[PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support
Shawn Guo
shawn.guo at freescale.com
Wed Jul 6 01:35:10 EST 2011
On Mon, Jul 04, 2011 at 12:25:48AM -0600, Grant Likely wrote:
> On Sun, Jul 03, 2011 at 04:30:51PM +0800, Shawn Guo wrote:
> > The patch adds device tree probe support for sdhci-esdhc-imx driver.
> >
> > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Wolfram Sang <w.sang at pengutronix.de>
> > Cc: Chris Ball <cjb at laptop.org>
> > Cc: Grant Likely <grant.likely at secretlab.ca>
> > ---
> > .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 40 ++++++++
> > drivers/mmc/host/sdhci-esdhc-imx.c | 99 +++++++++++++++++++-
> > 2 files changed, 134 insertions(+), 5 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> > new file mode 100644
> > index 0000000..e182e7c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> > @@ -0,0 +1,40 @@
> > +* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
> > +
> > +The Enhanced Secure Digital Host Controller on Freescale i.MX family
> > +provides an interface for MMC, SD, and SDIO types of memory cards.
> > +
> > +Required properties:
> > +- compatible : Should be "fsl,<chip>-esdhc"
> > +- reg : Should contain eSDHC registers location and length
> > +- interrupts : Should contain eSDHC interrupt
> > +- cd-type : String, card detection (CD) method. Supported values are:
>
> Similar to previous comments, use the "fsl," prefix to this property name.
>
I did not know even property name could be written like this. I tried
it and found it works :)
> > + "none" : No CD
> > + "controller" : Uses eSDHC controller internal CD signal
> > + "gpio" : Uses GPIO pin for CD
>
> I would say the presence of a "cd-gpios" property would implicitly
> mean gpio is to be used for the CD pin.
>
Yes, you are right. But I would say this is a direct translation of
the existing platform_data. After all, we are sharing most of code
path between platform and dt.
--
Regards,
Shawn
More information about the devicetree-discuss
mailing list