[PATCH v2 03/15] x86/dtb: Add a device tree for CE4100
Sebastian Andrzej Siewior
bigeasy at linutronix.de
Wed Jan 5 20:48:32 EST 2011
Cc: devicetree-discuss at lists.ozlabs.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie at gmail.com>
---
Okay I
- dropped device_type except for cpu & pci. I have the compatible string
for pci so I can drop the device_type once it is possible
- I lowercased all compatible types. I will need to resend some patches
which have upper case intel
- The cpu had the same compatible string as the soc node. So I added to
the soc node -immr for internel memory mapped registers.
- I added generic names for all parts.
- I reworked the i2c bars matching the way you suggested. I added a
compatible node for the PCI device which only the PCI ids in its
compatible string. The bars (each represents a complete i2c
controller) have a "intel,ce4100-i2c-controller" compatible node. It
is not used by the driver.
The driver is probed via PCI ids (by the pci subsystem not OF) and
matches the bar address against the ressource in the child node. Once
there is a hit the node is attached.
- The SPI driver is also probed via pci. However I also attached a
compatible property based on PCI ids :)
arch/x86/platform/ce4100/falconfalls.dts | 230 ++++++++++++++++++++++++++++++
1 files changed, 230 insertions(+), 0 deletions(-)
create mode 100644 arch/x86/platform/ce4100/falconfalls.dts
diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts
new file mode 100644
index 0000000..4419864
--- /dev/null
+++ b/arch/x86/platform/ce4100/falconfalls.dts
@@ -0,0 +1,230 @@
+/*
+ * CE4100 on Falcon Falls
+ *
+ * (c) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+/dts-v1/;
+/ {
+ model = "Intel,FalconFalls";
+ compatible = "intel,falconfalls";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "intel,ce4100";
+ reg = <0>;
+ lapic = <&lapic0>;
+ };
+ };
+
+ soc at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,ce4100-immr";
+ ranges;
+
+ ioapic1: pic at fec00000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ioapic";
+ interrupt-controller;
+ id = <1>;
+ reg = <0xfec00000 0x1000>;
+ };
+
+ timer at fed00000 {
+ compatible = "intel,hpet-ce4100", "intel,hpet";
+ reg = <0xfed00000 0x200>;
+ };
+
+ lapic0: interrupt-controller at fee00000 {
+ compatible = "intel,lapic-ce4100", "intel,lapic";
+ reg = <0xfee00000 0x1000>;
+ };
+
+ pci at 3fc {
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci", "pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
+ 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
+ 0x0000000 0 0x0 0x0 0 0x100>;
+
+ isa at 0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "isa";
+ ranges = <1 0 0 0 0 0x100>;
+
+ rtc at 70 {
+ compatible = "motorola,mc146818";
+ interrupts = <8 3>;
+ interrupt-parent = <&ioapic1>;
+ ctrl-reg = <2>;
+ freq-reg = <0x26>;
+ reg = <1 0x70 2>;
+ };
+ };
+
+ /* Secondary IO-APIC */
+ ioapic2: pic at bffff000 {
+ #interrupt-cells = <2>;
+ compatible = "intel,ioapic-ce4100", "intel,ioapic";
+ interrupt-controller;
+ id = <2>;
+ reg = <0x100 0x0 0x0 0x0 0x0>;
+ assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
+ };
+
+ pci at av {
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ compatible = "intel,ce4100-pci";
