[PATCH V11 2/4] ptp: Added a clock that uses the eTSEC found on the MPC85xx.
Grant Likely
grant.likely at secretlab.ca
Thu Feb 24 03:50:58 EST 2011
On Wed, Feb 23, 2011 at 11:38:17AM +0100, Richard Cochran wrote:
> The eTSEC includes a PTP clock with quite a few features. This patch adds
> support for the basic clock adjustment functions, plus two external time
> stamps, one alarm, and the PPS callback.
>
> Signed-off-by: Richard Cochran <richard.cochran at omicron.at>
> Acked-by: John Stultz <johnstul at us.ibm.com>
> ---
> .../devicetree/bindings/net/fsl-tsec-phy.txt | 57 +++
> arch/powerpc/boot/dts/mpc8313erdb.dts | 14 +
> arch/powerpc/boot/dts/mpc8572ds.dts | 14 +
> arch/powerpc/boot/dts/p2020ds.dts | 14 +
> arch/powerpc/boot/dts/p2020rdb.dts | 14 +
> drivers/net/Makefile | 1 +
> drivers/net/gianfar_ptp.c | 448 ++++++++++++++++++++
> drivers/net/gianfar_ptp_reg.h | 113 +++++
> drivers/ptp/Kconfig | 13 +
> 9 files changed, 688 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/gianfar_ptp.c
> create mode 100644 drivers/net/gianfar_ptp_reg.h
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
> index edb7ae1..f6edbb8 100644
> --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
> @@ -74,3 +74,60 @@ Example:
> interrupt-parent = <&mpic>;
> phy-handle = <&phy0>
> };
> +
> +* Gianfar PTP clock nodes
> +
> +General Properties:
> +
> + - compatible Should be "fsl,etsec-ptp"
Should specify an *exact* part; ie: "fsl,mpc8313-etsec-ptp" instead of
trying to define a generic catchall. The reason is that the same
marketing name can end up getting applied to a wide range of parts.
Instead, choose one specific device to stand in as the 'common'
implementation and get all parts with the same core to claim
compatibility with it. ie: a p2020 might have:
compatible = "fsl,mpc2020-etsec-ptp", "fsl,mpc8313-etsec-ptp";
> + - reg Offset and length of the register set for the device
> + - interrupts There should be at least two interrupts. Some devices
> + have as many as four PTP related interrupts.
> +
> +Clock Properties:
> +
> + - tclk-period Timer reference clock period in nanoseconds.
> + - tmr-prsc Prescaler, divides the output clock.
> + - tmr-add Frequency compensation value.
> + - cksel 0= external clock, 1= eTSEC system clock, 3= RTC clock input.
> + Currently the driver only supports choice "1".
I'd be hesitant about defining something that isn't actually
implemented yet. You may find the binding to be insufficient at a
later date.
> + - tmr-fiper1 Fixed interval period pulse generator.
> + - tmr-fiper2 Fixed interval period pulse generator.
> + - max-adj Maximum frequency adjustment in parts per billion.
These are all custom properties (not part of any shared binding) so
they should probably be prefixed with 'fsl,'.
> +
> + These properties set the operational parameters for the PTP
> + clock. You must choose these carefully for the clock to work right.
> + Here is how to figure good values:
> +
> + TimerOsc = system clock MHz
> + tclk_period = desired clock period nanoseconds
> + NominalFreq = 1000 / tclk_period MHz
> + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
> + tmr_add = ceil(2^32 / FreqDivRatio)
> + OutputClock = NominalFreq / tmr_prsc MHz
> + PulseWidth = 1 / OutputClock microseconds
> + FiperFreq1 = desired frequency in Hz
> + FiperDiv1 = 1000000 * OutputClock / FiperFreq1
> + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
> + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
> +
> + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
> + driver expects that tmr_fiper1 will be correctly set to produce a 1
> + Pulse Per Second (PPS) signal, since this will be offered to the PPS
> + subsystem to synchronize the Linux clock.
