbi 0,r3
- add r3,r3,r5
- bdnz 1b
- isync
- blr
-
-
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
* Do an IO access in real mode
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index acba8ce..ccdceb7 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -53,7 +53,6 @@ extern void program_check_exception(struct pt_regs *regs);
extern void single_step_exception(struct pt_regs *regs);
extern int sys_sigreturn(struct pt_regs *regs);
-EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
@@ -113,8 +112,6 @@ EXPORT_SYMBOL(giveup_spe);
#ifndef CONFIG_PPC64
EXPORT_SYMBOL(flush_instruction_cache);
#endif
-EXPORT_SYMBOL(__flush_icache_range);
-EXPORT_SYMBOL(flush_dcache_range);
#ifdef CONFIG_SMP
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 77bb77d..3abfea4 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -83,6 +83,54 @@ unsigned long klimit = (unsigned long) _end;
char cmd_line[COMMAND_LINE_SIZE];
/*
+ * Initialize these values to minimum safe defaults in case they need to be
+ * used early during the boot process. While this may not seem safe, it is
+ * actually safe in practice, because all of the kernel loops that use this
+ * data operate on whole pages.
+ *
+ * The PowerPC Book III-E spec documents that the pagesize is an even
+ * multiple of the cache block size and the cache blocks are always
+ * page-aligned.
+ *
+ * So, for example, when clearing a whole page there are only two things that
+ * can be done wrong with "dcbz":
+ *
+ * (1) Call "dcbz" with an address outside the page you want to zero.
+ *
+ * (2) Call "dcbz" too few times to actually hit all of the cachelines,
+ * IE: Use a too-large cacheline stride.
+ *
+ * So as long as we ensure that this number is small enough for the current
+ * CPU everything will operate correctly, albeit with a slight performance
+ * hit, until we get a chance to parse the device-tree for the right value.
+ *
+ * NOTE: Userspace expects an exact value, so none of the above applies after
+ * the device tree has been unflattened and actual values computed.
+ *
+ * See arch/powerpc/asm/caches.h for more information.
+ */
+struct powerpc_caches powerpc_caches = {
+ /* Data cache sizes */
+ .dcache_total_bytes = 0, /* Unknown */
+ .dcache_block_bytes = L1_CACHE_BYTES_MIN,
+ .dcache_block_shift = L1_CACHE_SHIFT_MIN,
+ .dcache_blocks_per_page = (PAGE_SIZE >> L1_CACHE_SHIFT_MIN),
+
+ /* Instruction cache sizes */
+ .icache_total_bytes = 0,
+ .icache_block_bytes = L1_CACHE_BYTES_MIN,
+ .icache_block_shift = L1_CACHE_SHIFT_MIN,
+ .icache_blocks_per_page = (PAGE_SIZE >> L1_CACHE_SHIFT_MIN),
+
+ /* Unified cache (assume cache is split by default) */
+ .ucache_total_bytes = 0,
+ .ucache_block_bytes = 0,
+ .ucache_block_shift = 0,
+ .ucache_blocks_per_page = 0,
+};
+EXPORT_SYMBOL_GPL(powerpc_caches);
+
+/*
* This still seems to be needed... -- paulus
*/
struct screen_info screen_info = {
@@ -349,6 +397,61 @@ const struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
+/* Helper functions to compute various values from a cache block size */
+static void __init set_dcache_block_data(u32 bytes)
+{
+ u32 shift = __ilog2(bytes);
+ powerpc_caches.dcache_block_bytes = bytes;
+ powerpc_caches.dcache_block_shift = shift;
+ powerpc_caches.dcache_blocks_per_page = (PAGE_SIZE >> shift);
+}
+static void __init set_icache_block_data(u32 bytes)
+{
+ u32 shift = __ilog2(bytes);
+ powerpc_caches.icache_block_bytes = bytes;
+ powerpc_caches.icache_block_shift = shift;
+ powerpc_caches.icache_blocks_per_page = (PAGE_SIZE >> shift);
+}
+
+/*
+ * Preinitialize the powerpc_caches structure from the cputable. We will
+ * later scan the device-tree for this information, which may be more
+ * accurate.
