[PATCH 3/3] arm: exynos4: Add a new Exynos4210 device tree enabled machine
Thomas Abraham
thomas.abraham at linaro.org
Sun Jul 17 14:01:44 EST 2011
Hi Grant,
On 16 July 2011 00:19, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Fri, Jul 15, 2011 at 05:12:08PM +0530, Thomas Abraham wrote:
>> Basic Exynos4210 machine with device tree support that can boot on a
>> Exynos4210 processor based board and bring up the console.
>>
>> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
>
> Hey Thomas,
>
> The patch looks pretty good. Comments below.
>
>> ---
>> Documentation/devicetree/bindings/arm/samsung.txt | 10 +-
>> arch/arm/mach-exynos4/Kconfig | 10 ++
>> arch/arm/mach-exynos4/Makefile | 1 +
>> arch/arm/mach-exynos4210-dt.c | 128 +++++++++++++++++++++
>
> This file is getting put in the wrong place.
Sorry. I messed it up.
>
>> 4 files changed, 144 insertions(+), 5 deletions(-)
>> create mode 100644 arch/arm/mach-exynos4210-dt.c
>>
>> diff --git a/Documentation/devicetree/bindings/arm/samsung.txt b/Documentation/devicetree/bindings/arm/samsung.txt
>> index 594cb97..5b123dc 100644
>> --- a/Documentation/devicetree/bindings/arm/samsung.txt
>> +++ b/Documentation/devicetree/bindings/arm/samsung.txt
>> @@ -1,9 +1,9 @@
>> -Samsung Exynos4 S5PV310 SoC based SMDKV310 eval board
>> +Samsung Exynos4210 architecture based SMDKV310 eval board
>>
>> - SMDKV310 eval board is based on S5PV310 SoC which belongs to
>> - Samsung's Exynos4 family of application processors.
>> + SMDKV310 eval board is based on Samsung's Exynos4 family of
>> + application processors.
>>
>> Required root node properties:
>> - - compatible = "samsung,smdkv310","samsung,s5pv310"
>> + - compatible = "samsung,smdkv310", "samsung,exynos4210'.
>> (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
>> - (b) "samsung,s5pv310" - for boards based on S5PV310 SoC.
>> + (c) "samsung,exynos4210" - for boards based on Exynos4210 processor.
>
> Inconsistent whitespace. The rest of this comment block is using
> spaces for indentation.
>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index 1435fc3..205664f 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -186,6 +186,16 @@ config MACH_NURI
>> help
>> Machine support for Samsung Mobile NURI Board.
>>
>> +config MACH_EXYNOS4210_DT
>> + bool "Samsung's Exynos4210 Machine with DT support"
>
> bool "Samsung Exynos4 Machine using device tree"
>
> This file should be suitable for multiple Exynos4 SoCs and boards.
Ok. This will be changed to Exynos4.
>
>> + select CPU_EXYNOS4210
>> + select USE_OF
>> + select S3C_DEV_HSMMC
>> + select S3C_DEV_HSMMC2
>> + select EXYNOS4_SETUP_SDHCI
>> + help
>> + Machine support for Samsung Exynos4210 machine with device tree enabled.
>> +
>> endmenu
>>
>> comment "Configuration for HSMMC bus width"
>> diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
>> index 60fe5ec..2625dc4 100644
>> --- a/arch/arm/mach-exynos4/Makefile
>> +++ b/arch/arm/mach-exynos4/Makefile
>> @@ -36,6 +36,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
>> obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
>> obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
>> obj-$(CONFIG_MACH_NURI) += mach-nuri.o
>> +obj-$(CONFIG_MACH_EXYNOS4210_DT) += mach-exynos4-dt.o
>>
>> # device support
>>
>> diff --git a/arch/arm/mach-exynos4210-dt.c b/arch/arm/mach-exynos4210-dt.c
>> new file mode 100644
>> index 0000000..33809e4
>> --- /dev/null
>> +++ b/arch/arm/mach-exynos4210-dt.c
>> @@ -0,0 +1,126 @@
>> +/*
>> + * Samsung's Exynos4210 device tree enabled machine.
>> + *
>> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + * Copyright (c) 2010-2011 Linaro Ltd.
