[RFC PATCH v5 6/6] MIPS: Octeon: Initialize and fixup device tree.
David Daney
ddaney at caviumnetworks.com
Tue Jun 7 05:19:46 EST 2011
Signed-off-by: David Daney <ddaney at caviumnetworks.com>
---
arch/mips/Kconfig | 1 +
arch/mips/cavium-octeon/Makefile | 3 +
arch/mips/cavium-octeon/octeon-platform.c | 319 +++++++++++++++++++++++++++++
arch/mips/cavium-octeon/setup.c | 39 ++++
4 files changed, 362 insertions(+), 0 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d2849b4..97f044a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1402,6 +1402,7 @@ config CPU_CAVIUM_OCTEON
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
+ select LIBFDT
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index b8d4f63..a11b35a 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -9,6 +9,9 @@
# Copyright (C) 2005-2009 Cavium Networks
#
+CFLAGS_octeon-platform.o = -I$(src)/../../../scripts/dtc/libfdt
+CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
+
obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
obj-y += dma-octeon.o flash_setup.o
obj-y += octeon-memcpy.o
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index cd61d72..17329e5 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -13,10 +13,16 @@
#include <linux/usb.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-rnm-defs.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
static struct octeon_cf_data octeon_cf_data;
@@ -440,6 +446,319 @@ device_initcall(octeon_ohci_device_init);
#endif /* CONFIG_USB */
+static struct of_device_id __initdata octeon_ids[] = {
+ { .compatible = "simple-bus", },
+ { .compatible = "cavium,octeon-6335-uctl", },
+ { .compatible = "cavium,octeon-3860-bootbus", },
+ {},
+};
+
+static bool __init octeon_has_88e1145(void)
+{
+ return !OCTEON_IS_MODEL(OCTEON_CN52XX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN6XXX) &&
+ !OCTEON_IS_MODEL(OCTEON_CN56XX);
+}
+
+static void __init octeon_fdt_set_phy(int eth, int phy_addr)
+{
+ const __be32 *phy_handle;
+ const __be32 *reg;
+ u32 phandle;
+ int phy;
+ const char *p;
+ int current_len;
+ char new_name[20];
+
+ phy_handle = fdt_getprop(initial_boot_params, eth, "phy-handle", NULL);
+ if (!phy_handle)
+ return;
+
+ phandle = be32_to_cpup(phy_handle);
+ phy = fdt_node_offset_by_phandle(initial_boot_params, phandle);
+ if (phy_addr < 0 || phy < 0) {
+ /* Delete the PHY things */
+ fdt_nop_property(initial_boot_params, eth, "phy-handle");
+ if (phy >= 0)
+ fdt_nop_node(initial_boot_params, phy);
+ return;
+ }
+
+ if (octeon_has_88e1145()) {
+ fdt_nop_property(initial_boot_params, phy, "marvell,reg-init");
+ memset(new_name, 0, sizeof(new_name));
+ strcpy(new_name, "marvell,88e1145");
+ p = fdt_getprop(initial_boot_params, phy, "compatible",
+ ¤t_len);
+ if (p && current_len >= strlen(new_name))
+ fdt_setprop_inplace(initial_boot_params, phy,
+ "compatible", new_name, current_len);
+ }
+
+ reg = fdt_getprop(initial_boot_params, phy, "reg", NULL);
+ if (phy_addr == be32_to_cpup(reg))
+ return;
+
+ fdt_setprop_inplace_cell(initial_boot_params, phy, "reg", phy_addr);
+
+ snprintf(new_name, sizeof(new_name), "ethernet-phy@%x", phy_addr);
+
+ p = fdt_get_name(initial_boot_params, phy, ¤t_len);
+ if (p && current_len == strlen(new_name))
+ fdt_set_name(initial_boot_params, phy, new_name);
+ else
+ pr_err("Error: could not rename ethernet phy: <%s>", p);
+}
+
+static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac)
+{
+ u8 new_mac[6];
+ u64 mac = *pmac;
+ int r;
+
+ new_mac[0] = (mac >> 40) & 0xff;
+ new_mac[1] = (mac >> 32) & 0xff;
+ new_mac[2] = (mac >> 24) & 0xff;
+ new_mac[3] = (mac >> 16) & 0xff;
+ new_mac[4] = (mac >> 8) & 0xff;
+ new_mac[5] = mac & 0xff;
+
+ r = fdt_setprop_inplace(initial_boot_params, n, "local-mac-address",
+ new_mac, sizeof(new_mac));
+
+ if (r) {
+ pr_err("Setting \"local-mac-address\" failed %d", r);
+ return;
+ }
+ *pmac = mac + 1;
+}
+
+static void __init octeon_fdt_rm_ethernet(int node)
+{
+ const __be32 *phy_handle;
+
+ phy_handle = fdt_getprop(initial_boot_params, node, "phy-handle", NULL);
+ if (phy_handle) {
+ u32 ph = be32_to_cpup(phy_handle);
+ int p = fdt_node_offset_by_phandle(initial_boot_params, ph);
+ if (p >= 0)
