[PATCH 2/2] serial/imx: add device tree probe support

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Mon Jul 4 19:10:27 EST 2011


On Mon, Jul 04, 2011 at 05:05:27PM +0800, Shawn Guo wrote:
> On Mon, Jul 04, 2011 at 09:38:26AM +0200, Uwe Kleine-König wrote:
> > On Mon, Jul 04, 2011 at 08:58:20AM +0200, Sascha Hauer wrote:
> > > On Sun, Jul 03, 2011 at 03:56:00PM +0800, Shawn Guo wrote:
> > > > It adds device tree probe support for imx tty/serial driver.
> > > > 
> > > > Signed-off-by: Jeremy Kerr <jeremy.kerr at canonical.com>
> > > > Signed-off-by: Jason Liu <jason.hui at linaro.org>
> > > > Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> > > > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > > > Cc: Alan Cox <alan at lxorguk.ukuu.org.uk>
> > > > Cc: Grant Likely <grant.likely at secretlab.ca>
> > > > ---
> > > >  .../bindings/tty/serial/fsl-imx-uart.txt           |   19 +++++
> > > >  drivers/tty/serial/imx.c                           |   82 +++++++++++++++++---
> > > >  2 files changed, 91 insertions(+), 10 deletions(-)
> > > >  create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > > new file mode 100644
> > > > index 0000000..a9c0406
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
> > > > @@ -0,0 +1,19 @@
> > > > +* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
> > > > +
> > > > +Required properties:
> > > > +- compatible : Should be "fsl,<soc>-uart"
> > > > +- reg : Address and length of the register set for the device
> > > > +- interrupts : Should contain uart interrupt
> > > > +
> > > > +Optional properties:
> > > > +- fsl,uart-has-rtscts : Indicate the uart has rts and cts
> > > > +- fsl,irda-mode : Indicate the uart supports irda mode
> > > > +
> > > > +Example:
> > > > +
> > > > +uart at 73fbc000 {
> > > > +	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
> > > > +	reg = <0x73fbc000 0x4000>;
> > > > +	interrupts = <31>;
> > > > +	fsl,uart-has-rtscts;
> > > > +};
> > > > diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> > > > index 983f3bd..483c447 100644
> > > > --- a/drivers/tty/serial/imx.c
> > > > +++ b/drivers/tty/serial/imx.c
> > > > @@ -45,6 +45,8 @@
> > > >  #include <linux/delay.h>
> > > >  #include <linux/rational.h>
> > > >  #include <linux/slab.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_device.h>
> > > >  
> > > >  #include <asm/io.h>
> > > >  #include <asm/irq.h>
> > > > @@ -239,6 +241,12 @@ static struct platform_device_id imx_uart_devtype[] = {
> > > >  	}
> > > >  };
> > > >  
> > > > +static struct of_device_id imx_uart_dt_ids[] = {
> > > > +	{ .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
> > > > +	{ .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX2_UART], },
> > > > +	{ /* sentinel */ },
> > > > +};
> > > 
> > > Isn't this table a bit too small? What about the other SoCs?
> > I'd expect that using fsl,imx21-uart on imx51 would result in a working
> > port, but it feels stange and if that's the intention the example above
> > needs fixing.
> > 
> Here is what I have in dts file for uart.  The 'compatible' tells
> that it's a imx51-uart and compatible with imx21-uart.
> 
> uart0: uart at 73fbc000 {
> 	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
> 	reg = <0x73fbc000 0x4000>;
> 	interrupts = <31>;
> 	fsl,uart-has-rtscts;
> };
/me learned something new about dt. Sorry for the noise.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |


More information about the devicetree-discuss mailing list