[PATCH V4 2/5] arm/dt: add very basic dts file for babbage board

[Shawn Guo]

Hi Jason,

On Thu, Mar 10, 2011 at 12:59:42PM +0800, Jason Liu wrote:
> Signed-off-by: Jason Liu <jason.hui at linaro.org>
> Signed-off-by: Jason Liu <r64343 at freescale.com>
> Singed-off-by: Rob Herring <robherring2 at gmail.com>
> ---
>  arch/arm/boot/dts/babbage.dts |  122 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 122 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/babbage.dts b/arch/arm/boot/dts/babbage.dts
> new file mode 100644
> index 0000000..ab87a1b
> --- /dev/null
> +++ b/arch/arm/boot/dts/babbage.dts
> @@ -0,0 +1,122 @@
> +/*
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "Freescale i.MX51 Babbage";
> +	compatible = "fsl,mx51-babbage";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	#interrupt-cells = <1>;
> +	interrupt-parent = <&tzic>;
> +
> +	memory {
> +		reg = <0x90000000 0x20000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttymxc0,115200n8 debug earlyprintk ip=dhcp";
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		tzic: tz-interrupt-controller {
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-controller;
> +			reg = <0xe0000000 0x1000>;
> +			compatible = "fsl,imx51-tzic";
> +		};
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		uart0_clk: uart0 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.0";
> +		};
> +
> +		uart1_clk: uart1 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.1";
> +		};
> +
> +		uart2_clk: uart2 {
> +			compatible = "clock";
> +			clock-outputs = "imx-uart.2";
> +		};
> +
> +		fec_clk: fec {
> +			compatible = "clock";
> +			clock-outputs = "fec.0";
> +		};
> +	};
> +
> +	aips at 73f00000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x73f00000 0x100000>;
> +
> +		imx-uart at bc000 {
> +			compatible = "fsl,imx51-uart";
> +			reg = <0xbc000 0x1000>;
> +			interrupts = <0x1f>;
> +			fsl,has-rts-cts;
> +			uart-clock = <&uart0_clk>, "uart";
> +		};
> +
> +		imx-uart at c0000 {
> +			compatible = "fsl,imx51-uart";
> +			reg = <0xc0000 0x1000>;
> +			interrupts = <0x20>;
> +			fsl,has-rts-cts;
> +			uart-clock = <&uart1_clk>, "uart";
> +		};
> +	};
> +
> +	spba at 70000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x70000000 0x100000>;
> +
> +		imx-uart at c000 {
> +			compatible = "fsl,imx51-uart";
> +			reg = <0xc000 0x1000>;
> +			interrupts = <0x21>;
> +			fsl,has-rts-cts;
> +			uart-clock = <&uart2_clk>, "uart";
> +		};
> +	};
> +
Moving spba at 70000000 section after aips at 73f00000 seems a quick fix to
get console=ttymxc0, but not a right fix to me.

I do not find a real example on mx51, but let's make one, saying
there are two instance of one IP block, xyz1 and xyz2, and xyz1 is on
bus spba at 70000000) while xyz2 is on bus apis at 73f00000.  Your fix is
broken here, as you need to put spba at 70000000 after aips at 73f00000 for
uart driver, while xyz driver requires spba at 70000000 stays before
aips at 73f00000. 

Also this quick fix is working for uart, but will not for some others,
for example, eCSPI and SSI, which requires spba at 70000000 even behind
aips at 83f00000 with your solution.

> +	aips at 83f00000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		ranges = <0x0 0x83f00000 0x100000>;
> +
> +		fec at ec000 {
> +			compatible = "fsl,imx-fec";
> +			reg = <0xec000 0x1000>;
> +			interrupts = <0x57>;
> +			fec_clk-clock = <&fec_clk>, "fec";
> +		};
> +	};
> +};

-- 
Regards,
Shawn