Good documentation, thanks. Question though, how many of these values
will the end user (or board builder) be likely to want to change. It
is risky encoding the calculation results into the device tree when
they aren't the actually parameters that will be manipulated, or at
least very user-unfriendly.
> +
> +Example:
> +
> + ptp_clock at 24E00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24E00 0xB0>;
> + interrupts = <12 0x8 13 0x8>;
> + interrupt-parent = < &ipic >;
> + tclk-period = <10>;
> + tmr-prsc = <100>;
> + tmr-add = <0x999999A4>;
> + cksel = <0x1>;
> + tmr-fiper1 = <0x3B9AC9F6>;
> + tmr-fiper2 = <0x00018696>;
> + max-adj = <659999998>;
> + };
> diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
> index 183f2aa..85a7eaa 100644
> --- a/arch/powerpc/boot/dts/mpc8313erdb.dts
> +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
> @@ -208,6 +208,20 @@
> sleep = <&pmc 0x00300000>;
> };
>
> + ptp_clock at 24E00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24E00 0xB0>;
> + interrupts = <12 0x8 13 0x8>;
> + interrupt-parent = < &ipic >;
> + tclk-period = <10>;
> + tmr-prsc = <100>;
> + tmr-add = <0x999999A4>;
> + cksel = <0x1>;
> + tmr-fiper1 = <0x3B9AC9F6>;
> + tmr-fiper2 = <0x00018696>;
> + max-adj = <659999998>;
> + };
> +
> enet0: ethernet at 24000 {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
> index cafc128..74208cd 100644
> --- a/arch/powerpc/boot/dts/mpc8572ds.dts
> +++ b/arch/powerpc/boot/dts/mpc8572ds.dts
> @@ -324,6 +324,20 @@
> };
> };
>
> + ptp_clock at 24E00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24E00 0xB0>;
> + interrupts = <68 2 69 2 70 2 71 2>;
> + interrupt-parent = < &mpic >;
> + tclk-period = <5>;
> + tmr-prsc = <200>;
> + tmr-add = <0xAAAAAAAB>;
> + cksel = <1>;
> + tmr-fiper1 = <0x3B9AC9FB>;
> + tmr-fiper2 = <0x3B9AC9FB>;
> + max-adj = <499999999>;
> + };
> +
> enet0: ethernet at 24000 {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
> index 1101914..39d73bb 100644
> --- a/arch/powerpc/boot/dts/p2020ds.dts
> +++ b/arch/powerpc/boot/dts/p2020ds.dts
> @@ -336,6 +336,20 @@
> phy_type = "ulpi";
> };
>
> + ptp_clock at 24E00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24E00 0xB0>;
> + interrupts = <68 2 69 2 70 2>;
> + interrupt-parent = < &mpic >;
> + tclk-period = <5>;
> + tmr-prsc = <200>;
> + tmr-add = <0xCCCCCCCD>;
> + cksel = <1>;
> + tmr-fiper1 = <0x3B9AC9FB>;
> + tmr-fiper2 = <0x0001869B>;
> + max-adj = <249999999>;
> + };
> +
> enet0: ethernet at 24000 {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
> index da4cb0d..5498fb9 100644
> --- a/arch/powerpc/boot/dts/p2020rdb.dts
> +++ b/arch/powerpc/boot/dts/p2020rdb.dts
> @@ -396,6 +396,20 @@
> phy_type = "ulpi";
> };
>
> + ptp_clock at 24E00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24E00 0xB0>;
> + interrupts = <68 2 69 2 70 2>;
> + interrupt-parent = < &mpic >;
> + tclk-period = <5>;
> + tmr-prsc = <200>;
> + tmr-add = <0xCCCCCCCD>;
> + cksel = <1>;
> + tmr-fiper1 = <0x3B9AC9FB>;
> + tmr-fiper2 = <0x0001869B>;
> + max-adj = <249999999>;
> + };
> +
> enet0: ethernet at 24000 {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index b90738d..c303f5f 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_ATL2) += atlx/