+ */
+void __init initialize_early_cache_info(void)
+{
+ set_dcache_block_data(cur_cpu_spec->dcache_bsize);
+ set_icache_block_data(cur_cpu_spec->icache_bsize);
+}
+
+/*
+ * Initialize the powerpc_caches structure from the device-tree for use by
+ * copy_page(), cache flush routines, and AT_DCACHEBSIZE elf headers.
+ *
+ * In the unlikely event that the device-tree doesn't have this information,
+ * the defaults loaded by initialize_early_cache_info() from the cputable
+ * will be used.
+ */
+void __init initialize_cache_info(void)
+{
+ /* Assume that the cache properties are the same across all nodes */
+ struct device_node *np = of_find_node_by_type(NULL, "cpu");
+ u32 value = 0;
+
+ /* First check data/instruction cache block sizes */
+ if ( !of_property_read_u32(np, "d-cache-block-size", &value) ||
+ !of_property_read_u32(np, "d-cache-line-size", &value))
+ set_dcache_block_data(value);
+
+ if ( !of_property_read_u32(np, "i-cache-block-size", &value) ||
+ !of_property_read_u32(np, "i-cache-line-size", &value))
+ set_icache_block_data(value);
+
+ /* Also read total cache sizes (no defaults here) */
+ of_property_read_u32(np, "d-cache-size", &powerpc_caches.dcache_total_bytes);
+ of_property_read_u32(np, "i-cache-size", &powerpc_caches.icache_total_bytes);
+}
+
void __init check_for_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/powerpc/kernel/setup.h b/arch/powerpc/kernel/setup.h
index 4c67ad7..1ae16ec 100644
--- a/arch/powerpc/kernel/setup.h
+++ b/arch/powerpc/kernel/setup.h
@@ -1,6 +1,7 @@
#ifndef _POWERPC_KERNEL_SETUP_H
#define _POWERPC_KERNEL_SETUP_H
+void initialize_cache_info(void);
void check_for_initrd(void);
void do_init_bootmem(void);
void setup_panic(void);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index c1ce863..1db2bfb 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -63,14 +63,6 @@ EXPORT_SYMBOL(vgacon_remap_base);
#endif
/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
* -- Cort <cort at fsmlabs.com>
@@ -286,10 +278,13 @@ void __init setup_arch(char **cmdline_p)
{
*cmdline_p = cmd_line;
+ initialize_early_cache_info();
+
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
+ initialize_cache_info();
check_for_initrd();
if (ppc_md.init_early)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1a9dea8..bb686de 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -77,25 +77,6 @@ int boot_cpuid = 0;
int __initdata spinning_secondaries;
u64 ppc64_pft_size;
-/* Pick defaults since we might want to patch instructions
- * before we've read this from the device tree.
- */
-struct ppc64_caches ppc64_caches = {
- .dline_size = 0x40,
- .log_dline_size = 6,
- .iline_size = 0x40,
- .log_iline_size = 6
-};
-EXPORT_SYMBOL_GPL(ppc64_caches);
-
-/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
#ifdef CONFIG_SMP
static char *smt_enabled_cmdline;
@@ -265,82 +246,6 @@ void smp_release_cpus(void)
#endif /* CONFIG_SMP || CONFIG_KEXEC */
/*
- * Initialize some remaining members of the ppc64_caches and systemcfg
- * structures
- * (at least until we get rid of them completely). This is mostly some
- * cache informations about the CPU that will be used by cache flush
- * routines and/or provided to userland
