[PATCH 3/3] ARM: mx5: add basic device tree support for imx51 babbage
Grant Likely
grant.likely at secretlab.ca
Sun Jun 19 02:24:58 EST 2011
On Sat, Jun 18, 2011 at 11:19:14PM +0800, Shawn Guo wrote:
> This patch adds the i.mx51 dt platform with uart and fec support.
> It also adds the dts file imx51 babbage, so that we can have a dt
> kernel on babbage booting into console with nfs root.
>
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Looks like a good start to me. I'll pick it up into devicetree/test
(probably on Monday). Only think I see that needs changing is to
modify the compatible properties based on my comments on the first 2
patches.
Acked-by: Grant Likely <grant.likely at secretlab.ca>
g.
> ---
> arch/arm/boot/dts/imx51-babbage.dts | 89 +++++++++++++++++++++++++++++++++++
> arch/arm/mach-mx5/Kconfig | 8 +++
> arch/arm/mach-mx5/Makefile | 1 +
> arch/arm/mach-mx5/imx51-dt.c | 70 +++++++++++++++++++++++++++
> 4 files changed, 168 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx51-babbage.dts
> create mode 100644 arch/arm/mach-mx5/imx51-dt.c
>
> diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
> new file mode 100644
> index 0000000..7976932
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx51-babbage.dts
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "Freescale i.MX51 Babbage";
> + compatible = "fsl,imx51-babbage", "fsl,imx51";
> + interrupt-parent = <&tzic>;
> +
> + chosen {
> + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
> + };
> +
> + memory {
> + reg = <0x90000000 0x20000000>;
> + };
> +
> + tzic: tz-interrupt-controller at e0000000 {
> + compatible = "fsl,imx51-tzic", "fsl,tzic";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + reg = <0xe0000000 0x4000>;
> + };
> +
> + aips at 70000000 { /* aips-1 */
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x70000000 0x10000000>;
> + ranges;
> +
> + spba {
> + compatible = "fsl,spba-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x70000000 0x40000>;
> + ranges;
> +
> + uart at 7000c000 {
> + compatible = "fsl,imx51-uart", "fsl,imx-uart";
> + reg = <0x7000c000 0x4000>;
> + interrupts = <33>;
> + id = <3>;
> + fsl,has-rts-cts;
> + };
> + };
> +
> + uart at 73fbc000 {
> + compatible = "fsl,imx51-uart", "fsl,imx-uart";
> + reg = <0x73fbc000 0x4000>;
> + interrupts = <31>;
> + id = <1>;
> + fsl,has-rts-cts;
> + };
> +
> + uart at 73fc0000 {
> + compatible = "fsl,imx51-uart", "fsl,imx-uart";
> + reg = <0x73fc0000 0x4000>;
> + interrupts = <32>;
> + id = <2>;
> + fsl,has-rts-cts;
> + };
> + };
> +
> + aips at 80000000 { /* aips-2 */
> + compatible = "fsl,aips-bus", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80000000 0x10000000>;
> + ranges;
> +
> + fec at 83fec000 {
> + compatible = "fsl,imx51-fec", "fsl,fec";
> + reg = <0x83fec000 0x4000>;
> + interrupts = <87>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index 799fbc4..8bdd0c4 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -62,6 +62,14 @@ endif # ARCH_MX50_SUPPORTED
> if ARCH_MX51
> comment "i.MX51 machines:"
>
> +config MACH_IMX51_DT
> + bool "Support i.MX51 platforms from device tree"
> + select SOC_IMX51
> + select USE_OF
> + help
> + Include support for Freescale i.MX51 based platforms
> + using the device tree for discovery
> +
> config MACH_MX51_BABBAGE
> bool "Support MX51 BABBAGE platforms"
> select SOC_IMX51
> diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
> index 0b9338c..47b483f 100644
> --- a/arch/arm/mach-mx5/Makefile
> +++ b/arch/arm/mach-mx5/Makefile
> @@ -7,6 +7,7 @@ obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
> obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
>
> obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
> +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
> obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
> obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
> obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
> diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
> new file mode 100644
> index 0000000..8bfdb91
> --- /dev/null
> +++ b/arch/arm/mach-mx5/imx51-dt.c
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach/time.h>
> +
> +#include <mach/common.h>
> +#include <mach/mx51.h>
> +
> +/*
> + * Lookup table for attaching a specific name and platform_data pointer to
> + * devices as they get created by of_platform_populate(). Ideally this table
> + * would not exist, but the current clock implementation depends on some devices
> + * having a specific name.
> + */
> +static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
> + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx-uart.0", NULL),
> + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx-uart.1", NULL),
> + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx-uart.2", NULL),
> + OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "fec.0", NULL),
> + {}
> +};
> +
> +static const struct of_device_id tzic_of_match[] __initconst = {
> + { .compatible = "fsl,imx51-tzic", },
> + {}
> +};
> +
> +static void __init imx51_dt_init(void)
> +{
> + irq_domain_generate_simple(tzic_of_match, MX51_TZIC_BASE_ADDR, 0);
> +
> + of_platform_populate(NULL, of_default_bus_match_table,
> + imx51_auxdata_lookup, NULL);
> +}
> +
> +static void __init imx51_timer_init(void)
> +{
> + mx51_clocks_init(32768, 24000000, 22579200, 0);
> +}
> +
> +static struct sys_timer imx51_timer = {
> + .init = imx51_timer_init,
> +};
> +
> +static const char *imx51_dt_board_compat[] __initdata = {
> + "fsl,imx51-babbage",
> + NULL
> +};
> +
> +DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
> + .map_io = mx51_map_io,
> + .init_early = imx51_init_early,
> + .init_irq = mx51_init_irq,
> + .timer = &imx51_timer,
> + .init_machine = imx51_dt_init,
> + .dt_compat = imx51_dt_board_compat,
> +MACHINE_END
> --
> 1.7.4.1
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
More information about the devicetree-discuss
mailing list