[PATCH 2/3] arm: dts: Add nodes in smdkv310 device tree source file

[Thomas Abraham]

Hi Grant,

On 16 July 2011 00:27, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Fri, Jul 15, 2011 at 05:12:07PM +0530, Thomas Abraham wrote:
>> From: Thomas Abraham <thomas.abraham at linaro.org>
>>
>> Include device tree nodes for watchdog timer and sdhci instance 0 and 1.
>>
>> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
>> ---
>>  arch/arm/boot/dts/exynos4-smdkv310.dts |   55 ++++++++++++++++++++++++++++++-
>>  1 files changed, 53 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4-smdkv310.dts b/arch/arm/boot/dts/exynos4-smdkv310.dts
>> index dd6c80a..7f27d95 100644
>> --- a/arch/arm/boot/dts/exynos4-smdkv310.dts
>> +++ b/arch/arm/boot/dts/exynos4-smdkv310.dts
>> @@ -1,11 +1,62 @@
>> +/*
>> + * Samsung's Exynos4210 based smdkv310 board device tree source.
>> + *
>> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + * Copyright (c) 2010-2011 Linaro Ltd.
>> + *           www.linaro.org
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>>  /dts-v1/;
>>  /include/ "skeleton.dtsi"
>>
>>  / {
>>       model = "Samsung Exynos4 SMDKV310 eval board";
>> -     compatible = "samsung,smdkv310", "samsung,s5pv310";
>> +     compatible = "samsung,smdkv310", "samsung,exynos4210";
>>
>>       memory {
>> -             reg = <0x40000000 0x08000000>;
>> +             reg = <0x40000000 0x80000000>;
>> +     };
>> +
>> +     chosen {
>> +             bootargs = "root=/dev/mmcblk0p1 rootfstype=ext3 rootwait console=ttySAC1,115200";
>> +     };
>> +
>> +     soc {
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             interrupt-parent = <&intc>;
>> +             compatible = "simple-bus";
>> +             ranges;
>> +
>> +             intc:interrupt-controller at 10501000 {
>> +                     compatible = "samsung,exynos4-gic","arm,cortex-a9-gic";
>> +                     #interrupt-cells = <1>;
>> +                     interrupt-controller;
>> +                     reg = <0x10501000 0x1000>, <0x10500100 0x100>;
>> +                     irq-start = <61>;
>> +             };
>> +
>> +             watchdog at 10060000 {
>> +                     compatible = "samsung,s3c2410-wdt";
>
> Need documentation.

The watchdog bindings and driver dt support have been submitted in a
seperate patch. So the documentation for watchdog bindings is not
included in this patch.

Thanks,
Thomas


>
>> +                     reg = <0x10060000 0x400>;
>> +                     interrupts = <552>;
>> +             };
>> +
>> +             sdhci at 12530000 {
>> +                     compatible = "samsung,s3c-sdhci";
>> +                     reg = <0x12530000 0x1000>;
>> +                     interrupts = <362>;
>> +             };
>> +
>> +             sdhci at 12510000 {
>> +                     compatible = "samsung,s3c-sdhci";
>> +                     reg = <0x12510000 0x1000>;
>> +                     interrupts = <360>;
>> +             };
>>       };
>>  };
>> --
>> 1.7.1
>>
>