- */
-static void __init initialize_cache_info(void)
-{
- struct device_node *np;
- unsigned long num_cpus = 0;
-
- DBG(" -> initialize_cache_info()\n");
-
- for_each_node_by_type(np, "cpu") {
- num_cpus += 1;
-
- /*
- * We're assuming *all* of the CPUs have the same
- * d-cache and i-cache sizes... -Peter
- */
- if (num_cpus == 1) {
- const u32 *sizep, *lsizep;
- u32 size, lsize;
-
- size = 0;
- lsize = cur_cpu_spec->dcache_bsize;
- sizep = of_get_property(np, "d-cache-size", NULL);
- if (sizep != NULL)
- size = *sizep;
- lsizep = of_get_property(np, "d-cache-block-size",
- NULL);
- /* fallback if block size missing */
- if (lsizep == NULL)
- lsizep = of_get_property(np,
- "d-cache-line-size",
- NULL);
- if (lsizep != NULL)
- lsize = *lsizep;
- if (sizep == 0 || lsizep == 0)
- DBG("Argh, can't find dcache properties ! "
- "sizep: %p, lsizep: %p\n", sizep, lsizep);
-
- ppc64_caches.dsize = size;
- ppc64_caches.dline_size = lsize;
- ppc64_caches.log_dline_size = __ilog2(lsize);
- ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
-
- size = 0;
- lsize = cur_cpu_spec->icache_bsize;
- sizep = of_get_property(np, "i-cache-size", NULL);
- if (sizep != NULL)
- size = *sizep;
- lsizep = of_get_property(np, "i-cache-block-size",
- NULL);
- if (lsizep == NULL)
- lsizep = of_get_property(np,
- "i-cache-line-size",
- NULL);
- if (lsizep != NULL)
- lsize = *lsizep;
- if (sizep == 0 || lsizep == 0)
- DBG("Argh, can't find icache properties ! "
- "sizep: %p, lsizep: %p\n", sizep, lsizep);
-
- ppc64_caches.isize = size;
- ppc64_caches.iline_size = lsize;
- ppc64_caches.log_iline_size = __ilog2(lsize);
- ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
- }
- }
-
- DBG(" <- initialize_cache_info()\n");
-}
-
-
-/*
* Do some initial setup of the system. The parameters are those which
* were passed in from the bootloader.
*/
@@ -365,10 +270,7 @@ void __init setup_system(void)
*/
unflatten_device_tree();
- /*
- * Fill the ppc64_caches & systemcfg structures with informations
- * retrieved from the device-tree.
- */
+ /* Fill the powerpc_caches structure with device-tree data */
initialize_cache_info();
#ifdef CONFIG_PPC_RTAS
@@ -423,12 +325,10 @@ void __init setup_system(void)
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
printk("physicalMemorySize = 0x%llx\n", memblock_phys_mem_size());
- if (ppc64_caches.dline_size != 0x80)
- printk("ppc64_caches.dcache_line_size = 0x%x\n",
- ppc64_caches.dline_size);
- if (ppc64_caches.iline_size != 0x80)
- printk("ppc64_caches.icache_line_size = 0x%x\n",
- ppc64_caches.iline_size);
+ if (powerpc_caches.dcache_block_bytes != 0x80)
+ printk("dcache_block_bytes = 0x%x\n", powerpc_caches.dcache_block_bytes);
+ if (powerpc_caches.icache_block_bytes != 0x80)
+ printk("icache_block_bytes = 0x%x\n", powerpc_caches.icache_block_bytes);
#ifdef CONFIG_PPC_STD_MMU_64
if (htab_address)
printk("htab_address = 0x%p\n", htab_address);
@@ -545,13 +445,7 @@ void __init setup_arch(char **cmdline_p)
*cmdline_p = cmd_line;
- /*
- * Set cache line size based on type of cpu as a default.
- * Systems with OF can look in the properties on the cpu node(s)
- * for a possibly more accurate value.
- */
- dcache_bsize = ppc64_caches.dline_size;
- icache_bsize = ppc64_caches.iline_size;
+ initialize_early_cache_info();
/* reboot on panic */
panic_timeout = 180;
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 7d14bb6..4a038fb 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -726,6 +726,7 @@ static int __init vdso_init(void)
vdso_data->version.major = SYSTEMCFG_MAJOR;
vdso_data->version.minor = SYSTEMCFG_MINOR;
vdso_data->processor = mfspr(SPRN_PVR);
+
/*
* Fake the old platform number for pSeries and iSeries and add
* in LPAR bit if necessary
@@ -734,29 +735,25 @@ static int __init vdso_init(void)
if (firmware_has_feature(FW_FEATURE_LPAR))
vdso_data->platform |= 1;
vdso_data->physicalMemorySize = memblock_phys_mem_size();
- vdso_data->dcache_size = ppc64_caches.dsize;
- vdso_data->dcache_line_size = ppc64_caches.dline_size;
- vdso_data->icache_size = ppc64_caches.isize;
- vdso_data->icache_line_size = ppc64_caches.iline_size;
- /* XXXOJN: Blocks should be added to ppc64_caches and used instead */
- vdso_data->dcache_block_size = ppc64_caches.dline_size;
- vdso_data->icache_block_size = ppc64_caches.iline_size;
- vdso_data->dcache_log_block_size = ppc64_caches.log_dline_size;
- vdso_data->icache_log_block_size = ppc64_caches.log_iline_size;
+ /* There are more cache parameters saved for 64-bit than 32-bit */
+ vdso_data->dcache_size = powerpc_caches.dcache_total_size;
+ vdso_data->icache_size = powerpc_caches.icache_total_size;
+ vdso_data->dcache_line_size = powerpc_caches.dcache_block_bytes;
+ vdso_data->icache_line_size = powerpc_caches.icache_block_bytes;
/*
* Calculate the size of the 64 bits vDSO
*/
vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT;
DBG("vdso64_kbase: %p, 0x%x pages\n", vdso64_kbase, vdso64_pages);
-#else
- vdso_data->dcache_block_size = L1_CACHE_BYTES;
- vdso_data->dcache_log_block_size = L1_CACHE_SHIFT;
- vdso_data->icache_block_size = L1_CACHE_BYTES;
- vdso_data->icache_log_block_size = L1_CACHE_SHIFT;
-#endif /* CONFIG_PPC64 */
+#endif
+ /* Save the cache-block sizes for the VDSO */
+ vdso_data->dcache_block_size = powerpc_caches.dcache_block_bytes;
+ vdso_data->icache_block_size = powerpc_caches.icache_block_bytes;
+ vdso_data->dcache_log_block_size = powerpc_caches.dcache_block_shift;
+ vdso_data->icache_log_block_size = powerpc_caches.icache_block_shift;
/*
* Calculate the size of the 32 bits vDSO
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 53dcb6b..c466977 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -12,17 +12,17 @@
#include <asm/asm-offsets.h>
.section ".toc","aw"
-PPC64_CACHES:
- .tc ppc64_caches[TC],ppc64_caches
+POWERPC_CACHES:
+ .tc powerpc_caches[TC],powerpc_caches
.section ".text"
_GLOBAL(copy_page)
lis r5,PAGE_SIZE at h
ori r5,r5,PAGE_SIZE at l
BEGIN_FTR_SECTION
- ld r10,PPC64_CACHES at toc(r2)
- lwz r11,DCACHEL1LOGLINESIZE(r10) /* log2 of cache line size */
- lwz r12,DCACHEL1LINESIZE(r10) /* get cache line size */
+ ld r10,POWERPC_CACHES at toc(r2)
+ lwz r11,DCACHE_BLOCK_SHIFT(r10) /* log2 of cache line size */
+ lwz r12,DCACHE_BLOCK_BYTES(r10) /* get cache line size */
li r9,0
srd r8,r5,r11
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 991ee81..8ad36a9 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
-obj-y := fault.o mem.o pgtable.o gup.o \
+obj-y := cache.o fault.o mem.o pgtable.o gup.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
diff --git a/arch/powerpc/mm/cache.c b/arch/powerpc/mm/cache.c
new file mode 100644
index 0000000..0fbf2d6
--- /dev/null
+++ b/arch/powerpc/mm/cache.c
@@ -0,0 +1,279 @@
+#include <linux/kprobes.h>
+#include <linux/export.h>
+#include <linux/types.h>
+
+#include <asm/cputable.h>
+#include <asm/system.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ */
+void clean_dcache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long addr;
+ FOR_EACH_CACHELINE(addr, start, stop, dcache)
+ dcbst(addr);
+ mb();
+}
+
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long addr;
+ FOR_EACH_CACHELINE(addr, start, stop, dcache)
+ dcbf(addr);
+ mb();
+}
+EXPORT_SYMBOL(flush_dcache_range);
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long addr;
+ FOR_EACH_CACHELINE(addr, start, stop, dcache)
+ dcbi(addr);
+ mb();
+}
+
+/*
+ * Unfortunately, we cannot flush individual chunks of the icache on 44x as
+ * we are passed kmapped addresses and we have a virtually-tagged icache.
+ *
+ * The only workaround is to invalidate the whole icache.
+ *
+ * NOTE: The CPU does not use the operands for this instruction, so
+ * they are passed as dummies.
