[PATCH] Initial DT support for SIMpad devices.
Jochen Friedrich
jochen at scram.de
Mon Nov 21 07:37:50 EST 2011
Signed-off-by: Jochen Friedrich <jochen at scram.de>
---
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/sa1110.dtsi | 72 ++++++++++++++++++++
arch/arm/boot/dts/simpad.dts | 49 +++++++++++++
arch/arm/mach-sa1100/Kconfig | 13 ++++
arch/arm/mach-sa1100/Makefile.boot | 1 +
arch/arm/mach-sa1100/simpad.c | 29 ++++++++-
6 files changed, 164 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/sa1110.dtsi
create mode 100644 arch/arm/boot/dts/simpad.dts
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 5b14518..cbe7046 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -34,6 +34,7 @@ qcom Qualcomm, Inc.
ramtron Ramtron International
samsung Samsung Semiconductor
schindler Schindler
+siemens SIEMENS
simtek
sirf SiRF Technology, Inc.
stericsson ST-Ericsson
diff --git a/arch/arm/boot/dts/sa1110.dtsi b/arch/arm/boot/dts/sa1110.dtsi
new file mode 100644
index 0000000..e1ca379
--- /dev/null
+++ b/arch/arm/boot/dts/sa1110.dtsi
@@ -0,0 +1,72 @@
+/*
+ * sa1110.dtsi - Device Tree Include file for Intel SA1110 SoC
+ *
+ * Copyright (C) 2011 Jochen Friedrich <jochen at scram.de>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Intel SA1110 SoC";
+ compatible = "intel,sa1110";
+ interrupt-parent = <&aic>;
+
+ cpus {
+ cpu at 0 {
+ compatible = "intel,sa1110";
+ };
+ };
+
+ localbus {
+ compatible = "intel,sa1110-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <
+ 0x0 0x0 0x00000000 0x08000000
+ 0x1 0x0 0x08000000 0x08000000
+ 0x2 0x0 0x10000000 0x08000000
+ 0x3 0x0 0x18000000 0x08000000
+ 0x4 0x0 0x40000000 0x08000000
+ 0x5 0x0 0x48000000 0x08000000
+ >;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart0: serial at 0x80010000 {
+ compatible = "intel,sa1100-uart";
+ reg = <0x80010000 0x24>;
+ interrupts = <15>;
+ status = "disabled";
+ };
+
+ uart1: serial at 0x80030000 {
+ compatible = "intel,sa1100-uart";
+ reg = <0x80030000 0x24>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ uart2: serial at 0x80050000 {
+ compatible = "intel,sa1100-uart";
+ reg = <0x80050000 0x24>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ aic: interrupt-controller at 0x90050000 {
+ compatible = "intel,sa1110-icr";
+ reg = <0x90050000 0x24>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/simpad.dts b/arch/arm/boot/dts/simpad.dts
new file mode 100644
index 0000000..fdd7969
--- /dev/null
+++ b/arch/arm/boot/dts/simpad.dts
@@ -0,0 +1,49 @@
+/dts-v1/;
+/include/ "sa1110.dtsi"
+
+/ {
+ model = "SIEMENS, SIMpad";
+ compatible = "siemens,simpad";
+
+ aliases {
+ serial0 = &uart2;
+ serial1 = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySA0";
+ };
+
+ localbus {
+ flash at 0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+
+ flash at 1,0 {
+ compatible = "cfi-flash";
+ reg = <1 0 0x08000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+ };
+
+ soc {
+ uart0: serial at 0x80010000 {
+ status = "okay";
+ };
+
+ uart2: serial at 0x80050000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 42625e4..31238c3 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -157,6 +157,19 @@ config SA1100_SIMPAD
like CL4 in additional it has a PCMCIA-Slot. For more information
visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
+config SA1100_SIMPAD_DT
+ bool "Simpad with device tree support"
+ select CPU_FREQ_SA1110
+ select SA1100_SIMPAD
+ select USE_OF
+ help
+ The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
+ are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
+ FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
+ PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
+ like CL4 in additional it has a PCMCIA-Slot. For more information
+ visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
+
config SA1100_SSP
tristate "Generic PIO SSP"
help
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
index 5a616f6..1d17767 100644
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ b/arch/arm/mach-sa1100/Makefile.boot
@@ -6,3 +6,4 @@ endif
params_phys-y := 0xc0000100
initrd_phys-y := 0xc0800000
+dtb-$(CONFIG_SA1100_SIMPAD_DT) += simpad.dtb
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index d3c9d2b..9d6f663 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -10,6 +10,7 @@
#include <linux/string.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
@@ -211,8 +212,9 @@ static void __init simpad_map_io(void)
sa1100_register_uart_fns(&simpad_port_fns);
sa1100_register_uart(0, 3); /* serial interface */
+#ifndef CONFIG_OF
sa1100_register_uart(1, 1); /* DECT */
-
+#endif
// Reassign UART 1 pins
GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
@@ -392,6 +394,31 @@ static int __init simpad_init(void)
arch_initcall(simpad_init);
+#ifdef CONFIG_OF
+const struct of_device_id simpad_bus_match_table[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "intel,sa1110-localbus", },
+ {} /* Empty terminated list */
+};
+
+static void __init simpad_dt_device_init(void)
+{
+ of_platform_populate(NULL, simpad_bus_match_table, NULL, NULL);
+}
+
+static const char *simpad_dt_board_compat[] __initdata = {
+ "siemens,simpad",
+ NULL
+};
+
+DT_MACHINE_START(simpad_dt, "SIMpad")
+ .timer = &sa1100_timer,
+ .map_io = simpad_map_io,
+ .init_irq = sa1100_init_irq,
+ .init_machine = simpad_dt_device_init,
+ .dt_compat = simpad_dt_board_compat,
+MACHINE_END
+#endif
MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
--
1.7.7.3
More information about the devicetree-discuss
mailing list