[PATCHv6_input/next 4/5] input/cma3000_d0x: Add CMA3000 spi support
Shubhrajyoti
shubhrajyoti at ti.com
Thu Nov 10 20:57:55 EST 2011
Hi Ricardo,
On Thursday 10 November 2011 03:07 AM, Ricardo Ribalda Delgado wrote:
> Add support for SPI communication.
>
> v5: Fixes suggested by Grant Likely
> -Drop .bus line
> -Code Style
> -Use of_device_id table
>
> v4: Add ACKs to patch
>
> v3: Fixes suggested by Jonathan Cameron
> -Separate write/read commands
> -Do not check 1/0 mask
> -Use spi_w8r8 and spi_write_then_read functions
>
> v2: Fixes suggested by Jonathan Cameron
> -Add filename to based on header
> -Rename set with write
> -Set spi buffers as cache aligned
> -Code Style
>
> Acked-by: Jonathan Cameron <jic23 at cam.ac.uk>
> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at gmail.com>
> ---
> drivers/input/misc/Kconfig | 14 +++-
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/cma3000_d0x_spi.c | 153 ++++++++++++++++++++++++++++++++++
> 3 files changed, 166 insertions(+), 2 deletions(-)
> create mode 100644 drivers/input/misc/cma3000_d0x_spi.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index a1aa35a..39f4374 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -519,8 +519,8 @@ config INPUT_CMA3000
> Say Y here if you want to use VTI CMA3000_D0x Accelerometer
> driver
>
> - This driver currently only supports I2C interface to the
> - controller. Also select the I2C method.
> + This driver supports I2C and SPI interface to the
> + controller. Also select the I2C method and/or the SPI method.
>
> If unsure, say N
>
> @@ -537,6 +537,16 @@ config INPUT_CMA3000_I2C
> To compile this driver as a module, choose M here: the
> module will be called cma3000_d0x_i2c.
>
> +config INPUT_CMA3000_SPI
> + tristate "Support SPI bus connection"
> + depends on INPUT_CMA3000 && SPI
> + help
> + Say Y here if you want to use VTI CMA3000_D0x Accelerometer
> + through SPI interface.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called cma3000_d0x_spi.
> +
> config INPUT_XEN_KBDDEV_FRONTEND
> tristate "Xen virtual keyboard and mouse support"
> depends on XEN_FBDEV_FRONTEND
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 53a8d0f..fb05beb 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_BMA150) += bma150.o
> obj-$(CONFIG_INPUT_CM109) += cm109.o
> obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
> obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
> +obj-$(CONFIG_INPUT_CMA3000_SPI) += cma3000_d0x_spi.o
> obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> diff --git a/drivers/input/misc/cma3000_d0x_spi.c b/drivers/input/misc/cma3000_d0x_spi.c
> new file mode 100644
> index 0000000..ab61861
> --- /dev/null
> +++ b/drivers/input/misc/cma3000_d0x_spi.c
> @@ -0,0 +1,153 @@
> +/*
> + * Implements SPI interface for VTI CMA300_D0x Accelerometer driver
> + *
> + * Copyright (C) 2011 Qtechnology
> + * Author: Ricardo Ribalda <ricardo.ribalda at gmail.com.com>
> + * Based on:
> + * drivers/input/misc/cma3000_d0x_i2c.c by Hemanth V
> + * drivers/input/mis/adxl34x-spi.c by Michael Hennerich
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/input/cma3000.h>
> +#include "cma3000_d0x.h"
> +
> +static int cma3000_spi_write(struct device *dev, u8 reg, u8 val, char *msg)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + int ret;
> + u8 tmp[2];
> +
> + tmp[0] = (reg << 2) | 2;
> + tmp[1] = val;
> +
> + ret = spi_write_then_read(spi, tmp, sizeof(tmp), NULL, 0);
> + if (ret < 0) {
> + dev_err(dev, "%s failed (%s, %d)\n", __func__, msg, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int cma3000_spi_read(struct device *dev, u8 reg, char *msg)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + int ret;
> +
> + ret = spi_w8r8(spi, reg << 2);
> + if (ret < 0)
> + dev_err(dev, "%s failed (%s, %d)\n", __func__, msg, ret);
> +
> + return ret;
> +}
> +
> +static const struct cma3000_bus_ops cma3000_spi_bops = {
> + .bustype = BUS_SPI,
> +#define CMA3000_BUSSPI (1 << 4)
> + .ctrl_mod = CMA3000_BUSSPI,
> + .read = cma3000_spi_read,
> + .write = cma3000_spi_write,
> +};
> +
> +static int __devinit cma3000_spi_probe(struct spi_device *spi)
> +{
> + struct cma3000_accl_data *data;
> +
> + data = cma3000_init(&spi->dev, spi->irq, &cma3000_spi_bops);
> + if (IS_ERR(data))
> + return PTR_ERR(data);
Maybe PTR_RET ?
Just a suggestion.
> +
> + spi_set_drvdata(spi, data);
> +
> + return 0;
> +}
> +
> +static int __devexit cma3000_spi_remove(struct spi_device *spi)
> +{
> + struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
> +
> + cma3000_exit(data);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int cma3000_spi_suspend(struct device *dev)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
> +
> + cma3000_suspend(data);
> +
> + return 0;
> +}
> +
> +static int cma3000_spi_resume(struct device *dev)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + struct cma3000_accl_data *data = dev_get_drvdata(&spi->dev);
> +
> + cma3000_resume(data);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops cma3000_spi_pm_ops = {
> + .suspend = cma3000_spi_suspend,
> + .resume = cma3000_spi_resume,
> +};
> +
> +static SIMPLE_DEV_PM_OPS(cma3000_spi_pm, cma3000_spi_suspend,
> + cma3000_spi_resume);
> +#endif
> +
> +static const struct of_device_id cma3000_spi_dt_ids[] = {
> + { .compatible = "vti,cma3000_d01", },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, cma3000_spi_dt_ids);
> +
> +static struct spi_driver cma3000_driver = {
> + .driver = {
> + .name = "cma3000_d01",
> + .owner = THIS_MODULE,
> + .of_match_table = cma3000_spi_dt_ids,
> +#ifdef CONFIG_PM
> + .pm = &cma3000_spi_pm,
> +#endif
> + },
> + .probe = cma3000_spi_probe,
> + .remove = __devexit_p(cma3000_spi_remove),
> +};
> +
> +static int __init cma3000_spi_init(void)
> +{
> + return spi_register_driver(&cma3000_driver);
> +}
> +module_init(cma3000_spi_init);
> +
> +static void __exit cma3000_spi_exit(void)
> +{
> + spi_unregister_driver(&cma3000_driver);
> +}
> +module_exit(cma3000_spi_exit);
> +
> +MODULE_DESCRIPTION("CMA3000-D0x Accelerometer SPI Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda at gmail.com>");
More information about the devicetree-discuss
mailing list