[PATCH V2 0/3] Add MX51 basic DT support
Jason Liu
jason.hui at linaro.org
Tue Mar 8 00:05:57 EST 2011
From: Jason Liu <r64343 at freescale.com>
This patchset adds FSL mx51 with device tree support. This
is based on
git://git.secretlab.ca/git/linux-2.6 devicetree/test
This patch has been tested on MX51 babbage board and can
boot up succesfully to linux console with DT enabled.
Jason Liu (3):
arm/dt: add basic mx51 device tree support
arm/dt: add very basic dts file for babbage board
serial/imx: parse from device tree support
arch/arm/boot/dts/babbage.dts | 110 +++++++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 8 ++
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/board-dt.c | 64 ++++++++++++++++++
arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++-
arch/arm/plat-mxc/include/mach/common.h | 1 +
drivers/tty/serial/imx.c | 79 +++++++++++++++++++---
7 files changed, 295 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/boot/dts/babbage.dts
create mode 100644 arch/arm/mach-mx5/board-dt.c
More information about the devicetree-discuss
mailing list