[PATCH 2/4] powerpc/p1022ds: fix broken mpic timer node
Scott Wood
scottwood at freescale.com
Fri Mar 25 08:43:52 EST 2011
There is no hardware interrupt 0xf7. But now we can express the timer
interrupt using 4-cell interrupts. This requires converting all of the
other interrupt specifiers in the tree as well.
Also add the second timer group, and fix the reg property to only
describe the timer registers.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
arch/powerpc/boot/dts/p1022ds.dts | 106 ++++++++++++++++++++----------------
1 files changed, 59 insertions(+), 47 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 59ef405..4f685a7 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -52,7 +52,7 @@
#size-cells = <1>;
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
+ interrupts = <19 2 0 0>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -157,7 +157,7 @@
* IRQ8 is generated if the "EVENT" switch is pressed
* and PX_CTL[EVESEL] is set to 00.
*/
- interrupts = <8 8>;
+ interrupts = <8 8 0 0>;
};
};
@@ -178,13 +178,13 @@
ecm at 1000 {
compatible = "fsl,p1022-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
memory-controller at 2000 {
compatible = "fsl,p1022-memory-controller";
reg = <0x2000 0x1000>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
i2c at 3000 {
@@ -193,7 +193,7 @@
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <43 2>;
+ interrupts = <43 2 0 0>;
dfsrr;
};
@@ -203,7 +203,7 @@
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
- interrupts = <43 2>;
+ interrupts = <43 2 0 0>;
dfsrr;
wm8776:codec at 1a {
@@ -220,7 +220,7 @@
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
+ interrupts = <42 2 0 0>;
};
serial1: serial at 4600 {
@@ -229,7 +229,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <42 2>;
+ interrupts = <42 2 0 0>;
};
spi at 7000 {
@@ -238,7 +238,7 @@
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
+ interrupts = <59 0x2 0 0>;
espi,num-ss-bits = <4>;
mode = "cpu";
@@ -275,7 +275,7 @@
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
reg = <0x15000 0x100>;
- interrupts = <75 2>;
+ interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
fsl,playback-dma = <&dma00>;
@@ -294,25 +294,25 @@
compatible = "fsl,ssi-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupts = <76 2>;
+ interrupts = <76 2 0 0>;
};
dma01: dma-channel at 80 {
compatible = "fsl,ssi-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupts = <77 2>;
+ interrupts = <77 2 0 0>;
};
dma-channel at 100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupts = <78 2>;
+ interrupts = <78 2 0 0>;
};
dma-channel at 180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupts = <79 2>;
+ interrupts = <79 2 0 0>;
};
};
@@ -320,7 +320,7 @@
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
+ interrupts = <47 0x2 0 0>;
gpio-controller;
};
@@ -329,7 +329,7 @@
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
};
dma at 21300 {
@@ -343,25 +343,25 @@
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
- interrupts = <20 2>;
+ interrupts = <20 2 0 0>;
};
dma-channel at 80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
- interrupts = <21 2>;
+ interrupts = <21 2 0 0>;
};
dma-channel at 100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
- interrupts = <22 2>;
+ interrupts = <22 2 0 0>;
};
dma-channel at 180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
- interrupts = <23 2>;
+ interrupts = <23 2 0 0>;
};
};
@@ -370,7 +370,7 @@
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
- interrupts = <28 0x2>;
+ interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
@@ -381,11 +381,11 @@
reg = <0x24000 0x1000 0xb0030 0x4>;
phy0: ethernet-phy at 0 {
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy at 1 {
- interrupts = <9 1>;
+ interrupts = <9 1 0 0>;
reg = <0x2>;
};
};
@@ -416,13 +416,13 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
};
queue-group at 1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
};
};
@@ -443,20 +443,20 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
};
queue-group at 1{
#address-cells = <1>;
#size-cells = <1>;
reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
};
};
sdhci at 2e000 {
compatible = "fsl,p1022-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
+ interrupts = <72 0x2 0 0>;
fsl,sdhci-auto-cmd12;
/* Filled in by U-Boot */
clock-frequency = <0>;
@@ -467,7 +467,7 @@
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
"fsl,sec2.0";
reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
+ interrupts = <45 2 0 0 58 2 0 0>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x97c>;
@@ -478,14 +478,14 @@
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x18000 0x1000>;
cell-index = <1>;
- interrupts = <74 0x2>;
+ interrupts = <74 0x2 0 0>;
};
sata at 19000 {
compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
reg = <0x19000 0x1000>;
cell-index = <2>;
- interrupts = <41 0x2>;
+ interrupts = <41 0x2 0 0>;
};
power at e0070{
@@ -496,21 +496,33 @@
display at 10000 {
compatible = "fsl,diu", "fsl,p1022-diu";
reg = <0x10000 1000>;
- interrupts = <64 2>;
+ interrupts = <64 2 0 0>;
};
timer at 41100 {
compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x204>;
- interrupts = <0xf7 0x2>;
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+ };
+
+ timer at 42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
};
mpic: pic at 40000 {
interrupt-controller;
#address-cells = <0>;
- #interrupt-cells = <2>;
+ #interrupt-cells = <4>;
reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
+ compatible = "fsl,mpic";
device_type = "open-pic";
};
@@ -519,14 +531,14 @@
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities at e0000 { //global utilities block
@@ -547,7 +559,7 @@
ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -582,7 +594,7 @@
ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
@@ -618,7 +630,7 @@
ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
clock-frequency = <33333333>;
- interrupts = <16 2>;
+ interrupts = <16 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
--
1.7.1
More information about the devicetree-discuss
mailing list