[RFC PATCH v2 12/12] staging: octeon_ethernet: Convert to use device tree.
David Daney
ddaney at caviumnetworks.com
Sat Mar 5 06:42:24 EST 2011
Get MAC address and PHY connection from the device tree.
Signed-off-by: David Daney <ddaney at caviumnetworks.com>
Cc: "David S. Miller" <davem at davemloft.net>
Cc: netdev at vger.kernel.org
---
drivers/staging/octeon/ethernet-mdio.c | 27 +++++----
drivers/staging/octeon/ethernet.c | 88 +++++++++++++++++-------------
drivers/staging/octeon/octeon-ethernet.h | 3 +
3 files changed, 69 insertions(+), 49 deletions(-)
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 0e5dab7..38a0153 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/of_mdio.h>
#include <net/dst.h>
@@ -162,22 +163,24 @@ static void cvm_oct_adjust_link(struct net_device *dev)
int cvm_oct_phy_setup_device(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
+ struct device_node *phy_node;
- int phy_addr = cvmx_helper_board_get_mii_address(priv->port);
- if (phy_addr != -1) {
- char phy_id[20];
+ if (!priv->of_node)
+ return 0;
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", phy_addr);
+ phy_node = of_parse_phandle(priv->of_node, "phy-handle", 0);
+ if (!phy_node)
+ return 0;
- priv->phydev = phy_connect(dev, phy_id, cvm_oct_adjust_link, 0,
- PHY_INTERFACE_MODE_GMII);
+ priv->phydev = of_phy_connect(dev, phy_node, cvm_oct_adjust_link, 0,
+ PHY_INTERFACE_MODE_GMII);
- if (IS_ERR(priv->phydev)) {
- priv->phydev = NULL;
- return -1;
- }
- priv->last_link = 0;
- phy_start_aneg(priv->phydev);
+ if (IS_ERR(priv->phydev)) {
+ priv->phydev = NULL;
+ return -1;
}
+ priv->last_link = 0;
+ phy_start_aneg(priv->phydev);
+
return 0;
}
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 042adf7..16c93e4 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -31,6 +31,7 @@
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/slab.h>
+#include <linux/of_net.h>
#include <net/dst.h>
@@ -112,15 +113,6 @@ int rx_napi_weight = 32;
module_param(rx_napi_weight, int, 0444);
MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter.");
-/*
- * The offset from mac_addr_base that should be used for the next port
- * that is configured. By convention, if any mgmt ports exist on the
- * chip, they get the first mac addresses, The ports controlled by
- * this driver are numbered sequencially following any mgmt addresses
- * that may exist.
- */
-static unsigned int cvm_oct_mac_addr_offset;
-
/**
* cvm_oct_poll_queue - Workqueue for polling operations.
*/
@@ -447,26 +439,13 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
int cvm_oct_common_init(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
- struct sockaddr sa;
- u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) |
- ((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) |
- ((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) |
- ((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) |
- ((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) |
- (u64)(octeon_bootinfo->mac_addr_base[5] & 0xff);
-
- mac += cvm_oct_mac_addr_offset;
- sa.sa_data[0] = (mac >> 40) & 0xff;
- sa.sa_data[1] = (mac >> 32) & 0xff;
- sa.sa_data[2] = (mac >> 24) & 0xff;
- sa.sa_data[3] = (mac >> 16) & 0xff;
- sa.sa_data[4] = (mac >> 8) & 0xff;
- sa.sa_data[5] = mac & 0xff;
-
- if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count)
- printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:"
- " %pM\n", dev->name, sa.sa_data);
- cvm_oct_mac_addr_offset++;
+ struct sockaddr sa = {0};
+
+ if (priv->of_node) {
+ const u8 *mac = of_get_mac_address(priv->of_node);
+ if (mac)
+ memcpy(sa.sa_data, mac, 6);
+ }
/*
* Force the interface to use the POW send if always_use_pow
@@ -594,22 +573,55 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = {
extern void octeon_mdiobus_force_mod_depencency(void);
+static struct device_node * __init cvm_oct_of_get_child(const struct device_node *parent,
+ int reg_val)
+{
+ struct device_node *node = NULL;
+ int size;
+ const __be32 *addr;
+
+ for (;;) {
+ node = of_get_next_child(parent, node);
+ if (!node)
+ break;
+ addr = of_get_property(node, "reg", &size);
+ if (addr && (be32_to_cpu(*addr) == reg_val))
+ break;
+ }
+ return node;
+}
+
+static struct device_node * __init cvm_oct_node_for_port(struct device_node *pip,
+ int interface, int port)
+{
+ struct device_node *ni, *np;
+
+ ni = cvm_oct_of_get_child(pip, interface);
+ if (!ni)
+ return NULL;
+
+ np = cvm_oct_of_get_child(ni, port);
+ of_node_put(ni);
+
+ return np;
+}
+
static int __init cvm_oct_init_module(void)
{
int num_interfaces;
int interface;
int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
int qos;
+ struct device_node *pip;
octeon_mdiobus_force_mod_depencency();
pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION);
- if (OCTEON_IS_MODEL(OCTEON_CN52XX))
- cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */
- else if (OCTEON_IS_MODEL(OCTEON_CN56XX))
- cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */
- else
- cvm_oct_mac_addr_offset = 0;
+ pip = of_find_node_by_path("pip");
+ if (!pip) {
+ pr_err("Error: No 'pip' in /aliases\n");
+ return -EINVAL;
+ }
cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet");
if (cvm_oct_poll_queue == NULL) {
@@ -688,10 +700,11 @@ static int __init cvm_oct_init_module(void)
cvmx_helper_interface_get_mode(interface);
int num_ports = cvmx_helper_ports_on_interface(interface);
int port;
+ int port_index;
- for (port = cvmx_helper_get_ipd_port(interface, 0);
+ for (port_index = 0, port = cvmx_helper_get_ipd_port(interface, 0);
port < cvmx_helper_get_ipd_port(interface, num_ports);
- port++) {
+ port_index++, port++) {
struct octeon_ethernet *priv;
struct net_device *dev =
alloc_etherdev(sizeof(struct octeon_ethernet));
@@ -702,6 +715,7 @@ static int __init cvm_oct_init_module(void)
/* Initialize the device private structure. */
priv = netdev_priv(dev);
+ priv->of_node = cvm_oct_node_for_port(pip, interface, port_index);
INIT_DELAYED_WORK(&priv->port_periodic_work,
cvm_oct_periodic_worker);
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index d581925..9360e22 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -31,6 +31,8 @@
#ifndef OCTEON_ETHERNET_H
#define OCTEON_ETHERNET_H
+#include <linux/of.h>
+
/**
* This is the definition of the Ethernet driver's private
* driver state stored in netdev_priv(dev).
@@ -59,6 +61,7 @@ struct octeon_ethernet {
void (*poll) (struct net_device *dev);
struct delayed_work port_periodic_work;
struct work_struct port_work; /* may be unused. */
+ struct device_node *of_node;
};
int cvm_oct_free_work(void *work_queue_entry);
--
1.7.2.3
More information about the devicetree-discuss
mailing list