> obj-$(CONFIG_ATL1E) += atl1e/
> obj-$(CONFIG_ATL1C) += atl1c/
> obj-$(CONFIG_GIANFAR) += gianfar_driver.o
> +obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
> obj-$(CONFIG_TEHUTI) += tehuti.o
> obj-$(CONFIG_ENIC) += enic/
> obj-$(CONFIG_JME) += jme.o
> diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/gianfar_ptp.c
> new file mode 100644
> index 0000000..84fff15
> --- /dev/null
> +++ b/drivers/net/gianfar_ptp.c
> @@ -0,0 +1,448 @@
> +/*
> + * PTP 1588 clock using the eTSEC
> + *
> + * Copyright (C) 2010 OMICRON electronics GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +#include <linux/device.h>
> +#include <linux/hrtimer.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/timex.h>
> +#include <linux/io.h>
> +
> +#include <linux/ptp_clock_kernel.h>
> +
> +#include "gianfar_ptp_reg.h"
> +#include "gianfar.h"
> +
> +#define DRIVER "gianfar_ptp"
> +#define N_ALARM 1 /* first alarm is used internally to reset fipers */
> +#define N_EXT_TS 2
> +#define REG_SIZE sizeof(struct gianfar_ptp_registers)
> +
> +struct etsects {
> + struct gianfar_ptp_registers *regs;
> + struct ptp_clock *clock;
> + struct ptp_clock_info caps;
> + int irq;
> + u64 alarm_interval; /* for periodic alarm */
> + u64 alarm_value;
> + u32 tclk_period; /* nanoseconds */
> + u32 tmr_prsc;
> + u32 tmr_add;
> + u32 cksel;
> + u32 tmr_fiper1;
> + u32 tmr_fiper2;
> +};
> +
> +/* Private globals */
> +static struct etsects the_clock;
> +DEFINE_SPINLOCK(register_lock);
> +
> +/*
> + * Register access functions
> + */
> +
> +static u64 tmr_cnt_read(struct etsects *etsects)
> +{
> + u64 ns;
> + u32 lo, hi;
> +
> + lo = gfar_read(&etsects->regs->tmr_cnt_l);
> + hi = gfar_read(&etsects->regs->tmr_cnt_h);
> + ns = ((u64) hi) << 32;
> + ns |= lo;
> + return ns;
> +}
> +
> +static void tmr_cnt_write(struct etsects *etsects, u64 ns)
> +{
> + u32 hi = ns >> 32;
> + u32 lo = ns & 0xffffffff;
> +
> + gfar_write(&etsects->regs->tmr_cnt_l, lo);
> + gfar_write(&etsects->regs->tmr_cnt_h, hi);
> +}
> +
> +static void set_alarm(struct etsects *etsects)
> +{
> + u64 ns;
> + u32 lo, hi;
> +
> + ns = tmr_cnt_read(etsects) + 1500000000ULL;
> + ns = div_u64(ns, 1000000000UL) * 1000000000ULL;
> + ns -= etsects->tclk_period;
> + hi = ns >> 32;
> + lo = ns & 0xffffffff;
> + gfar_write(&etsects->regs->tmr_alarm1_l, lo);
> + gfar_write(&etsects->regs->tmr_alarm1_h, hi);
> +}
> +
> +static void set_fipers(struct etsects *etsects)
> +{
> + u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl);
> +
> + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE));
> + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
> + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
> + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
> + set_alarm(etsects);
> + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE);
> +}
> +
> +/*
> + * Interrupt service routine
> + */
> +
> +static irqreturn_t isr(int irq, void *priv)
> +{
> + struct etsects *etsects = priv;
> + struct ptp_clock_event event;
> + u64 ns;
> + u32 ack = 0, lo, hi, mask, val;
> +
