[RFC PATCH 1/3] arm/imx6: describe clocks in device tree source

[Sascha Hauer]

On Thu, Nov 24, 2011 at 12:01:29PM +0800, Shawn Guo wrote:
> On Tue, Nov 22, 2011 at 09:56:49AM +0100, Sascha Hauer wrote:
> > On Tue, Nov 22, 2011 at 09:48:54AM +0800, Shawn Guo wrote:
> > > It adds document for imx clock device tree bindings and then describes
> > > imx6 clocks in dts.
> > > 
> > > +
> > > +		ecspi_root_clk: ecspi-root {
> > > +			compatible = "fsl,imx6q-clock";
> > > +			#clock-cells = <1>;
> > > +			imx,clock-divider = <0x38 0 0 19 6>;
> > > +			clock-input = <&pll3_div_clk 2 0 0>;
> > > +			clock-input-name = "pll3-60m";
> > > +			clock-output-name = "ecspi-root";
> > > +		};
> > 
> > I'm not sure you do yourself a favour if you skip all the muxes and
> > assume reset default for them. The ecspi-root parent is a mux The mux
> > seems to be missing in the can clock, uart and probably others.
> > 
> I'm looking at IMX6DQRM.pdf 'Rev. B, 07/2011'.  I do not see mux for
> ECSPI_CLK_ROOT as well as other clocks you mentioned.  Instead, I can
> only see divider for these clocks.  Can you point out the registers
> and bits of these muxes you are seeing with these clocks?

No, I can't find them either ;) I must have looked into the wrong manual
at that moment. Sorry for the noise.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |