[PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()

Shawn Guo shawn.guo at freescale.com
Mon Jul 4 19:28:01 EST 2011


On Mon, Jul 04, 2011 at 08:46:03AM +0200, Sascha Hauer wrote:
> On Sun, Jul 03, 2011 at 04:16:56PM +0800, Shawn Guo wrote:
> > The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
> > platform_device_id to distinguish the gpio differences among SoCs.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > Cc: Grant Likely <grant.likely at secretlab.ca>
> > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> >  arch/arm/mach-imx/mm-imx1.c                   |    8 +-
> >  arch/arm/mach-imx/mm-imx21.c                  |   12 +-
> >  arch/arm/mach-imx/mm-imx25.c                  |    8 +-
> >  arch/arm/mach-imx/mm-imx27.c                  |   12 +-
> >  arch/arm/mach-imx/mm-imx31.c                  |    6 +-
> >  arch/arm/mach-imx/mm-imx35.c                  |    6 +-
> >  arch/arm/mach-mx5/mm-mx50.c                   |   12 +-
> >  arch/arm/mach-mx5/mm.c                        |   22 ++--
> >  arch/arm/plat-mxc/devices/platform-gpio-mxc.c |    4 +-
> >  arch/arm/plat-mxc/include/mach/common.h       |    2 +-
> >  drivers/gpio/gpio-mxc.c                       |  123 +++++++++++++++++++++----
> >  11 files changed, 151 insertions(+), 64 deletions(-)
> 
> 
> Summarizing the renames up:
> 
> i.MX1  -> imx1-gpio
> i.MX21 -> imx2-gpio
> i.MX25 -> imx-gpio
> i.MX27 -> imx2-gpio
> i.MX31 -> imx-gpio
> i.MX35 -> imx-gpio
> i.MX50 -> imx-gpio
> i.MX51 -> imx-gpio
> i.MX53 -> imx-gpio
> 
> This is not consitent. Please either use the full SoC name for all
> device ids or use something like imx-gpio-v1, v2...
> It's not good that the i.MX25 is not a imx2 and that the 'modern'
> i.MXs only have imx-gpio. We all know that your hardware designers
> will be creative enough to change the register layout again in the
> future.
> 
Ok, here it is.  It's avoid confusion in machine code, but every
time we add a new soc we need to change touch this table, even if
the new soc has a total compatible gpio to IMX_GPIO.  I'm fine with
either way.

static struct platform_device_id mxc_gpio_devtype[] = {
        {
                .name = "imx1-gpio",
                .driver_data = IMX1_GPIO,
        }, {
                .name = "imx21-gpio",
                .driver_data = IMX2_GPIO,
        }, {
                .name = "imx25-gpio",
                .driver_data = IMX_GPIO,
        }, {
                .name = "imx27-gpio",
                .driver_data = IMX2_GPIO,
        }, {
                .name = "imx31-gpio",
                .driver_data = IMX_GPIO,
        }, {
                .name = "imx35-gpio",
                .driver_data = IMX_GPIO,
        }, {
                .name = "imx50-gpio",
                .driver_data = IMX_GPIO,
        }, {
                .name = "imx51-gpio",
                .driver_data = IMX_GPIO,
        }, {
                .name = "imx53-gpio",
                .driver_data = IMX_GPIO,
        }, {
                /* sentinel */
        }
};

-- 
Regards,
Shawn



More information about the devicetree-discuss mailing list