> + val = gfar_read(&etsects->regs->tmr_tevent);
> +
> + if (val & ETS1) {
> + ack |= ETS1;
> + hi = gfar_read(&etsects->regs->tmr_etts1_h);
> + lo = gfar_read(&etsects->regs->tmr_etts1_l);
> + event.type = PTP_CLOCK_EXTTS;
> + event.index = 0;
> + event.timestamp = ((u64) hi) << 32;
> + event.timestamp |= lo;
> + ptp_clock_event(etsects->clock, &event);
> + }
> +
> + if (val & ETS2) {
> + ack |= ETS2;
> + hi = gfar_read(&etsects->regs->tmr_etts2_h);
> + lo = gfar_read(&etsects->regs->tmr_etts2_l);
> + event.type = PTP_CLOCK_EXTTS;
> + event.index = 1;
> + event.timestamp = ((u64) hi) << 32;
> + event.timestamp |= lo;
> + ptp_clock_event(etsects->clock, &event);
> + }
> +
> + if (val & ALM2) {
> + ack |= ALM2;
> + if (etsects->alarm_value) {
> + event.type = PTP_CLOCK_ALARM;
> + event.index = 0;
> + event.timestamp = etsects->alarm_value;
> + ptp_clock_event(etsects->clock, &event);
> + }
> + if (etsects->alarm_interval) {
> + ns = etsects->alarm_value + etsects->alarm_interval;
> + hi = ns >> 32;
> + lo = ns & 0xffffffff;
> + spin_lock(®ister_lock);
> + gfar_write(&etsects->regs->tmr_alarm2_l, lo);
> + gfar_write(&etsects->regs->tmr_alarm2_h, hi);
> + spin_unlock(®ister_lock);
> + etsects->alarm_value = ns;
> + } else {
> + gfar_write(&etsects->regs->tmr_tevent, ALM2);
> + spin_lock(®ister_lock);
> + mask = gfar_read(&etsects->regs->tmr_temask);
> + mask &= ~ALM2EN;
> + gfar_write(&etsects->regs->tmr_temask, mask);
> + spin_unlock(®ister_lock);
> + etsects->alarm_value = 0;
> + etsects->alarm_interval = 0;
> + }
> + }
> +
> + if (val & PP1) {
> + ack |= PP1;
> + event.type = PTP_CLOCK_PPS;
> + ptp_clock_event(etsects->clock, &event);
> + }
> +
> + if (ack) {
> + gfar_write(&etsects->regs->tmr_tevent, ack);
> + return IRQ_HANDLED;
> + } else
> + return IRQ_NONE;
> +}
> +
> +/*
> + * PTP clock operations
> + */
> +
> +static int ptp_gianfar_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
> +{
> + u64 adj;
> + u32 diff, tmr_add;
> + int neg_adj = 0;
> + struct etsects *etsects = container_of(ptp, struct etsects, caps);
> +
> + if (ppb < 0) {
> + neg_adj = 1;
> + ppb = -ppb;
> + }
> + tmr_add = etsects->tmr_add;
> + adj = tmr_add;
> + adj *= ppb;
> + diff = div_u64(adj, 1000000000ULL);
> +
> + tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
> +
> + gfar_write(&etsects->regs->tmr_add, tmr_add);
> +
> + return 0;
> +}
> +
> +static int ptp_gianfar_adjtime(struct ptp_clock_info *ptp, s64 delta)
> +{
> + s64 now;
> + unsigned long flags;
> + struct etsects *etsects = container_of(ptp, struct etsects, caps);
> +
> + spin_lock_irqsave(®ister_lock, flags);
> +
> + now = tmr_cnt_read(etsects);
> + now += delta;
> + tmr_cnt_write(etsects, now);
> +
> + spin_unlock_irqrestore(®ister_lock, flags);
> +
> + set_fipers(etsects);
> +
> + return 0;
> +}
> +
> +static int ptp_gianfar_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
> +{
> + u64 ns;
> + u32 remainder;
> + unsigned long flags;
> + struct etsects *etsects = container_of(ptp, struct etsects, caps);
> +
> + spin_lock_irqsave(®ister_lock, flags);
> +
> + ns = tmr_cnt_read(etsects);
> +
> + spin_unlock_irqrestore(®ister_lock, flags);
> +
> + ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
> + ts->tv_nsec = remainder;
> + return 0;
> +}
> +
> +static int ptp_gianfar_settime(struct ptp_clock_info *ptp,
> + const struct timespec *ts)
> +{
> + u64 ns;
> + unsigned long flags;
> + struct etsects *etsects = container_of(ptp, struct etsects, caps);
> +
> + ns = ts->tv_sec * 1000000000ULL;
> + ns += ts->tv_nsec;
> +
> + spin_lock_irqsave(®ister_lock, flags);
> +
> + tmr_cnt_write(etsects, ns);
> + set_fipers(etsects);
> +
> + spin_unlock_irqrestore(®ister_lock, flags);
> +
> + return 0;
> +}
> +
> +static int ptp_gianfar_enable(struct ptp_clock_info *ptp,
> + struct ptp_clock_request *rq, int on)
> +{
> + struct etsects *etsects = container_of(ptp, struct etsects, caps);
> + unsigned long flags;
> + u32 bit, mask;
> +
> + switch (rq->type) {
> + case PTP_CLK_REQ_EXTTS:
> + switch (rq->extts.index) {
> + case 0:
> + bit = ETS1EN;
> + break;
> + case 1:
> + bit = ETS2EN;
> + break;
> + default:
> + return -EINVAL;
> + }
> + spin_lock_irqsave(®ister_lock, flags);
> + mask = gfar_read(&etsects->regs->tmr_temask);
> + if (on)
> + mask |= bit;
> + else
> + mask &= ~bit;
> + gfar_write(&etsects->regs->tmr_temask, mask);
> + spin_unlock_irqrestore(®ister_lock, flags);
> + return 0;
> +
> + case PTP_CLK_REQ_PPS:
> + spin_lock_irqsave(®ister_lock, flags);
> + mask = gfar_read(&etsects->regs->tmr_temask);
> + if (on)
> + mask |= PP1EN;
> + else
> + mask &= ~PP1EN;
> + gfar_write(&etsects->regs->tmr_temask, mask);
> + spin_unlock_irqrestore(®ister_lock, flags);
> + return 0;
> +
> + default:
> + break;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static struct ptp_clock_info ptp_gianfar_caps = {
> + .owner = THIS_MODULE,
> + .name = "gianfar clock",
> + .max_adj = 512000,
> + .n_alarm = N_ALARM,
> + .n_ext_ts = N_EXT_TS,
> + .n_per_out = 0,
> + .pps = 1,
> + .adjfreq = ptp_gianfar_adjfreq,
> + .adjtime = ptp_gianfar_adjtime,
> + .gettime = ptp_gianfar_gettime,
> + .settime = ptp_gianfar_settime,
> + .enable = ptp_gianfar_enable,
> +};
> +
> +/* OF device tree */
> +
> +static int get_of_u32(struct device_node *node, char *str, u32 *val)
> +{
> + int plen;
> + const u32 *prop = of_get_property(node, str, &plen);
> +
> + if (!prop || plen != sizeof(*prop))
> + return -1;
> + *val = *prop;
> + return 0;
> +}
> +
> +static int gianfar_ptp_probe(struct platform_device *dev,
> + const struct of_device_id *match)
> +{
> + struct device_node *node = dev->dev.of_node;
> + struct etsects *etsects = &the_clock;
> + struct timespec now;
> + u32 tmr_ctrl;
> +
> + etsects->caps = ptp_gianfar_caps;
> +
> + if (get_of_u32(node, "tclk-period", &etsects->tclk_period) ||
> + get_of_u32(node, "tmr-prsc", &etsects->tmr_prsc) ||
> + get_of_u32(node, "tmr-add", &etsects->tmr_add) ||
> + get_of_u32(node, "cksel", &etsects->cksel) ||
> + get_of_u32(node, "tmr-fiper1", &etsects->tmr_fiper1) ||
> + get_of_u32(node, "tmr-fiper2", &etsects->tmr_fiper2) ||
> + get_of_u32(node, "max-adj", &etsects->caps.max_adj)) {
> + pr_err("device tree node missing required elements\n");
> + return -ENODEV;
> + }
> +
> + etsects->irq = irq_of_parse_and_map(node, 0);
Use platform_get_irq().
