[PATCH v2 6/7] i2c: pxa: support i2c controller from DT

Grant Likely grant.likely at secretlab.ca
Sat Jul 30 02:52:22 EST 2011


On Thu, Jul 28, 2011 at 02:41:32PM +0800, Haojian Zhuang wrote:
> support i2c-pxa controller from DT.
> 
> Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
> ---
>  drivers/i2c/busses/i2c-pxa.c |   51 +++++++++++++++++++++++++++++++----------
>  1 files changed, 38 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
> index d603646..8c27733 100644
> --- a/drivers/i2c/busses/i2c-pxa.c
> +++ b/drivers/i2c/busses/i2c-pxa.c
> @@ -29,6 +29,7 @@
>  #include <linux/errno.h>
>  #include <linux/interrupt.h>
>  #include <linux/i2c-pxa.h>
> +#include <linux/of_device.h>
>  #include <linux/of_i2c.h>
>  #include <linux/platform_device.h>
>  #include <linux/err.h>
> @@ -1044,15 +1045,31 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
>  	.functionality	= i2c_pxa_functionality,
>  };
>  
> +static const struct of_device_id pxa_i2c_of_match[] = {
> +	{ .compatible = "mrvl,pxa255-i2c",    .data = (void *)REGS_PXA2XX, },
> +	{ .compatible = "mrvl,pxa300-pwri2c", .data = (void *)REGS_PXA3XX, },
> +	{},
> +};
> +
>  static int i2c_pxa_probe(struct platform_device *dev)
>  {
> +	struct device_node *np = dev->dev.of_node;
> +	const struct of_device_id *match;
>  	struct pxa_i2c *i2c;
> -	struct resource *res;
>  	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
>  	const struct platform_device_id *id = platform_get_device_id(dev);
> -	enum pxa_i2c_types i2c_type = id->driver_data;
> -	int ret;
> -	int irq;
> +	enum pxa_i2c_types i2c_type;
> +	struct resource *res;
> +	int irq, ret;
> +	static int idx = 0;
> +
> +	if (np) {
> +		match = of_match_device(pxa_i2c_of_match, &dev->dev);
> +		if (match == NULL)
> +			return -ENODEV;
> +		i2c_type = (int)match->data;
> +	} else
> +		i2c_type = id->driver_data;
>  
>  	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
>  	irq = platform_get_irq(dev, 0);
> @@ -1074,16 +1091,23 @@ static int i2c_pxa_probe(struct platform_device *dev)
>  	spin_lock_init(&i2c->lock);
>  	init_waitqueue_head(&i2c->wait);
>  
> -	/*
> -	 * If "dev->id" is negative we consider it as zero.
> -	 * The reason to do so is to avoid sysfs names that only make
> -	 * sense when there are multiple adapters.
> -	 */
> -	i2c->adap.nr = dev->id;
> -	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
> -		 i2c->adap.nr);
>  
> -	i2c->clk = clk_get(&dev->dev, NULL);
> +	if (np) {
> +		i2c->adap.nr = idx++;

Use this so that a bus number gets dynamically assigned:
		i2c->adap.nr = -1;

> +		snprintf(i2c->adap.name, sizeof(i2c->adap.name),
> +			"pxa2xx-i2c.%u", i2c->adap.nr);
> +		i2c->clk = clk_get_sys(i2c->adap.name, NULL);

Missing i2c->adap.dev.of_node = dev->dev.of_node;

and after the bus is registered:

of_i2c_register_devices(&i2c->adap);

> +	} else {
> +		/*
> +		 * If "dev->id" is negative we consider it as zero.
> +		 * The reason to do so is to avoid sysfs names that only make
> +		 * sense when there are multiple adapters.
> +		 */
> +		i2c->adap.nr = dev->id;
> +		snprintf(i2c->adap.name, sizeof(i2c->adap.name),
> +			"pxa_i2c-i2c.%u", i2c->adap.nr);
> +		i2c->clk = clk_get(&dev->dev, NULL);
> +	}
>  	if (IS_ERR(i2c->clk)) {
>  		ret = PTR_ERR(i2c->clk);
>  		goto eclk;
> @@ -1234,6 +1258,7 @@ static struct platform_driver i2c_pxa_driver = {
>  		.name	= "pxa2xx-i2c",
>  		.owner	= THIS_MODULE,
>  		.pm	= I2C_PXA_DEV_PM_OPS,
> +		.of_match_table	= pxa_i2c_of_match,
>  	},
>  	.id_table	= i2c_pxa_id_table,
>  };
> -- 
> 1.5.6.5
> 


More information about the devicetree-discuss mailing list