+ fdt_nop_node(initial_boot_params, p);
+ }
+ fdt_nop_node(initial_boot_params, node);
+}
+
+static void __init octeon_fdt_pip_port(int iface, int i, int p, u64 *pmac)
+{
+ char name_buffer[20];
+ int eth;
+ int phy_addr;
+
+ snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p);
+ eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer);
+ if (eth < 0)
+ return;
+ if (p >= cvmx_helper_ports_on_interface(i)) {
+ pr_notice("Deleting port %x:%x\n", i, p);
+ octeon_fdt_rm_ethernet(eth);
+ return;
+ }
+
+ phy_addr = cvmx_helper_board_get_mii_address(16 * i + p);
+ octeon_fdt_set_phy(eth, phy_addr);
+ octeon_fdt_set_mac_addr(eth, pmac);
+}
+
+static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
+{
+ char name_buffer[20];
+ int iface;
+ int p;
+
+ cvmx_helper_interface_enumerate(idx);
+ snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
+ iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
+ if (iface < 0)
+ return;
+
+ for (p = 0; p < 16; p++)
+ octeon_fdt_pip_port(iface, idx, p, pmac);
+}
+
+int __init octeon_prune_device_tree(void)
+{
+ int i, max_port, uart_mask;
+ const char *pip_path;
+ char name_buffer[20];
+ int aliases;
+ u64 mac_addr_base;
+
+ if (fdt_check_header(initial_boot_params))
+ panic("Corrupt Device Tree.");
+
+ aliases = fdt_path_offset(initial_boot_params, "/aliases");
+ if (aliases < 0) {
+ pr_err("Error: No /aliases node in device tree.");
+ return -EINVAL;
+ }
+
+
+ mac_addr_base =
+ ((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 |
+ ((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 |
+ ((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 |
+ ((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 |
+ ((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 |
+ (octeon_bootinfo->mac_addr_base[5] & 0xffull);
+
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX))
+ max_port = 2;
+ else if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+ max_port = 1;
+ else
+ max_port = 0;
+
+ for (i = 0; i < 2; i++) {
+ const char *alias_prop;
+ int mgmt;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "mix%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+ if (alias_prop) {
+ mgmt = fdt_path_offset(initial_boot_params, alias_prop);
+ if (mgmt < 0)
+ continue;
+ if (i >= max_port) {
+ pr_notice("Deleting mix%d\n", i);
+ octeon_fdt_rm_ethernet(mgmt);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ } else {
+ octeon_fdt_set_phy(mgmt, i);
+ octeon_fdt_set_mac_addr(mgmt, &mac_addr_base);
+ }
+ }
+ }
+
+ pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
+ if (pip_path) {
+ int pip = fdt_path_offset(initial_boot_params, pip_path);
+ if (pip >= 0)
+ for (i = 0; i < 4; i++)
+ octeon_fdt_pip_iface(pip, i, &mac_addr_base);
+ }
+
+ /* I2C */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN63XX) ||
+ OCTEON_IS_MODEL(OCTEON_CN56XX))
+ max_port = 2;
+ else
+ max_port = 1;
+
+ for (i = 0; i < 2; i++) {
+ const char *alias_prop;
+ int i2c;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "twsi%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ i2c = fdt_path_offset(initial_boot_params, alias_prop);
+ if (i2c < 0)
+ continue;
+ if (i >= max_port) {
+ pr_notice("Deleting twsi%d\n", i);
+ fdt_nop_node(initial_boot_params, i2c);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+ }
+
+ /* SMI/MDIO Same number of ports as I2C*/
+
+ for (i = 0; i < 2; i++) {
+ const char *alias_prop;
+ int i2c;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "smi%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ i2c = fdt_path_offset(initial_boot_params, alias_prop);
+ if (i2c < 0)
+ continue;
+ if (i >= max_port) {
+ pr_notice("Deleting smi%d\n", i);
+ fdt_nop_node(initial_boot_params, i2c);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+ }
+
+ /* Serial */
+ uart_mask = 0;
+
+#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+ /*
+ * If we are configured to run as the second of two kernels,
+ * disable uart0 and enable uart1. Uart0 is owned by the first
+ * kernel
+ */
+ uart_mask |= 2; /* uart1 */
+#else
+ /*
+ * We are configured for the first kernel. We'll enable uart0
+ * if the bootloader told us to use 0, otherwise will enable
+ * uart 1.