> +
> + if (etsects->irq == NO_IRQ) {
> + pr_err("irq not in device tree\n");
> + return -ENODEV;
> + }
> + if (request_irq(etsects->irq, isr, 0, DRIVER, etsects)) {
> + pr_err("request_irq failed\n");
> + return -ENODEV;
> + }
> + etsects->regs = of_iomap(node, 0);
Use platform_get_resource(), and don't forget to request the
resources.
> + if (!etsects->regs) {
> + pr_err("of_iomap ptp registers failed\n");
> + return -EINVAL;
> + }
> + getnstimeofday(&now);
> + ptp_gianfar_settime(&etsects->caps, &now);
> +
> + tmr_ctrl =
> + (etsects->tclk_period & TCLK_PERIOD_MASK) << TCLK_PERIOD_SHIFT |
> + (etsects->cksel & CKSEL_MASK) << CKSEL_SHIFT;
> +
> + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl);
> + gfar_write(&etsects->regs->tmr_add, etsects->tmr_add);
> + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
> + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
> + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
> + set_alarm(etsects);
> + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE);
> +
> + etsects->clock = ptp_clock_register(&etsects->caps);
> +
> + return IS_ERR(etsects->clock) ? PTR_ERR(etsects->clock) : 0;
> +}
> +
> +static int gianfar_ptp_remove(struct platform_device *dev)
> +{
> + gfar_write(&the_clock.regs->tmr_temask, 0);
> + gfar_write(&the_clock.regs->tmr_ctrl, 0);
> +
> + ptp_clock_unregister(the_clock.clock);
> + free_irq(the_clock.irq, &the_clock);
> + iounmap(the_clock.regs);
> +
> + return 0;
> +}
> +
> +static struct of_device_id match_table[] = {
> + { .compatible = "fsl,etsec-ptp" },
> + {},
> +};
> +
> +static struct of_platform_driver gianfar_ptp_driver = {
Use a platform_driver instead. of_platform_driver is deprecated and
being removed.
> + .driver = {
> + .name = "gianfar_ptp",
> + .of_match_table = match_table,
> + .owner = THIS_MODULE,
> + },
> + .probe = gianfar_ptp_probe,
> + .remove = gianfar_ptp_remove,
> +};
> +
> +/* module operations */
> +
> +static int __init ptp_gianfar_init(void)
> +{
> + return of_register_platform_driver(&gianfar_ptp_driver);
> +}
> +
> +module_init(ptp_gianfar_init);
> +
> +static void __exit ptp_gianfar_exit(void)
> +{
> + of_unregister_platform_driver(&gianfar_ptp_driver);
> +}
> +
> +module_exit(ptp_gianfar_exit);
> +
> +MODULE_AUTHOR("Richard Cochran <richard.cochran at omicron.at>");
> +MODULE_DESCRIPTION("PTP clock using the eTSEC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/net/gianfar_ptp_reg.h b/drivers/net/gianfar_ptp_reg.h
> new file mode 100644
> index 0000000..95e171f
> --- /dev/null
> +++ b/drivers/net/gianfar_ptp_reg.h
This data is only used by gianfar_ptp.c, so there is no need for a
separate include file. Move the contents of gianfar_ptp_reg.h into
gianfar_ptp.c
g.
More information about the devicetree-discuss
mailing list