>> + * www.linaro.org
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <linux/serial_core.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/io.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/irq.h>
>> +
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach-types.h>
>> +
>> +#include <plat/regs-serial.h>
>> +#include <plat/exynos4.h>
>> +#include <plat/cpu.h>
>> +#include <plat/sdhci.h>
>> +
>> +#include <mach/map.h>
>> +
>> +/* Following are default values for UCON, ULCON and UFCON UART registers */
>> +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
>> + S3C2410_UCON_RXILEVEL | \
>> + S3C2410_UCON_TXIRQMODE | \
>> + S3C2410_UCON_RXIRQMODE | \
>> + S3C2410_UCON_RXFIFO_TOI | \
>> + S3C2443_UCON_RXERR_IRQEN)
>> +
>> +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
>> + S5PV210_UFCON_TXTRIG4 | \
>> + S5PV210_UFCON_RXTRIG4)
>> +
>> +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
>> + [0] = {
>> + .hwport = 0,
>> + .ucon = SMDKV310_UCON_DEFAULT,
>> + .ufcon = SMDKV310_UFCON_DEFAULT,
>> + },
>> + [1] = {
>> + .hwport = 1,
>> + .ucon = SMDKV310_UCON_DEFAULT,
>> + .ufcon = SMDKV310_UFCON_DEFAULT,
>> + },
>> + [2] = {
>> + .hwport = 2,
>> + .ucon = SMDKV310_UCON_DEFAULT,
>> + .ufcon = SMDKV310_UFCON_DEFAULT,
>> + },
>> + [3] = {
>> + .hwport = 3,
>> + .ucon = SMDKV310_UCON_DEFAULT,
>> + .ufcon = SMDKV310_UFCON_DEFAULT,
>> + },
>> +};
>
> And you're working on eventually eliminating this, correct?
Yes. This will be eventually elimnated. This is temporary.
>
>> +
>> +static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
>> + .cd_type = S3C_SDHCI_CD_INTERNAL,
>> + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
>> +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
>> + .max_width = 8,
>> + .host_caps = MMC_CAP_8_BIT_DATA,
>> +#endif
>> +};
>> +
>> +static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
>> + .cd_type = S3C_SDHCI_CD_INTERNAL,
>> + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
>> +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
>> + .max_width = 8,
>> + .host_caps = MMC_CAP_8_BIT_DATA,
>> +#endif
>
> These parameters can definitely be obtained from the device tree right
> now with simple property reads in the device driver. It is not a hard
> conversion. I would drop the s3c_hsmmc*_def_platdata tables from this
> file.
>
> Since this is a new board support file, it should be just fine to
> merge this code without the platdata hunks, even if it takes a little
> bit longer to add the decoding to the sdhci driver.
These parameters will be moved to dts file and driver will be updated
to retreive it from dtb.
>
>> +};
>> +
>> +static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
>> + OF_DEV_AUXDATA("samsung,s3c-sdhci", EXYNOS4_PA_HSMMC(2),
>> + "s3c-sdhci.2", &s3c_hsmmc2_def_platdata),
>> + OF_DEV_AUXDATA("samsung,s3c-sdhci", EXYNOS4_PA_HSMMC(0),
>> + "s3c-sdhci.0", &s3c_hsmmc0_def_platdata),
>> + {},
>> +};
>
> It would be helpful to put a comment block on this table describing
> that it is necessary to get things working, but will be eliminated in
> the future. (I'm assuming that setting the device name to
> "s3c-sdhci.*" is important. If this table is only for the platdata,
> then it can be removed immediately.
The device name is important. I will add a comment as you have suggsted.
>
>> +
>> +static void __init exynos4_dt_map_io(void)
>> +{
>> + s5p_init_io(NULL, 0, S5P_VA_CHIPID);
>> + s3c24xx_init_clocks(24000000);
>> + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
>> +}
>> +
>> +static const struct of_device_id intc_of_match[] __initconst = {
>> + { .compatible = "samsung,exynos4-gic", },
>> + {}
>> +};
>> +
>> +static void __init exynos4_dt_machine_init(void)
>> +{
>> + s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
>> + s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
>> +
>> + irq_domain_generate_simple(intc_of_match, EXYNOS4_PA_GIC_DIST, 0);
>> + of_platform_populate(NULL, of_default_bus_match_table,
>> + exynos4_auxdata_lookup, NULL);
>> +}
>> +
>> +static char const *exynos4_dt_compat[] __initdata = {
>> + "samsung,exynos4210",
>> + NULL
>> +};
>> +
>> +DT_MACHINE_START(SMDKV310, "Samsung Exynos4 DT")
>> + /* Maintainer: Kukjin Kim <kgene.kim at samsung.com> */
>> + .boot_params = S5P_PA_SDRAM + 0x100,
>
> Drop .boot_params. It isn't used for DT booting.
Ok. I will remove it.
Thanks,
Thomas.
>
>> + .init_irq = exynos4_init_irq,
>> + .map_io = exynos4_dt_map_io,
>> + .init_machine = exynos4_dt_machine_init,
>> + .timer = &exynos4_timer,
>> + .dt_compat = exynos4_dt_compat,
>> +MACHINE_END
>> --
>> 1.7.1
>>
>
More information about the devicetree-discuss
mailing list