[PATCH] distclean: Remove generated .dtb files

Grant Likely grant.likely at secretlab.ca
Mon Nov 7 05:42:54 EST 2011


On Sun, Nov 6, 2011 at 11:38 AM, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote:
>> The patch 'arm/dt: Add dtb make rule' adds support to
>> create a .dtb file. But this is never removed afterwards.
>> Remove the generated .dtb file if 'distclean' is called.
>>
>> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
>> CC: Rob Herring <rob.herring at calxeda.com>
>> CC: Shawn Guo <shawn.guo at freescale.com>
>> CC: Jason Liu <jason.hui at linaro.org>
>> CC: Grant Likely <grant.likely at secretlab.ca>
>
> Acked-by: Grant Likely <grant.likely at secretlab.ca>

... although why are only the .dtb files needed in the clean list?
How are the other built files cleaned?  'make clean' does remove the
other images, but I don't know what the mechanism is.

g.

>
>> ---
>>  arch/arm/boot/Makefile |    2 ++
>>  1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
>> index 1cd9b0a..08f0d35 100644
>> --- a/arch/arm/boot/Makefile
>> +++ b/arch/arm/boot/Makefile
>> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
>>
>>  $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
>>
>> +clean-files := *.dtb
>> +
>>  quiet_cmd_uimage = UIMAGE  $@
>>        cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
>>                  -C none -a $(LOADADDR) -e $(STARTADDR) \
>> --
>> 1.7.0.4
>>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.


More information about the devicetree-discuss mailing list