[PATCH v2 5/5] ARM: mx5: add basic device tree support for imx51 babbage
Shawn Guo
shawn.guo at linaro.org
Sat Jun 25 04:04:36 EST 2011
This patch adds the i.mx51 dt platform with uart and fec support.
It also adds the dts file imx51 babbage, so that we can have a dt
kernel on babbage booting into console with nfs root.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
arch/arm/boot/dts/imx51-babbage.dts | 93 +++++++++++++++++++++++++++++++++++
arch/arm/mach-mx5/Kconfig | 8 +++
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/imx51-dt.c | 70 ++++++++++++++++++++++++++
4 files changed, 172 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/imx51-babbage.dts
create mode 100644 arch/arm/mach-mx5/imx51-dt.c
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..402cc44
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Freescale i.MX51 Babbage";
+ compatible = "fsl,imx51-babbage", "fsl,imx51";
+ interrupt-parent = <&tzic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ tzic: tz-interrupt-controller at e0000000 {
+ compatible = "fsl,imx51-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe0000000 0x4000>;
+ };
+
+ aips at 70000000 { /* aips-1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x10000000>;
+ ranges;
+
+ spba {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x40000>;
+ ranges;
+
+ uart2: uart at 7000c000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x7000c000 0x4000>;
+ interrupts = <33>;
+ fsl,uart-has-rtscts;
+ };
+ };
+
+ uart0: uart at 73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ fsl,uart-has-rtscts;
+ };
+
+ uart1: uart at 73fc0000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fc0000 0x4000>;
+ interrupts = <32>;
+ fsl,uart-has-rtscts;
+ };
+ };
+
+ aips at 80000000 { /* aips-2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x10000000>;
+ ranges;
+
+ fec at 83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ phy-mode = "mii";
+ };
+ };
+};
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 799fbc4..8bdd0c4 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -62,6 +62,14 @@ endif # ARCH_MX50_SUPPORTED
if ARCH_MX51
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0b9338c..47b483f 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -7,6 +7,7 @@ obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..8bfdb91
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "fec.0", NULL),
+ {}
+};
+
+static const struct of_device_id tzic_of_match[] __initconst = {
+ { .compatible = "fsl,imx51-tzic", },
+ {}
+};
+
+static void __init imx51_dt_init(void)
+{
+ irq_domain_generate_simple(tzic_of_match, MX51_TZIC_BASE_ADDR, 0);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer imx51_timer = {
+ .init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+ "fsl,imx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .map_io = mx51_map_io,
+ .init_early = imx51_init_early,
+ .init_irq = mx51_init_irq,
+ .timer = &imx51_timer,
+ .init_machine = imx51_dt_init,
+ .dt_compat = imx51_dt_board_compat,
+MACHINE_END
--
1.7.4.1
More information about the devicetree-discuss
mailing list