[PATCH 2/3] ARM: gic: add OF based initialization

Rob Herring robherring2 at gmail.com
Wed Jun 8 00:22:20 EST 2011


From: Rob Herring <rob.herring at calxeda.com>

This adds gic initialization using device tree data. An example device tree
binding looks like this:

intc: interrupt-controller at fff11000 {
        compatible = "arm,cortex-a9-gic";
        #interrupt-cells = <1>;
        interrupt-controller;
        reg = <0xfff11000 0x1000>,
              <0xfff10100 0x100>;
        irq-start = <29>;
};

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
 Documentation/devicetree/bindings/arm/gic.txt |   31 +++++++++++++++++++++
 arch/arm/common/gic.c                         |   36 +++++++++++++++++++++++++
 arch/arm/include/asm/hardware/gic.h           |    1 +
 3 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/gic.txt

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..491a503
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,31 @@
+* ARM Generic Interrupt Controller
+
+Some ARM cores have an interrupt controller called GIC. The ARM GIC
+representation in the device tree should be done as under:-
+
+Required properties:
+
+- compatible : should be one of:
+	"arm,cortex-a9-gic"
+	"arm,arm11mp-gic"
+	"nvidia,tegra250-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.  The type shall be a <u32> and the value shall be 1.
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+  first 2 values are the GIC distributor register base and size. The 2nd 2
+  values are the GIC cpu interface register base and size.
+- irq-start : The first actual interrupt that is connected to h/w.
+
+Example:
+
+intc: interrupt-controller at fff11000 {
+        compatible = "arm,cortex-a9-gic";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0xfff11000 0x1000>,
+              <0xfff10100 0x100>;
+        irq-start = <29>;
+};
+
+
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 4ddd0a6..024414d 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,6 +28,8 @@
 #include <linux/smp.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -401,3 +403,37 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
+
+#ifdef CONFIG_OF
+static struct of_device_id gic_ids[] __initdata = {
+	{ .compatible = "arm,cortex-a9-gic" },
+};
+
+void __init gic_of_init(void)
+{
+	struct device_node *np;
+	void __iomem *cpu_base;
+	void __iomem *dist_base;
+	__u32 irq_start = 16;
+	const __be32 *val;
+
+	np = of_find_matching_node(NULL, gic_ids);
+	if (!np)
+		panic("unable to find compatible gic node in dtb\n");
+
+	dist_base = of_iomap(np, 0);
+	if (!dist_base)
+		panic("unable to map gic dist registers\n");
+
+	cpu_base = of_iomap(np, 1);
+	if (!cpu_base)
+		panic("unable to map gic cpu registers\n");
+
+	val = of_get_property(np, "irq-start", NULL);
+	if (val != NULL)
+		irq_start = of_read_ulong(val, 1);
+	of_node_put(np);
+
+	gic_init(0, irq_start, dist_base, cpu_base);
+}
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 0691f9d..954a08e 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -37,6 +37,7 @@ extern void __iomem *gic_cpu_base_addr;
 extern struct irq_chip gic_arch_extn;
 
 void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_of_init(void);
 void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-- 
1.7.4.1



More information about the devicetree-discuss mailing list