[PATCH 1/3] crypto: add device tree bindings for the Freescale SEC4/CAAM
Kim Phillips
kim.phillips at freescale.com
Thu Mar 10 11:54:41 EST 2011
Add SEC4 device tree binding documentation and add a SEC4
device node to the P4080's dts.
Signed-off-by: Steve Cornelius <sec at pobox.com>
Signed-off-by: Kim Phillips <kim.phillips at freescale.com>
---
.../devicetree/bindings/crypto/fsl-sec4.txt | 409 ++++++++++++++++++++
arch/powerpc/boot/dts/p4080ds.dts | 95 +++++-
2 files changed, 503 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
new file mode 100644
index 0000000..fce16a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -0,0 +1,409 @@
+=====================================================================
+SEC 4 Device Tree Binding
+Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+
+ CONTENTS
+ -Overview
+ -SEC 4 Node
+ -Job Ring Node
+ -Run Time Integrity Check (RTIC) Node
+ -Run Time Integrity Check (RTIC) Memory Node
+ -Secure Non-Volatile Storage (SNVS) Node
+ -Full Example
+
+NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+Accelerator and Assurance Module (CAAM).
+
+=====================================================================
+Overview
+
+DESCRIPTION
+
+SEC 4 h/w can process requests from 2 types of sources.
+1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+2. Job Rings (HW interface between cores & SEC 4 registers).
+
+High Speed Data Path Configuration:
+
+HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+such as the P4080. The number of simultaneous dequeues the QI can make is
+equal to the number of Descriptor Controller (DECO) engines in a particular
+SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+dequeue from 5 subportals simultaneously.
+
+Job Ring Data Path Configuration:
+
+Each JR is located on a separate 4k page, they may (or may not) be made visible
+in the memory partition devoted to a particular core. The P4080 has 4 JRs, so
+up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+=====================================================================
+P4080 SEC 4 Node
+
+Description
+
+ Node defines the base address of the SEC 4 block.
+ This block specifies the address range of all global
+ configuration registers for the SEC 4 block. It
+ also receives interrupts from the Run Time Integrity Check
+ (RTIC) function within the SEC 4 block.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,p4080-sec4.0","fsl,sec-4.0"
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC4.0 configuration registers.
+ registers
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 4.0 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+
+EXAMPLE
+ crypto at 300000 {
+ compatible = "fsl,p4080-sec4.0", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+ };
+
+=====================================================================
+P4080 Job Ring (JR) Node
+
+ Child of the crypto node defines data processing interface to SEC 4
+ across the peripheral bus for purposes of processing
+ cryptographic descriptors. The specified address
+ range can be made visible to one (or more) cores.
+ The interrupt defined for this node is controlled within
+ the address range of this node.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,p4080-sec4.0-job-ring","fsl,sec4.0-job-ring"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies a two JR parameters: an offset from
+ the parent physical address and the length the JR registers.
+
+ - fsl,liodn
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the LIODN to be used in conjunction with
+ the ppid-to-liodn table that specifies the PPID to LIODN mapping.
+ Needed if the PAMU is used. Value is a 12 bit value
+ where value is a LIODN ID for this JR. This property is
+ normally set by boot firmware.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+EXAMPLE
+ jr at 1000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ fsl,liodn = <0x081>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+
+=====================================================================
+P4080 Run Time Integrity Check (RTIC) Node
+
+ Child node of the crypto node. Defines a register space that
+ contains up to 5 sets of addresses and their lengths (sizes) that
+ will be checked at run time. After an initial hash result is
+ calculated, these addresses are checked by HW to monitor any
+ change. If any memory is modified, a Security Violation is
+ triggered (see SNVS definition).
+
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,p4080-sec4.0-rtic","fsl,sec4.0-rtic".
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes. Must
+ have a value of 1.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes. Must have a value of 1.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies a two parameters:
+ an offset from the parent physical address and the length
+ the SEC4 registers.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 4 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+EXAMPLE
+ rtic at 6000 {
+ compatible = "fsl,p4080-sec4.0-rtic",
+ "fsl,sec4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+ };
+
+=====================================================================
+P4080 Run Time Integrity Check (RTIC) Memory Node
+ A child node that defines individual RTIC memory regions that are used to
+ perform run-time integrity check of memory areas that should not modified.
