[PATCH v2 0/4] Versatile Express DT support

Rob Herring robherring2 at gmail.com
Tue Nov 29 01:25:12 EST 2011


On 11/23/2011 09:01 AM, Pawel Moll wrote:
> Hello again,
> 
> This version of the series (hopefully) addresses all the suggestions
> made by Dave, Rob and Russell.
> 
> The compatible values are specific for the tiles now and the memory
> map variant is defined as a custom property in the motherboard node.
> 
> Tested on V2P-CA9 coretile both with ATAGs and DT and V2P-CA5s with DT.
> 
> All comments, as always, welcomed!
> 
> Pawel
> 
> 
> 
> Pawel Moll (4):
>   ARM: vexpress: Get rid of MMIO_P2V
>   ARM: vexpress: Add DT support in v2m
>   ARM: vexpress: Initial RS1 memory map support
>   ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4
> 
>  Documentation/devicetree/bindings/arm/vexpress    |  101 ++++++++
>  arch/arm/boot/dts/vexpress-v2m-rs1.dtsi           |  192 +++++++++++++++
>  arch/arm/boot/dts/vexpress-v2m.dtsi               |  191 +++++++++++++++
>  arch/arm/boot/dts/vexpress-v2p-ca5s.dts           |  132 ++++++++++
>  arch/arm/boot/dts/vexpress-v2p-ca9.dts            |  146 +++++++++++
>  arch/arm/include/asm/hardware/arm_timer.h         |    5 +
>  arch/arm/mach-vexpress/Kconfig                    |   35 +++
>  arch/arm/mach-vexpress/Makefile                   |    1 +
>  arch/arm/mach-vexpress/Makefile.boot              |    6 +
>  arch/arm/mach-vexpress/core.h                     |   21 ++-
>  arch/arm/mach-vexpress/ct-ca9x4.c                 |   52 +---
>  arch/arm/mach-vexpress/include/mach/ct-ca9x4.h    |   13 +-
>  arch/arm/mach-vexpress/include/mach/debug-macro.S |   37 +++-
>  arch/arm/mach-vexpress/include/mach/motherboard.h |   58 +++--
>  arch/arm/mach-vexpress/include/mach/uncompress.h  |   13 +-
>  arch/arm/mach-vexpress/platsmp.c                  |    4 +-
>  arch/arm/mach-vexpress/v2m.c                      |  265 ++++++++++++++++++---
>  arch/arm/mach-vexpress/v2p-ca5s_ca9.c             |  115 +++++++++
>  18 files changed, 1272 insertions(+), 115 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/vexpress
>  create mode 100644 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
>  create mode 100644 arch/arm/boot/dts/vexpress-v2m.dtsi
>  create mode 100644 arch/arm/boot/dts/vexpress-v2p-ca5s.dts
>  create mode 100644 arch/arm/boot/dts/vexpress-v2p-ca9.dts
>  create mode 100644 arch/arm/mach-vexpress/v2p-ca5s_ca9.c

Other than Dave's comments, looks good. For the series:

Acked-by: Rob Herring <rob.herring at calxeda.com>

There are a number of compatible strings for various peripherals defined
without documentation, but you're not really using them so I think it's
fine for now. BTW, I believe Dave said he was going to document some of
the primecell peripherals. :)

Rob


More information about the devicetree-discuss mailing list