[PATCH v3 1/2] serial/imx: get rid of the uses of cpu_is_mx1()

Sascha Hauer s.hauer at pengutronix.de
Thu Jul 7 02:37:40 EST 2011


On Thu, Jul 07, 2011 at 12:30:13AM +0800, Shawn Guo wrote:
> The patch removes all the uses of cpu_is_mx1().  Instead, it uses
> the .id_table of platform_driver to distinguish the uart device type,
> IMX1_UART and IMX21_UART.  The IMX21_UART type runs on all i.mx
> except i.mx1.
> 
> A couple of !cpu_is_mx1() logic gets turned into IS_IMX21_UART,
> as the codes wrapped there are really IMX21 type uart specific.
> 
> It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are
> not used anywhere.

Two typos and one minor nitpick, otherwise I'm fine with it. Should go
via the i.MX tree rather than the serial tree. Alan?


> 
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Alan Cox <alan at linux.intel.com>
> Acked-by: Grant Likely <grant.likely at secretlab.ca>
> ---
>  arch/arm/mach-imx/clock-imx1.c                |    6 +-
>  arch/arm/mach-imx/clock-imx21.c               |    8 ++--
>  arch/arm/mach-imx/clock-imx25.c               |   11 ++--
>  arch/arm/mach-imx/clock-imx27.c               |   13 +++--
>  arch/arm/mach-imx/clock-imx31.c               |   11 ++--
>  arch/arm/mach-imx/clock-imx35.c               |    7 ++-
>  arch/arm/mach-mx5/clock-mx51-mx53.c           |   18 ++++---
>  arch/arm/plat-mxc/devices/platform-imx-uart.c |    7 ++-
>  drivers/tty/serial/imx.c                      |   66 ++++++++++++++++++++-----
>  9 files changed, 97 insertions(+), 50 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
> index a65838f..42ef76a 100644
> --- a/arch/arm/mach-imx/clock-imx25.c
> +++ b/arch/arm/mach-imx/clock-imx25.c
> @@ -272,11 +272,12 @@ DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
>  	},
>  
> diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> index cfce8c9..a425a5a 100644
> --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
> +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
> @@ -152,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq(
>  		},
>  	};
>  
> -	return imx_add_platform_device("imx-uart", data->id, res,
> +	return imx_add_platform_device("imx1-uart", data->id, res,
>  			ARRAY_SIZE(res), pdata, sizeof(*pdata));
>  }
>  
> @@ -172,6 +172,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
>  		},
>  	};
>  
> -	return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res),
> -			pdata, sizeof(*pdata));
> +	/* i.mx21 type uart runs on all i.mx expcept i.mx1 */

s/expcept/except/
>  #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
>  #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
> -#define  MX1_UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
> -#define  MX1_UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
> -#define  MX2_UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
> +#define  IMX21_UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select */
>  #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
>  #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
>  #define  UCR4_CTSTL_SHF  10      /* CTS trigger level shift */
> @@ -181,6 +179,18 @@
>  
>  #define UART_NR 8
>  
> +/* i.mx21 type uart runs on all i.mx expcept i.mx1 */

ditto

>  
> +#define UTS (sport->devdata->uts_reg)
> +#define IS_IMX1_UART()	(sport->devdata->devtype == IMX1_UART)
> +#define IS_IMX21_UART()	(sport->devdata->devtype == IMX21_UART)

Can we make this a static inline function?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


More information about the devicetree-discuss mailing list