[PATCH 3/5] arm/dt: mx51: dynamically add clocks per dt nodes
Grant Likely
grant.likely at secretlab.ca
Tue Mar 15 18:48:08 EST 2011
On Mon, Mar 14, 2011 at 09:18:40PM +0800, Shawn Guo wrote:
> This patch is to change the static clock creating and registering to
> the dynamic way, which scans dt clock nodes, associate clk with
> device_node, and then add them to clkdev accordingly.
>
> It's a pretty straight translation from non-dt clock code to dt one,
> and it does not really change any actual clock code.
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
> arch/arm/mach-mx5/clock-mx51-mx53.c | 1401 ++++++++++++++++++++++++++++++++++-
> 1 files changed, 1387 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
> index dedb7f9..c3ec7f6 100644
> --- a/arch/arm/mach-mx5/clock-mx51-mx53.c
> +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
> @@ -49,6 +49,30 @@ static struct clk emi_fast_clk;
> static struct clk ipu_clk;
> static struct clk mipi_hsc1_clk;
>
> +#ifdef CONFIG_OF
> +/*
> + * The pointers are defined to save the references to the clocks
> + * dynamically created, and then could be used to replace those
> + * static references in non-dt clock code.
> + */
> +static struct clk *osc_clk_dt;
> +static struct clk *pll1_main_clk_dt;
> +static struct clk *pll1_sw_clk_dt;
> +static struct clk *pll2_sw_clk_dt;
> +static struct clk *pll3_sw_clk_dt;
> +static struct clk *lp_apm_clk_dt;
> +static struct clk *periph_apm_clk_dt;
> +static struct clk *main_bus_clk_dt;
> +static struct clk *ipg_clk_dt;
> +static struct clk *ipg_per_clk_dt;
> +static struct clk *cpu_clk_dt;
> +static struct clk *iim_clk_dt;
> +static struct clk *usboh3_clk_dt;
> +static struct clk *usb_phy1_clk_dt;
> +static struct clk *esdhc1_clk_dt;
> +static struct clk *esdhc2_clk_dt;
> +#endif
Heh, yeah this seems sub-optimal. It would be better to share common
clock initialization between dt and non-dt boards, even if it means
that a lot of the clocks are node described in the device tree (at
least for the on-chip SoC clocks; board-accessible clocks still need
to appear in the device tree though.
> +
> #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
>
> /* calculate best pre and post dividers to get the required divider */
> @@ -163,10 +187,18 @@ static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
> return NULL;
> }
>
> +#ifdef CONFIG_OF
> +static void __iomem *dt_mx51_get_pll_base(struct clk *pll);
> +#endif
> +
> static inline void __iomem *_get_pll_base(struct clk *pll)
> {
> if (cpu_is_mx51())
> +#ifdef CONFIG_OF
> + return dt_mx51_get_pll_base(pll);
> +#else
> return _mx51_get_pll_base(pll);
> +#endif
If you do it this way, you need to make sure dt_mx51_get_pll_base()
falls back to _mx51_get_pll_base() when a dt is not provided.
g.
More information about the devicetree-discuss
mailing list