+ */
+__kprobes void __flush_icache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long addr;
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+
+ /* First ensure that data has been written to memory */
+ FOR_EACH_CACHELINE(addr, start, stop, dcache)
+ dcbst(addr);
+ mb();
+
+#ifdef CONFIG_44x
+ if (mmu_has_feature(MMU_FTR_TYPE_44x)) {
+ asm volatile("iccci 0, r0" ::: "memory");
+ return;
+ }
+#endif
+
+ /* Now discard the corresponding icache */
+ FOR_EACH_CACHELINE(addr, start, stop, icache)
+ icbi(addr);
+ mb();
+ isync();
+}
+EXPORT_SYMBOL(__flush_icache_range);
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ * void __flush_dcache_icache(void *page)
+ */
+void __flush_dcache_icache(void *page)
+{
+ unsigned long base = ((unsigned long)page) & ~(PAGE_SIZE-1);
+ unsigned long addr;
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+
+ /* First ensure that data has been written to memory */
+ FOR_EACH_CACHELINE(addr, base, base + PAGE_SIZE, dcache)
+ dcbst(addr);
+
+#ifdef CONFIG_44x
+ /*
+ * We don't flush the icache on 44x. Those have a virtual icache and
+ * we don't have access to the virtual address here (it's not the
+ * page vaddr but where it's mapped in user space). The flushing of
+ * the icache on these is handled elsewhere, when a change in the
+ * address space occurs, before returning to user space.
+ */
+ if (mmu_has_feature(MMU_FTR_TYPE_44x))
+ return;
+#endif
+
+ FOR_EACH_CACHELINE(addr, base, base + PAGE_SIZE, icache)
+ icbi(addr);
+
+ mb();
+ isync();
+}
+
+/*
+ * Clear pages using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced). This only works on cacheable memory.
+ *
+ */
+void clear_pages(void *page, int order)
+{
+ unsigned long addr, base = (unsigned long)page;
+ FOR_EACH_CACHELINE(addr, base, base + (PAGE_SIZE << order), dcache)
+ dcbz(addr);
+}
+EXPORT_SYMBOL(clear_pages);
+
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+/*
+ * Flush a particular page from the data cache to RAM, identified
+ * by its physical address. We turn off the MMU so we can just use
+ * the physical address (this may be a highmem page without a kernel
+ * mapping).
+ */
+void __flush_dcache_icache_phys(unsigned long phys_page)
+{
+ u32 d_size = powerpc_caches.dcache_block_bytes;
+ u32 i_size = powerpc_caches.icache_block_bytes;
+ u32 d_per_page = powerpc_caches.dcache_blocks_per_page;
+ u32 i_per_page = powerpc_caches.icache_blocks_per_page;
+
+ /* Temporary registers for the ASM to use */
+ unsigned long old_msr, tmp_msr, d_phys_page, i_phys_page;
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+
+ /* Page base address (used in 2 different loops) */
+ d_phys_page = i_phys_page = phys_page & ~(PAGE_SIZE - 1);
+
+ /*
+ * This part needs to be 100% ASM because we disable the MMU, and we
+ * can't accidentally let some C code go poking at memory while the
+ * MMU isn't enabled.
+ *
+ * NOTE: This looks blatantly unsafe with respect to interrupts.
+ * Hopefully all the callers provide sufficient protection?
