[PATCH 2/2] arm: dt: Add device tree support for i2c instance 1 on exynos4 dt machine

[G, Manjunath Kondaiah]

Abraham,
Few comments on i2c child devices handling:

On 18 July 2011 06:20, Thomas Abraham <thomas.abraham at linaro.org> wrote:
> Add device node for i2c instance 1 and list all its connected slave
> devices.
>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/boot/dts/exynos4-smdkv310.dts  |   19 ++++++++++++++++++-
>  arch/arm/mach-exynos4/Kconfig           |    1 +
>  arch/arm/mach-exynos4/mach-exynos4-dt.c |    9 +++++++++
>  3 files changed, 28 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4-smdkv310.dts b/arch/arm/boot/dts/exynos4-smdkv310.dts
> index d65c18c..29c40ed 100644
> --- a/arch/arm/boot/dts/exynos4-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4-smdkv310.dts
> @@ -23,7 +23,7 @@
>        };
>
>        chosen {
> -               bootargs = "root=/dev/mmcblk0p1 rootfstype=ext3 rootwait console=ttySAC1,115200";
> +               bootargs = "root=/dev/mmcblk0p1 rootfstype=ext3 rootwait console=ttySAC1,115200 init=/linuxrc";
>        };
>
>        soc {
> @@ -64,5 +64,22 @@
>                        samsung,sdhci-cd-type = <0>;
>                        samsung,sdhci-clkdiv-external;
>                };
> +
> +               i2c at 13870000 {
> +                       compatible = "samsung,s3c2440-i2c";
> +                       reg = <0x13870000 0x100>;
> +                       interrupts = <345>;
> +                       samsung,i2c-bus-number = <1>;
> +                       samsung,i2c-slave-addr = <16>;
> +                       samsung,i2c-sda-delay = <100>;
> +                       samsung,i2c-max-bus-freq = <100000>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       wm8994 at 1a {
> +                               compatible = "wlf,wm8994";
> +                               reg = <0x1a>;
> +                       };

The i2c child devices are board specific.
For ex: few boards such as smdkxxx based on exynos4 has wm8994 with
i2c1 controller
where as other boards based on exynos4 does not have any i2c1 devices.
Hence these child entries should go to board specific .dts file right?
There should be soc specific .dts file and board specific dts file
should include soc dts file.

-M