[PATCH V5 0/4] Add MX51 basic DT support
Jason Liu
jason.hui at linaro.org
Thu Mar 17 02:51:37 EST 2011
From: Jason Liu <r64343 at freescale.com>
This patchset adds Freescale i.mx51 device tree support.
This is based on
git://git.secretlab.ca/git/linux-2.6 devicetree/test
This patch has been tested on MX51 babbage board and can
boot up succesfully to linux console with DT enabled.
Grant, I think it's almost ready for you to merge it.
V5:
- Add bidings for uart and fec
- resolve s-o-b issue
- move dt clock part to seperate file
V4:
- Add Linaro sign off and copyrightt
V3:
- prefix the property name with the vendor name as like:
"fsl,has-rts-cts" and "fsl,irda-mode"
- use the ttymxc0 as the console
- add FEC support, nfs can be used now
Jason Liu (4):
arm/dt: add basic mx51 device tree support
arm/dt: add very basic dts file for babbage board
serial/imx: parse from device tree support
net/fec: add device tree matching support
.../devicetree/bindings/net/fsl-imx-fec.txt | 17 +++
.../bindings/tty/serial/fsl-imx-uart.txt | 19 +++
arch/arm/boot/dts/babbage.dts | 122 ++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 8 ++
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/board-dt.c | 64 ++++++++++
arch/arm/mach-mx5/clock-dt.c | 52 +++++++++
arch/arm/plat-mxc/include/mach/common.h | 1 +
drivers/net/fec.c | 17 +++
drivers/tty/serial/imx.c | 78 +++++++++++--
10 files changed, 369 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/fsl-imx-fec.txt
create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
create mode 100644 arch/arm/boot/dts/babbage.dts
create mode 100644 arch/arm/mach-mx5/board-dt.c
create mode 100644 arch/arm/mach-mx5/clock-dt.c
More information about the devicetree-discuss
mailing list