+ */
+ asm volatile(
+ /* First disable the MMU */
+ "mfmsr %[old_msr]\n\t"
+ "rlwinm %[tmp_msr], %[old_msr], 0, 28, 26\n\t"
+ "mtmsr %[tmp_msr]\n\t"
+ "isync\n\t"
+
+ /* Clean the data cache */
+ "mtctr %[d_per_page]\n"
+ "0: dcbst 0, %[d_phys_page]\n\t"
+ "add %[d_phys_page], %[d_phys_page], %[d_size]\n\t"
+ "bdnz 0b\n\t"
+ "sync\n\t"
+
+ /* Invalidate the instruction cache */
+ "mtctr %[i_per_page]\n"
+ "0: icbi 0, %[i_phys_page]\n\t"
+ "add %[i_phys_page], %[i_phys_page], %[i_size]\n\t"
+ "bdnz 0b\n\t"
+
+ /* Finally, re-enable the MMU */
+ "sync\n\t"
+ "mtmsr %[old_msr]\n\t"
+ "isync\n\t"
+
+ /* Temporary variables and inputs */
+ : [old_msr] "=&r" (old_msr),
+ [tmp_msr] "=&r" (tmp_msr),
+ [d_phys_page] "=b" (d_phys_page),
+ [i_phys_page] "=b" (i_phys_page)
+
+ /* Inputs */
+ : [d_size] "b" (d_size),
+ [i_size] "b" (i_size),
+ [d_per_page] "b" (d_per_page),
+ [i_per_page] "b" (i_per_page),
+ "[d_phys_page]" (d_phys_page),
+ "[i_phys_page]" (i_phys_page)
+
+ /* Clobbers */
+ : "memory", "c"
+ );
+}
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+#ifdef CONFIG_PPC64
+/*
+ * Data cache flush that works on non-mapped physical addresses.
+ * Use only for non-LPAR setups ! It also assumes real mode
+ * is cacheable. Used for flushing out the DART before using
+ * it as uncacheable memory
+ */
+void flush_dcache_phys_range(unsigned long start, unsigned long stop)
+{
+ /* System data cache block size */
+ unsigned long bytes = powerpc_caches.dcache_block_bytes;
+ unsigned long shift = powerpc_caches.dcache_block_shift;
+
+ /* Temporary registers for the ASM to use */
+ unsigned long old_msr, tmp_msr;
+
+ /* Compute a start address and number of cachelines */
+ unsigned long phys_addr = start & ~(bytes - 1);
+ unsigned long nr_lines = ((stop - phys_addr) + (bytes - 1)) >> shift;
+
+ /*
+ * This part needs to be 100% ASM because we disable the MMU, and we
+ * can't accidentally let some C code go poking at memory while the
+ * MMU isn't enabled.
+ *
+ * NOTE: This looks blatantly unsafe with respect to interrupts.
+ * Hopefully all the callers provide sufficient protection?
+ */
+ asm volatile(
+ /* First disable the MMU */
+ "mfmsr %[old_msr]\n\t"
+ "rlwinm %[tmp_msr], %[old_msr], 0, 28, 26\n\t"
+ "mtmsr %[tmp_msr]\n\t"
+ "isync\n\t"
+
+ /* Clean the data cache */
+ "mtctr %[nr_lines]\n"
+ "0: dcbst 0, %[phys_addr]\n\t"
+ "add %[phys_addr], %[phys_addr], %[bytes]\n\t"
+ "bdnz 0b\n\t"
+ "sync\n\t"
+ "isync\n\t"
+
+ /* Finally, re-enable the MMU */
+ "mtmsr %[old_msr]\n\t"
+ "sync\n\t"
+ "isync\n\t"
+
+ /* Temporary variables and inputs */
+ : [old_msr] "=&r" (old_msr),
+ [tmp_msr] "=&r" (tmp_msr),
+ [phys_addr] "=b" (phys_addr)
+
+ /* Inputs */
+ : [bytes] "b" (bytes),
+ [nr_lines] "b" (nr_lines),
+ "[phys_addr]" (phys_addr)
+
+ /* Clobbers */
+ : "memory", "c"
+ );
+}
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 329be36..3823f64 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -328,7 +328,7 @@ void __dma_sync(void *vaddr, size_t size, int direction)
* invalidate only when cache-line aligned otherwise there is
* the potential for discarding uncommitted data from the cache
*/
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ if ((start | size) & (powerpc_caches.dcache_block_bytes - 1))
flush_dcache_range(start, end);
else
invalidate_dcache_range(start, end);
diff --git a/arch/powerpc/platforms/52xx/lite5200_sleep.S b/arch/powerpc/platforms/52xx/lite5200_sleep.S
index 08ab6fe..ac285d9 100644
--- a/arch/powerpc/platforms/52xx/lite5200_sleep.S
+++ b/arch/powerpc/platforms/52xx/lite5200_sleep.S
@@ -394,11 +394,16 @@ restore_regs:
/* cache flushing code. copied from arch/ppc/boot/util.S */
-#define NUM_CACHE_LINES (128*8)
+#define NUM_CACHE_LINES ((128 * 8) << (L1_CACHE_SHIFT_MAX - L1_CACHE_SHIFT_MIN))
/*
* Flush data cache
* Do this by just reading lots of stuff into the cache.