+ The node defines a register that contains the memory address &
+ length (combined) and a second register that contains the hash result
+ in big endian format.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,p4080-sec4.0-rtic-memory","fsl,sec4.0-rtic-memory".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies two parameters:
+ an offset from the parent physical address and the length:
+
+ 1. The location of the RTIC memory address & length registers.
+ 2. The location RTIC hash result.
+
+ - fsl,rtic-region
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the HW address (36 bit address) for this region
+ followed by the length of the HW partition to be checked;
+ the address is represented as a 64 bit quantity followed
+ by a 32 bit length.
+
+ - fsl,liodn
+ Usage: optional-but-recommended
+ Value type: <prop-encoded-array>
+ Definition:
+ Specifies the LIODN to be used in conjunction with
+ the ppid-to-liodn table that specifies the PPID to LIODN
+ mapping. Needed if the PAMU is used. Value is a 12 bit value
+ where value is a LIODN ID for this RTIC memory region. This
+ property is normally set by boot firmware.
+
+EXAMPLE
+ rtic-a at 0 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ fsl,liodn = <0x03c>;
+ fsl,rtic-region = <0x12345678 0x12345678 0x12345678>;
+ };
+
+=====================================================================
+P4080 Secure Non-Volatile Storage (SNVS) Node
+
+ Node defines address range and the associated
+ interrupt for the SNVS function. This function
+ monitors security state information & reports
+ security violations.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC4 configuration
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+ - interrupt-parent
+ Usage: (required if interrupt property is defined)
+ Value type: <phandle>
+ Definition: A single <phandle> value that points
+ to the interrupt parent to which the child domain
+ is being mapped.
+
+EXAMPLE
+ sec_mon at 314000 {
+ compatible = "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
+
+=====================================================================
+FULL EXAMPLE
+
+ crypto: crypto at 300000 {
+ compatible = "fsl,p4080-sec4.0", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+
+ sec_jr0: jr at 1000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+ sec_jr1: jr at 2000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2>;
+ };
+
+ sec_jr2: jr at 3000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2>;
+ };
+
+ sec_jr3: jr at 4000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2>;
+ };
+
+ rtic at 6000 {
+ compatible = "fsl,p4080-sec4.0-rtic",
+ "fsl,sec4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a at 0 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b at 20 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c at 40 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d at 60 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon at 314000 {
+ compatible = "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
+
+=====================================================================
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index 5b7fc29..c78e801 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -1,7 +1,7 @@
/*
* P4080DS Device Tree Source
*
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -33,6 +33,17 @@
dma1 = &dma1;
sdhc = &sdhc;
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+
rio0 = &rapidio0;
};
@@ -410,6 +421,88 @@
dr_mode = "host";
phy_type = "ulpi";
};
+
+ crypto: crypto at 300000 {
+ compatible = "fsl,p4080-sec4.0", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <92 2>;
+
+ sec_jr0: jr at 1000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <88 2>;
+ };
+
+ sec_jr1: jr at 2000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <89 2>;
+ };
+
+ sec_jr2: jr at 3000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <90 2>;
+ };
+
+ sec_jr3: jr at 4000 {
+ compatible = "fsl,p4080-sec4.0-job-ring",
+ "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <91 2>;
+ };
+
+ rtic at 6000 {
+ compatible = "fsl,p4080-sec4.0-rtic",
+ "fsl,sec4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a at 0 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b at 20 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c at 40 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d at 60 {
+ compatible = "fsl,p4080-sec4.0-rtic-memory",
+ "fsl,sec4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+ sec_mon: sec_mon at 314000 {
+ compatible = "fsl,p4080-sec4.0-mon", "fsl,sec4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <93 2>;
+ };
};
rapidio0: rapidio at ffe0c0000 {
--
1.7.4.1
More information about the devicetree-discuss
mailing list