+ device_type = "pci";
+ bus-range = <1 1>;
+ ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
+
+ interrupt-map-mask = <0xffffff 0x0 0x0 0x0>;
+ interrupt-map = <
+ /* GFX: 0x2E5B */
+ 0x11000 0x0 0x0 0x0 &ioapic2 0 0x1
+ /* ***** FIXME ****** Compositing Engine: 0x2E72 */
+ /* 0x11100 0x0 0x0 0x1 &ioapic2 0 0x1 */
+ /* MFD: 0x2E5C */
+ 0x11800 0x0 0x0 0x0 &ioapic2 2 0x1
+ /* TS Prefilter: 0x2E5D */
+ 0x12000 0x0 0x0 0x0 &ioapic2 4 0x1
+ /* TS Demux: 0x2E5E */
+ 0x12100 0x0 0x0 0x0 &ioapic2 5 0x1
+ /* ***** FIXME ***** Audio DSP: 0x2E5F */
+ /* 0x13000 0x0 0x0 0x1 &ioapic2 0 0x1 */
+ /* Audio Interfaces: 0x2E60 */
+ 0x13200 0x0 0x0 0x0 &ioapic2 8 0x1
+ /* VDC: 0x2E61 */
+ 0x14000 0x0 0x0 0x0 &ioapic2 9 0x1
+ /* DPE: 0x2E62 */
+ 0x14100 0x0 0x0 0x0 &ioapic2 10 0x1
+ /* HDMI Tx: 0x2E63 */
+ 0x14200 0x0 0x0 0x0 &ioapic2 11 0x1
+ /* SEC: 0x2E64 */
+ 0x14800 0x0 0x0 0x0 &ioapic2 12 0x1
+ /* EXP: 0x2E65 */
+ 0x15000 0x0 0x0 0x0 &ioapic2 13 0x1
+ /* UART0/1: 0x2E66 */
+ 0x15800 0x0 0x0 0x0 &ioapic2 14 0x1
+ /* GPIO: 0x2E67 */
+ 0x15900 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* I2C0/1/2: 0x2E68 */
+ 0x15a00 0x0 0x0 0x0 &ioapic2 16 0x1
+ /* Smart Card 0/1: 0x2E69 */
+ 0x15b00 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* SPI: 0x2E6A */
+ 0x15c00 0x0 0x0 0x0 &ioapic2 15 0x1
+ /* MSPOD: 0x2E6B */
+ 0x15d00 0x0 0x0 0x0 &ioapic2 19 0x1
+ /* IR: 0x2E6C */
+ 0x15e00 0x0 0x0 0x0 &ioapic2 16 0x1
+ /* **** FIXME ***** DFX: 0x2E6D */
+ /* 0x15f00 0x0 0x0 0x1 &ioapic2 0x0 0x1 */
+ /* Gig Ethernet: 0x2E6E */
+ 0x16000 0x0 0x0 0x0 &ioapic2 21 0x1
+ /* IEEE1588 and Clock Recovery Unit: 0x2E6F */
+ 0x16100 0x0 0x0 0x0 &ioapic2 3 0x1
+ /* USB0: 0x2E70 */
+ 0x16800 0x0 0x0 0x0 &ioapic2 22 0x3
+ /* USB1: 0x2E70 */
+ 0x16900 0x0 0x0 0x0 &ioapic2 22 0x3
+ /* SATA: 0x2E71 */
+ 0x17000 0x0 0x0 0x0 &ioapic2 23 0x3
+ >;
+
+ i2c-controller at 15a00,0,0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "pci8086,2e68.2",
+ "pci8086,2e68",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15a00 0x0 0x0 0x0 0x0>;
+ ranges = <0 0 0x02000000 0 0xdffe0500 0x100
+ 1 0 0x02000000 0 0xdffe0600 0x100
+ 2 0 0x02000000 0 0xdffe0700 0x100>;
+
+ i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <0 0 0x100>;
+ };
+
+ i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <1 0 0x100>;
+
+ gpio at 26 {
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ };
+ };
+
+ i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ce4100-i2c-controller";
+ reg = <2 0 0x100>;
+
+ gpio at 26 {
+ compatible = "ti,pcf8575";
+ reg = <0x26>;
+ };
+ };
+ };
+
+ spi-controller at 15c00,0,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible =
+ "pci8086,2e6a.2",
+ "pci8086,2e6a",
+ "pciclass,ff0000",
+ "pciclass,ff00";
+
+ reg = <0x15c00 0x0 0x0 0x0 0x0>;
+
+ dac at 0 {
+ compatible = "ti,pcm1755";
+ reg = <0>;
+ spi-max-frequency = <115200>;
+ };
+
+ dac at 1 {
+ compatible = "ti,pcm1609a";
+ reg = <1>;
+ spi-max-frequency = <115200>;
+ };
+
+ eeprom at 2 {
+ compatible = "atmel,at93c46";
+ reg = <2>;
+ spi-max-frequency = <115200>;
+ };
+ };
+ };
+ };
+ };
+};
--
1.7.3.2
More information about the devicetree-discuss
mailing list