+ *
+ * NOTE: This does not handle variable-sized cachelines properly, but since
+ * we are just trying to flush the data cache by reading lots of data,
+ * this works anyways. We just make sure we read as many cachelines
+ * as we could possibly need to overflow the cache on any hardware.
*/
flush_data_cache:
lis r3,CONFIG_KERNEL_START at h
@@ -407,6 +412,6 @@ flush_data_cache:
mtctr r4
1:
lwz r4,0(r3)
- addi r3,r3,L1_CACHE_BYTES /* Next line, please */
+ addi r3,r3,L1_CACHE_BYTES_MIN /* Next line, please */
bdnz 1b
blr
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 31a7d3a..8503e38 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1135,7 +1135,7 @@ int pmac_pci_enable_device_hook(struct pci_dev *dev)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- L1_CACHE_BYTES >> 2);
+ powerpc_caches.dcache_block_bytes >> 2);
}
return 0;
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 03a217a..c537d49 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -26,6 +26,7 @@
#include <asm/ptrace.h>
#include <asm/string.h>
+#include <asm/cache.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
@@ -254,16 +255,6 @@ static inline void store_inst(void *p)
asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
}
-static inline void cflush(void *p)
-{
- asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
-}
-
-static inline void cinval(void *p)
-{
- asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
-}
-
/*
* Disable surveillance (the service processor watchdog function)
* while we are in xmon.
@@ -1513,10 +1504,9 @@ static void prregs(struct pt_regs *fp)
static void cacheflush(void)
{
- int cmd;
- unsigned long nflush;
+ unsigned long nflush, i;
- cmd = inchar();
+ int cmd = inchar();
if (cmd != 'i')
termch = cmd;
scanhex((void *)&adrs);
@@ -1524,23 +1514,30 @@ static void cacheflush(void)
termch = 0;
nflush = 1;
scanhex(&nflush);
- nflush = (nflush + L1_CACHE_BYTES - 1) / L1_CACHE_BYTES;
- if (setjmp(bus_error_jmp) == 0) {
- catch_memory_errors = 1;
- sync();
- if (cmd != 'i') {
- for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
- cflush((void *) adrs);
- } else {
- for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
- cinval((void *) adrs);
- }
- sync();
- /* wait a little while to see if we get a machine check */
- __delay(200);
+ if (setjmp(bus_error_jmp) != 0) {
+ catch_memory_errors = 0;
+ return;
}
- catch_memory_errors = 0;
+ catch_memory_errors = 1;
+ sync();
+
+ /* First flush/invalidate data caches */
+ if (cmd != 'i') {
+ FOR_EACH_CACHELINE(i, adrs, adrs + nflush, dcache)
+ dcbf(i);
+ } else {
+ FOR_EACH_CACHELINE(i, adrs, adrs + nflush, dcache)
+ dcbi(i);
+ }
+
+ /* Now invalidate instruction caches */
+ FOR_EACH_CACHELINE(i, adrs, adrs + nflush, icache)
+ icbi(i);
+
+ sync();
+ /* wait a little while to see if we get a machine check */
+ __delay(200);
}
static unsigned long
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index 116a49c..04ead15 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -136,7 +136,9 @@ static void smu_start_cmd(void)
/* Flush command and data to RAM */
faddr = (unsigned long)smu->cmd_buf;
fend = faddr + smu->cmd_buf->length + 2;
- flush_inval_dcache_range(faddr, fend);
+ flush_dcache_range(faddr, fend);
+ mb();
+ isync();
/* We also disable NAP mode for the duration of the command
@@ -198,7 +200,9 @@ static irqreturn_t smu_db_intr(int irq, void *arg)
* reply length (it's only 2 cache lines anyway)
*/
faddr = (unsigned long)smu->cmd_buf;
- flush_inval_dcache_range(faddr, faddr + 256);
+ flush_dcache_range(faddr, faddr + 256);
+ mb();
+ isync();
/* Now check ack */
ack = (~cmd->cmd) & 0xff;
--
1.7.2.5
More information about the devicetree-discuss
mailing list