[PATCH 1/3 v2] usb: tegra20-ehci: Add devicetree support.

[Andrew Chew]

> > +Required properties for type = "utmi".  These values are 
> derived from
> > +characterization by system engineering.
> > + - hssync_start_delay
> > + - idle_wait_delay
> > + - elastic_limit
> > + - term_range_adj
> > + - xcvr_setup
> > + - xcvr_lsfslew
> > + - xcvr_lsrslew
> 
> All of these custom properties should be prefixed with "nvidia," to
> avoid namespace collisions.

Are you saying we should prefix with "nvidia," on ALL of the properties I've defined for the tegra20-ehci node?  Or specifically those seven that you pointed out?  Because I don't see a difference in terms of "custom"-ality between say, hssync-start-delay, and the other stuff like phy-type, mode, power-down-on-bus-suspend, and the reset-gpio and clk from phy-type=ulpi...unless we're considering stuff like phy-type to be a standard USB host controller node property.