[PATCHv4 03/13] ARM: vic: MULTI_IRQ_HANDLER handler
Jamie Iles
jamie at jamieiles.com
Fri Nov 4 12:10:00 EST 2011
Add a handler for the VIC that is suitable for MULTI_IRQ_HANDLER
platforms. This can replace the ASM entry macros for platforms that use
the VIC.
v4: - rebase ontop of move __exception and friends to
asm/exception.h
- rework polling loop to handle as many irqs as possible in one go
v3: - simplify irq handling loop as suggested by Grant
- service interrupts from msb->lsb order
v2: - allow the handler be used for !CONFIG_OF
- use irq_domain_to_irq()
Cc: Rob Herring <robherring2 at gmail.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
Signed-off-by: Jamie Iles <jamie at jamieiles.com>
---
arch/arm/common/vic.c | 38 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/hardware/vic.h | 3 ++
2 files changed, 41 insertions(+), 0 deletions(-)
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index e689975..a82e3e0 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -30,6 +30,7 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
@@ -427,3 +428,40 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
return -EIO;
}
#endif /* CONFIG OF */
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Handle each interrupt in a single VIC. Returns non-zero if we've
+ * handled at least one interrupt. This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+ u32 stat, irq;
+ int handled = 0;
+
+ stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+ while (stat) {
+ irq = ffs(stat) - 1;
+ handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+ stat &= ~(1 << irq);
+ handled = 1;
+ }
+
+ return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+ int i, handled;
+
+ do {
+ for (i = 0, handled = 0; i < vic_id; ++i)
+ handled |= handle_one_vic(&vic_devices[i], regs);
+ } while (handled);
+}
+#endif /* CONFIG_MULTI_IRQ_HANDLER */
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
index b348a54..f42ebd6 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -45,8 +45,11 @@
#include <linux/types.h>
struct device_node;
+struct pt_regs;
+
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
int vic_of_init(struct device_node *node, struct device_node *parent);
+void vic_handle_irq(struct pt_regs *regs);
#endif /* __ASSEMBLY__ */
#endif
--
1.7.5.4
More information about the devicetree-discuss
mailing list