+ */
+ if (octeon_get_boot_uart() == 0)
+ uart_mask |= 1; /* uart0 */
+ if (octeon_get_boot_uart() == 1)
+ uart_mask |= 2; /* uart1 */
+
+#ifdef CONFIG_KGDB
+ uart_mask |= 2; /* uart1 */
+#endif
+#endif
+
+ /* Right now CN52XX is the only chip with a third uart */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+ uart_mask |= 4; /* uart2 */
+
+ for (i = 0; i < 3; i++) {
+ const char *alias_prop;
+ int uart;
+ snprintf(name_buffer, sizeof(name_buffer),
+ "uart%d", i);
+ alias_prop = fdt_getprop(initial_boot_params, aliases,
+ name_buffer, NULL);
+
+ if (alias_prop) {
+ uart = fdt_path_offset(initial_boot_params, alias_prop);
+ if (uart_mask & (1 << i))
+ continue;
+ pr_notice("Deleting uart%d\n", i);
+ fdt_nop_node(initial_boot_params, uart);
+ fdt_nop_property(initial_boot_params, aliases,
+ name_buffer);
+ }
+ }
+
+ return 0;
+}
+
+static int __init octeon_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, octeon_ids, NULL);
+}
+device_initcall(octeon_publish_devices);
+
+
MODULE_AUTHOR("David Daney <ddaney at caviumnetworks.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 36221b3..15f876e 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -20,6 +20,8 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
@@ -797,3 +799,40 @@ void prom_free_prom_memory(void)
}
#endif
}
+
+int octeon_prune_device_tree(void);
+
+extern const char __dtb_octeon_3xxx_begin;
+extern const char __dtb_octeon_3xxx_end;
+void __init device_tree_init(void)
+{
+ int dt_size;
+ struct boot_param_header *fdt;
+ bool do_prune;
+
+ if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) {
+ fdt = (struct boot_param_header *)PHYS_TO_XKSEG_CACHED(octeon_bootinfo->fdt_addr);
+ if (fdt_check_header(fdt))
+ panic("Corrupt Device Tree passed to kernel.");
+ dt_size = be32_to_cpu(fdt->totalsize);
+ do_prune = false;
+ } else {
+ fdt = (struct boot_param_header *)&__dtb_octeon_3xxx_begin;
+ dt_size = &__dtb_octeon_3xxx_end - &__dtb_octeon_3xxx_begin;
+ do_prune = true;
+ }
+
+ /* Copy the default tree from init memory. */
+ initial_boot_params = early_init_dt_alloc_memory_arch(dt_size, 8);
+ if (initial_boot_params == NULL)
+ panic("Could not allocate initial_boot_params\n");
+ memcpy(initial_boot_params, fdt, dt_size);
+
+ if (do_prune) {
+ octeon_prune_device_tree();
+ pr_info("Using internal Device Tree.\n");
+ } else {
+ pr_info("Using passed Device Tree.\n");
+ }
+ unflatten_device_tree();
+}
--
1.7.2.3
More information about the devicetree-discuss
mailing list