[PATCH v6 6/6] powerpc, tqm5200: update tqm5200_defconfig to fit for charon board.

Heiko Schocher hs at denx.de
Tue Mar 22 19:27:32 EST 2011


added:

CONFIG_MTD_OF_PARTS
CONFIG_MTD_PLATRAM
CONFIG_FIXED_PHY
CONFIG_SENSORS_LM80
CONFIG_MFD_SM501
CONFIG_FB
CONFIG_FB_FOREIGN_ENDIAN
CONFIG_FB_SM501
CONFIG_FRAMEBUFFER_CONSOLE
CONFIG_RTC_DRV_DS1374

Signed-off-by: Heiko Schocher <hs at denx.de>
cc: Wolfram Sang <w.sang at pengutronix.de>
cc: Grant Likely <grant.likely at secretlab.ca>
cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
cc: linux-fbdev at vger.kernel.org
cc: devicetree-discuss at ozlabs.org
cc: Ben Dooks <ben at simtec.co.uk>
cc: Vincent Sanders <vince at simtec.co.uk>
cc: Samuel Ortiz <sameo at linux.intel.com>
cc: linux-kernel at vger.kernel.org
cc: Randy Dunlap <rdunlap at xenotime.net>
cc: Wolfgang Denk <wd at denx.de>
cc: Paul Mundt <lethal at linux-sh.org>
---
- changes since v1:
  added Grant Likely to cc
- changes for v6:
  - new in this version, therefore patch
    "powerpc, mpc5200: update mpc5200_defconfig to fit for charon board."
    removed.
    As this board is tqm5200 based, added necessary changes
    to the tqm5200_defconfig. In previous patchserie I added
    the changes to mpc5200_defconfig, as Wolfram Sang mentioned,
    but as tqm5200_defconfig is in mainline, and the board is
    tqm5200 based, I think, thats the appropriate place, as
    new defconfigs are not accepted. Paul, before applying
    this patch series, this patch should get an Acked by
    from a powerpc maintainer...
  - repost the complete patchserie as Paul Mundt suggested

 arch/powerpc/configs/52xx/tqm5200_defconfig |   20 ++++++++++++--------
 1 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 959cd2c..716a37b 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,9 +1,10 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
+CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
 # CONFIG_EPOLL is not set
@@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -38,17 +38,18 @@ CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_ATA=y
@@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_SENSORS_LM80=y
 CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.4



More information about the devicetree-discuss mailing list