[PATCH 2/4] powerpc, mpc52xx: add a4m072 board support
Grant Likely
grant.likely at secretlab.ca
Sun Jul 31 14:05:25 EST 2011
On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs at denx.de>
> cc: Grant Likely <grant.likely at secretlab.ca>
> cc: devicetree-discuss at ozlabs.org
> cc: Wolfgang Denk <wd at denx.de>
> ---
> For this patchseries following patch is needed:
>
> http://patchwork.ozlabs.org/patch/91919/
>
> Grant? Do you have some comments on that patch?
>
> arch/powerpc/boot/dts/a4m072.dts | 273 ++++++++++++++++++++++++++
> arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
> 2 files changed, 274 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/a4m072.dts
>
> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
> new file mode 100644
> index 0000000..cea1c6f
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/a4m072.dts
> @@ -0,0 +1,273 @@
> +/*
> + * a4m072 board Device Tree Source
> + *
> + * Copyright (C) 2011 DENX Software Engineering GmbH
> + * Heiko Schocher <hs at denx.de>
> + *
> + * Copyright (C) 2007 Semihalf
> + * Marian Balakowicz <m8 at semihalf.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + model = "anonymous,a4m072";
> + compatible = "anonymous,a4m072";
anonymous? This bears some description.
Also, 5200b boards can use the mpc5200b.dtsi include file. This one
should too.
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&mpc5200_pic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + PowerPC,5200 at 0 {
> + device_type = "cpu";
> + reg = <0>;
> + d-cache-line-size = <32>;
> + i-cache-line-size = <32>;
> + d-cache-size = <0x4000>; // L1, 16K
> + i-cache-size = <0x4000>; // L1, 16K
> + timebase-frequency = <0>; /* From boot loader */
> + bus-frequency = <0>; /* From boot loader */
> + clock-frequency = <0>; /* From boot loader */
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x04000000>;
> + };
> +
> + soc5200 at f0000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "fsl,mpc5200b-immr";
> + ranges = <0 0xf0000000 0x0000c000>;
> + reg = <0xf0000000 0x00000100>;
> + bus-frequency = <0>; /* From boot loader */
> + system-frequency = <0>; /* From boot loader */
> +
> + cdm at 200 {
> + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> + reg = <0x200 0x38>;
> + fsl,ext_48mhz_en = <0x0>;
> + fsl,fd_enable = <0x01>;
> + fsl,fd_counters = <0xbbbb>;
> + };
> +
> + mpc5200_pic: interrupt-controller at 500 {
> + // 5200 interrupts are encoded into two levels;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> + reg = <0x500 0x80>;
> + };
> +
> + timer at 600 {
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x600 0x80>;
> + interrupts = <1 9 0>;
> + fsl,has-wdt;
> + };
> +
> + gpt3: timer at 630 { /* General Purpose Timer in GPIO mode */
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x630 0x10>;
> + interrupts = <1 12 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpt4: timer at 640 { /* General Purpose Timer in GPIO mode */
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x640 0x10>;
> + interrupts = <1 13 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpt5: timer at 650 { /* General Purpose Timer in GPIO mode */
> + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> + reg = <0x650 0x10>;
> + interrupts = <1 14 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + can at 900 {
> + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> + interrupts = <2 17 0>;
> + reg = <0x900 0x80>;
> + };
> +
> + can at 980 {
> + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> + interrupts = <2 18 0>;
> + reg = <0x980 0x80>;
> + };
> +
> + gpio_simple: gpio at b00 {
> + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> + reg = <0xb00 0x40>;
> + interrupts = <1 7 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + fsl,port_config = <0x19051444>;
> + };
> +
> + gpio_wkup: gpio at c00 {
> + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> + reg = <0xc00 0x40>;
> + interrupts = <1 8 0 0 3 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + usb at 1000 {
> + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> + reg = <0x1000 0xff>;
> + interrupts = <2 6 0>;
> + };
> +
> + dma-controller at 1200 {
> + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> + reg = <0x1200 0x80>;
> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
> + 3 4 0 3 5 0 3 6 0 3 7 0
> + 3 8 0 3 9 0 3 10 0 3 11 0
> + 3 12 0 3 13 0 3 14 0 3 15 0>;
> + };
> +
> + xlb at 1f00 {
> + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> + reg = <0x1f00 0x100>;
> + };
> +
> + psc at 2000 {
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + reg = <0x2000 0x100>;
> + interrupts = <2 1 0>;
> + };
> +
> + psc at 2200 {
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + reg = <0x2200 0x100>;
> + interrupts = <2 2 0>;
> + };
> +
> + psc at 2400 {
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + reg = <0x2400 0x100>;
> + interrupts = <2 3 0>;
> + };
> +
> + psc at 2c00 {
> + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> + reg = <0x2c00 0x100>;
> + interrupts = <2 4 0>;
> + };
> +
> + ethernet at 3000 {
> + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> + reg = <0x3000 0x400>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + interrupts = <2 5 0>;
> + phy-handle = <&phy0>;
> + };
> +
> + mdio at 3000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> + reg = <0x3000 0x400>;
> + interrupts = <2 5 0>;
> +
> + phy0: ethernet-phy at 1f {
> + reg = <0x1f>;
> + interrupts = <1 2 0>; /* IRQ 2 active low */
> + };
> + };
> +
> + ata at 3a00 {
> + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> + reg = <0x3a00 0x100>;
> + interrupts = <2 7 0>;
> + };
> +
> + i2c at 3d40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> + reg = <0x3d40 0x40>;
> + interrupts = <2 16 0>;
> +
> + hwmon at 2e {
> + compatible = "nsc,lm87";
> + reg = <0x2e>;
> + };
> + rtc at 51 {
> + compatible = "nxp,rtc8564";
> + reg = <0x51>;
> + };
> + };
> +
> + sram at 8000 {
> + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> + reg = <0x8000 0x4000>;
> + };
> + };
> +
> + localbus {
> + compatible = "fsl,mpc5200b-lpb","simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0 0xfe000000 0x02000000
> + 1 0 0x62000000 0x00400000
> + 2 0 0x64000000 0x00200000
> + 3 0 0x66000000 0x01000000
> + 6 0 0x68000000 0x01000000
> + 7 0 0x6a000000 0x00000004
> + >;
> +
> + flash at 0,0 {
> + compatible = "cfi-flash";
> + reg = <0 0 0x02000000>;
> + bank-width = <2>;
> + #size-cells = <1>;
> + #address-cells = <1>;
> + };
> + sram0 at 1,0 {
> + compatible = "mtd-ram";
> + reg = <1 0x00000 0x00400000>;
> + bank-width = <2>;
> + };
> + };
> +
> + pci at f0000d00 {
> + #interrupt-cells = <1>;
> + #size-cells = <2>;
> + #address-cells = <3>;
> + device_type = "pci";
> + compatible = "fsl,mpc5200-pci";
> + reg = <0xf0000d00 0x100>;
> + interrupt-map-mask = <0xf800 0 0 7>;
> + interrupt-map = <
> + /* IDSEL 0x16 */
> + 0xc000 0 0 1 &mpc5200_pic 1 3 3
> + 0xc000 0 0 2 &mpc5200_pic 1 3 3
> + 0xc000 0 0 3 &mpc5200_pic 1 3 3
> + 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
> + clock-frequency = <0>; /* From boot loader */
> + interrupts = <2 8 0 2 9 0 2 10 0>;
> + bus-range = <0 0>;
> + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
> + 0x02000000 0 0x90000000 0x90000000 0 0x10000000
> + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
> + };
> +};
> diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> index e36d6e2..192b4ff 100644
> --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
>
> /* list of the supported boards */
> static const char *board[] __initdata = {
> + "anonymous,a4m072",
> "intercontrol,digsy-mtc",
> "manroland,mucmc52",
> "manroland,uc101",
> --
> 1.7.5.4
>
More information about the devicetree-discuss
mailing list